ZTE-DSL-LINE-EXT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

zxAdslLineTable

table

.1.3.6.1.4.1.3902.1004.4.1.1 · 1 row entry · 8 columns

Open in standard view

Adsl line additional information table.

zxAdslLineEntry entry .1.3.6.1.4.1.3902.1004.4.1.1.1

Adsl line additional information entry

Indexes

IF-MIBifIndex

Column Syntax OID

zxAdslLinePMConfPMSF

This configuration parameter defines the line states to be forced by
the near-end ATU on this line. It is coded as an integer value with
following definition:
L0_FullOn Force the line to transition from the L3 i…

Enumerationr/w

Enumerated Values:

1	l0_FullOn
3	l2_LowPower
4	l3_Idle

.1.3.6.1.4.1.3902.1004.4.1.1.1.1

zxAdslLinePMState

The Line has four possible power management states, numbered 0 to 3
and corresponding to respectively:

L0 - Synchronized - This Line state (L0) is when the Line has
full transmission (i.e. …

Enumeration

Enumerated Values:

1	l0_FullOn
2	l1_LowPower
3	l2_LowPower
4	l3_Idle

.1.3.6.1.4.1.3902.1004.4.1.1.1.2

zxAdslLineDMTTrellis deprecated

Parameter that indicates whether trellis coding has been enabled or
disabled.Trellis coding should always be enabled for its clear
performancen advantage.Trellis coding is mandatory for ADSL/ADSL2plus.

Enumeration

Enumerated Values:

0	unknown
1	on
2	off

.1.3.6.1.4.1.3902.1004.4.1.1.1.3

zxAdslLineTxAtmCells

Transmitted ATM cell counter.This is a count of total data cells
only transmitted by ATU-C.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1004.4.1.1.1.4

zxAdslLineRxAtmCells

Received ATM cell counter.This is a count of total data cells
only received by ATU-C.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1004.4.1.1.1.5

zxAdslLineIdleCells

Number of idle cells transmitted/recieved by ATU-C.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1004.4.1.1.1.6

zxAdslLineTxDataRate

Transmitted net data rate on this line.

kbpsSNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1004.4.1.1.1.7

zxAdslLineRxDataRate

Recieved net data rate on this line.

kbpsSNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1004.4.1.1.1.8

zxAdslLineConfProfileExtTable

table

.1.3.6.1.4.1.3902.1004.4.1.2 · 1 row entry · 18 columns

Open in standard view

Adsl line config profile extended information table.

zxAdslLineConfProfileExtEntry entry .1.3.6.1.4.1.3902.1004.4.1.2.1

An entry extends the adslLineConfProfileEntry defined in
[RFC2662]. Each entry corresponds to an ADSL line profile.

Indexes

No indexes recorded

Column Syntax OID

zxAdslLineDMTConfTrellis deprecated

Parameter that enable or disable trellis coding. Trellis coding
should always be enabled for its clear performancen advantage.
Trellis coding is mandatory for ADSL/ADSL2plus.
The value on(1) is default for all Annexes …

Enumerationr/w

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.3902.1004.4.1.2.1.1

zxAdslAtucConfMaxBitsPerBin

Specifies maximum Rx number of bits per bin.

Integer32r/w

Constraints:
range: 0-15

.1.3.6.1.4.1.3902.1004.4.1.2.1.2

zxAdslAtucConfTxStartBin

Specifies lowest bin number allowed for Tx signal.
Different line coding type has different default value.
0x20 (default for Annex A only)
0x20 (default for ADSL2/ADSL2plus)
0x06 (default for Annex A if G.Span …

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1004.4.1.2.1.3

zxAdslAtucConfTxEndBin

Specifies highest bin number allowed for Tx signal.
Default = 0x3ff (default for all Annexes and ADSL2/ADSL2plus)

Integer32r/w

Constraints:
range: 0-512

.1.3.6.1.4.1.3902.1004.4.1.2.1.4

zxAdslAtucConfRxStartBin

Specifies lowest bin number allowed for Rx signal.
Different line coding type has different default value.
0x06 (default for Annex A)
0x01 (default for Annex B)
0x06 (default for Annex C/C.x)
0x06 (default f…

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1004.4.1.2.1.5

zxAdslAtucConfRxEndBin

Specifies highest bin number allowed for Rx signal.
Default = 0x3f (default for all Annexes and ADSL2/ADLS2plus)

Integer32r/w

Constraints:
range: 0-512

.1.3.6.1.4.1.3902.1004.4.1.2.1.6

zxAdslAtucConfUseCustomBins

Enable or disable custom bin selection for upstream/downstream
transmission. This parameter is used in conjunction with the
adslAtucDMTConfFreqBins and
adslAturDMTConfFreqBins[ADSL-DMT-LINE-MIB] parameter.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.3902.1004.4.1.2.1.7

zxAdslAtucConfDnBitSwap

enables/disables downstream bit swapping.
Different line coding type has different default value.
disable(2) (default for ADSL2/ADLS2plus, Annex B, Annex C
C.x, G.Span/ADSL+ and G.Span Plus)
en…

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.3902.1004.4.1.2.1.8

zxAdslAtucConfUpBitSwap

enables/disables upstream bit swapping.
Different line coding type has different default value.
disable(2) (default for ADSL2/ADLS2plus, Annex B, Annex C
C.x, G.Span/ADSL+ and G.Span Plus)
enab…

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.3902.1004.4.1.2.1.9

zxAdslAtucConfREADSL2Enable deprecated

Defines whether downstream READSL2 operation should be forced
by the ATU-C.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.3902.1004.4.1.2.1.10

zxAdslAtucConfPsdMaskType

It is supported by G.Span. Dsl card team will provide files
about it in details.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1004.4.1.2.1.11

zxAdslAtucConfPMMode

This configuration parameter defines the line states the ATU-C
may autonomously transition to on this line. It is coded in a
bit map representation (0 if not allowed, 1 if allowed) with
following definition:
Bit 0…

Bitsr/w

Enumerated Values:

0	idle
1	lowPower

.1.3.6.1.4.1.3902.1004.4.1.2.1.12

zxAdslAtucConfPML0Time

PM configuration parameter,related to the L2 low power state.
This parameter represents the minimum time between an exit from
the L2 state and the next entry into the L2 state.

secondsInteger32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.3902.1004.4.1.2.1.13

zxAdslAtucConfPML2Time

PM configuration parameter,related to the L2 low power state.
This parameter represents the minimum time between an entry into
the L2 state and the first Power Trim in the L2 state and between
two consecutive Power Tri…

secondsInteger32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.3902.1004.4.1.2.1.14

zxAdslAtucConfPML2ATPR

PM configuration parameter,related to the L2 low power state.
This parameter represents the Maximum Aggregate Transmit Power
Reduction (in dB) that can be performed through a single Power
Trim in the L2 state. It range…

dBInteger32r/w

Constraints:
range: 0-31

.1.3.6.1.4.1.3902.1004.4.1.2.1.15

zxAdslAtucConfPML2Rate

PM configuration parameter,related to the L2 low power state.
This parameter specifies the minimum net data rate during the
low power state (L2).

kbpsInteger32r/w

Constraints:
range: 256-1024

.1.3.6.1.4.1.3902.1004.4.1.2.1.16

zxAdsl2ConfMinProtectionDs

Minimum Impulse Noise Protection on Downstream direction. The
minimum impulse noise protection for the bearer channel,
expressed in symbols. The parameter can take the following
values: noProtection (i.e., INP not req…

symbolsEnumerationr/w

Enumerated Values:

1	noProtection
2	halfSymbol
3	singleSymbol
4	twoSymbols
5	fourSymbols
6	eightSymbols
7	sixteenSymbols

.1.3.6.1.4.1.3902.1004.4.1.2.1.20

zxAdsl2ConfMinProtectionUs

Minimum Impulse Noise Protection on Upstream direction. The
minimum impulse noise protection for the bearer channel,
expressed in symbols.

symbolsEnumerationr/w

Enumerated Values:

1	noProtection
2	halfSymbol
3	singleSymbol
4	twoSymbols
5	fourSymbols
6	eightSymbols
7	sixteenSymbols

.1.3.6.1.4.1.3902.1004.4.1.2.1.21

zxAdslAtucPhysTable

table

.1.3.6.1.4.1.3902.1004.4.1.3 · 1 row entry · 4 columns

Open in standard view

This table provides one row for each ATUC
Each row contains the Physical Layer Parameters
table for that ATUC. ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94).

zxAdslAtucPhysEntry entry .1.3.6.1.4.1.3902.1004.4.1.3.1

Adsl physical layer line actuals information entry

Indexes

IF-MIBifIndex

Column	Syntax	OID
zxAdslAtucPrevSnrMgn The adslAtucCurrSnrMgn at the time of the last linkup event.	tenth dBInteger32 Constraints: `range: -640-640`	`.1.3.6.1.4.1.3902.1004.4.1.3.1.1`
zxAdslAtucPrevAtn The adslAtucCurrAtn at the time of the last linkup event.	tenth dBUnsigned32 Constraints: `range: 0-630`	`.1.3.6.1.4.1.3902.1004.4.1.3.1.2`
zxAdslAtucPrevAttainableRate The adslAtucCurrAttainableRate at the time of the last linkup event.	kbpsSNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.3902.1004.4.1.3.1.3`
zxAdslAtucChipVersion deprecated The atuc chip version number.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.3902.1004.4.1.3.1.4`

zxAdslAturPhysTable

table

.1.3.6.1.4.1.3902.1004.4.1.4 · 1 row entry · 3 columns

Open in standard view

This table provides one row for each ATUR
Each row contains the Physical Layer Parameters
table for that ATUR. ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94).

zxAdslAturPhysEntry entry .1.3.6.1.4.1.3902.1004.4.1.4.1

Adsl physical layer line actuals information entry

Indexes

IF-MIBifIndex

Column	Syntax	OID
zxAdslAturPrevSnrMgn The adslAturCurrSnrMgn at the time of the last linkup event.	tenth dBInteger32 Constraints: `range: -640-640`	`.1.3.6.1.4.1.3902.1004.4.1.4.1.1`
zxAdslAturPrevAtn The adslAturCurrAtn at the time of the last linkup event.	tenth dBUnsigned32 Constraints: `range: 0-630`	`.1.3.6.1.4.1.3902.1004.4.1.4.1.2`
zxAdslAturPrevAttainableRate The adslAturCurrAttainableRate at the time of the last linkup event.	kbpsSNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.3902.1004.4.1.4.1.3`

zxAdslAtucChanTable

table

.1.3.6.1.4.1.3902.1004.4.1.5 · 1 row entry · 3 columns

Open in standard view

This table provides one row for each Atuc channel.
ADSL channel interfaces are those ifEntries
where ifType is equal to adslInterleave(124)
or adslFast(125).

zxAdslAtucChanEntry entry .1.3.6.1.4.1.3902.1004.4.1.5.1

Adsl channel layer line actuals information entry

Indexes

IF-MIBifIndex

Column	Syntax	OID
zxAdslAtucChanRsSymbols The number of DMT symbols per ReedSolomon code word (S) in the upstream direction. Note that S is not restricted to interleaved mode only. This parameter is calculated differently for G.992.3 and G.992.5.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1004.4.1.5.1.1`
zxAdslAtucChanRsDepth This parameter indicates interleaving depth (D) in the upstream direction. Note that D is not restricted to interleaved mode only. Even in fast mode, D is a valid constant value and is equal to 1.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1004.4.1.5.1.2`
zxAdslAtucChanRsRedundancy The number of redundant bytes (R) per Reed-Solomon code in the upstream direction.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1004.4.1.5.1.3`

zxAdslAturChanTable

table

.1.3.6.1.4.1.3902.1004.4.1.6 · 1 row entry · 3 columns

Open in standard view

This table provides one row for each ATUR channel.
ADSL channel interfaces are those ifEntries
where ifType is equal to adslInterleave(124)
or adslFast(125).

zxAdslAturChanEntry entry .1.3.6.1.4.1.3902.1004.4.1.6.1

Adsl channel layer line actuals information entry

Indexes

IF-MIBifIndex

Column	Syntax	OID
zxAdslAturChanRsSymbols The number of DMT symbols per ReedSolomon code word (S) in the upstream direction. Note that S is not restricted to interleaved mode only. This parameter is calculated differently for G.992.3 and G.992.5.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1004.4.1.6.1.1`
zxAdslAturChanRsDepth This parameter indicates interleaving depth (D) in the upstream direction. Note that D is not restricted to interleaved mode only. Even in fast mode, D is a valid constant value and is equal to 1.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1004.4.1.6.1.2`
zxAdslAturChanRsRedundancy The number of redundant bytes (R) per Reed-Solomon code in the upstream direction.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1004.4.1.6.1.3`

zxAdslAtucChanPerfTable

table

.1.3.6.1.4.1.3902.1004.4.1.7 · 1 row entry · 12 columns

Open in standard view

This table provides one row for each Atuc channel.
ADSL channel interfaces are those ifEntries
where ifType is equal to adslInterleave(124)
or adslFast(125).

zxAdslAtucChanPerfEntry entry .1.3.6.1.4.1.3902.1004.4.1.7.1

DMT channel layer line actuals information entry

Indexes

IF-MIBifIndex

Column	Syntax	OID
zxAdslAtucChanPerfNcd Count of no cell delineation (ncd) on this channel.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.3902.1004.4.1.7.1.1`
zxAdslAtucChanPerfOcd Count of out of cell delineation (ocd) on this channel.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.3902.1004.4.1.7.1.2`
zxAdslAtucChanPerfHec Header error check counter (hec) on this channel.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.3902.1004.4.1.7.1.3`
zxAdslAtucChanPerfCurr15Ncd Count of no cell delineation (ncd) on this channel within the current 15 minute time interval.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.3902.1004.4.1.7.1.4`
zxAdslAtucChanPerfCurr15Ocd Count of out of cell delineation (ocd) on this channel within the current 15 minute time interval.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.3902.1004.4.1.7.1.5`
zxAdslAtucChanPerfCurr15Hec Header error check counter (hec) on this channel within the current 15 minute time interval.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.3902.1004.4.1.7.1.6`
zxAdslAtucChanPerfCurr1DayNcd Count of no cell delineation (ncd) on this channel within the current 1 day interval.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.3902.1004.4.1.7.1.7`
zxAdslAtucChanPerfCurr1DayOcd Count of out of cell delineation (ocd) on this channel within the current 1 day interval.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.3902.1004.4.1.7.1.8`
zxAdslAtucChanPerfCurr1DayHec Header error check counter (hec) on this channel within the current 1 day interval	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.3902.1004.4.1.7.1.9`
zxAdslAtucChanPerfPrev1DayNcd Count of no cell delineation (ncd) on this channel within the most recent previous 1-day period.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.3902.1004.4.1.7.1.10`
zxAdslAtucChanPerfPrev1DayOcd Count of out of cell delineation (ocd) on this channel within the most recent previous 1-day period.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.3902.1004.4.1.7.1.11`
zxAdslAtucChanPerfPrev1DayHec Header error check counter (hec) on this channel within the most recent previous 1-day period.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.3902.1004.4.1.7.1.12`

zxAdslAturChanPerfTable

table

.1.3.6.1.4.1.3902.1004.4.1.8 · 1 row entry · 8 columns

Open in standard view

This table provides one row for each Atur channel.
ADSL channel interfaces are those ifEntries
where ifType is equal to adslInterleave(124)
or adslFast(125).

zxAdslAturChanPerfEntry entry .1.3.6.1.4.1.3902.1004.4.1.8.1

DMT channel layer line actuals information entry

Indexes

IF-MIBifIndex

Column	Syntax	OID
zxAdslAturChanPerfNcd Count of no cell delineation (ncd) on this channel.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.3902.1004.4.1.8.1.1`
zxAdslAturChanPerfHec Header error check counter (hec) on this channel.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.3902.1004.4.1.8.1.2`
zxAdslAturChanPerfCurr15Ncd Count of no cell delineation (ncd) on this channel within the current 15 minute time interval.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.3902.1004.4.1.8.1.3`
zxAdslAturChanPerfCurr15Hec Header error check counter (hec) on this channel within the current 15 minute time interval	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.3902.1004.4.1.8.1.4`
zxAdslAturChanPerfCurr1DayNcd Count of no cell delineation (ncd) on this channel within the current 1 day interval.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.3902.1004.4.1.8.1.5`
zxAdslAturChanPerfCurr1DayHec Header error check counter (hec) on this channel within the current 1 day interval	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.3902.1004.4.1.8.1.6`
zxAdslAturChanPerfPrev1DayNcd Count of no cell delineation (ncd) on this channel within the most recent previous 1-day period.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.3902.1004.4.1.8.1.7`
zxAdslAturChanPerfPrev1DayHec Header error check counter (hec) on this channel within the most recent previous 1-day period.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.3902.1004.4.1.8.1.8`

zxDslLoopTestTable

table

.1.3.6.1.4.1.3902.1004.4.1.9 · 1 row entry · 14 columns

Open in standard view

This table provides one row for each DSL line tesing.

zxDslLoopTestEntry entry .1.3.6.1.4.1.3902.1004.4.1.9.1

DSL line tesing information entry

Indexes

zxDslLoopTestPort

Column Syntax OID

zxDslLoopTestPort

Dsl port number.It should be equal to ifIndex in DSL layer.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1004.4.1.9.1.1

zxDslLoopTestType

This is loop test action expected.

Enumerationr/w

Enumerated Values:

0	noOper
1	cancle
2	utopia
3	afe
4	hybrid
5	atuc_OAM
6	atur_OAM

.1.3.6.1.4.1.3902.1004.4.1.9.1.2

zxDslLoopTestOperStatus

This is loop test operational status.

Note: if zxDslLoopTestOperStatus equal to Excuting(1),
ifOperStaus should be tesing(3).

Enumeration

Enumerated Values:

0	neverExcute
1	excuting
2	excuted
3	faliedToCommit

.1.3.6.1.4.1.3902.1004.4.1.9.1.3

zxDslLoopTestConfParam1

Configuration param for some looptest.Its definition may be deferent
according to the zxDslLoopTestType value and device type.

For DSL8220v2.x:
zxDslLoopTestType zxDslLoopTestConfParam1
--…

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1004.4.1.9.1.5

zxDslLoopTestConfParam2

Configuration param for some looptest.Its definition may be deferent
according to the zxDslLoopTestType value and device type.
No looptest uses this param now.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1004.4.1.9.1.6

zxDslLoopTestConfParam3

Configuration param for some looptest.Its definition may be deferent
according to the zxDslLoopTestType value and device type.
No looptest uses this param now.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1004.4.1.9.1.7

zxDslLoopTestConfParam4

Configuration param for some looptest.Its definition may be deferent
according to the zxDslLoopTestType value and device type.
No looptest uses this param now.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1004.4.1.9.1.8

zxDslLoopTestConfParam5

Configuration param for some looptest.Its definition may be deferent
according to the zxDslLoopTestType value and device type.
No looptest uses this param now.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1004.4.1.9.1.9

zxDslLoopTestResultParam1

Loop test result param for some looptest.Its definition may be deferent
according to the zxDslLoopTestType value and device type.

For DSL8220v2.x:
zxDslLoopTestType zxDslLoopTestConfParam1
…

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1004.4.1.9.1.10

zxDslLoopTestResultParam2

Loop test result param for some looptest.Its definition may be deferent
according to the zxDslLoopTestType value and device type.
No looptest uses this param now.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1004.4.1.9.1.11

zxDslLoopTestResultParam3

Loop test result param for some looptest.Its definition may be deferent
according to the zxDslLoopTestType value and device type.
No looptest uses this param now.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1004.4.1.9.1.12

zxDslLoopTestResultParam4

Loop test result param for some looptest.Its definition may be deferent
according to the zxDslLoopTestType value and device type.
No looptest uses this param now.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1004.4.1.9.1.13

zxDslLoopTestResultParam5

Loop test result param for some looptest.Its definition may be deferent
according to the zxDslLoopTestType value and device type.
No looptest uses this param now.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1004.4.1.9.1.14

zxDslLoopTestRowStatus

Loop test table RowStatus .

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.3902.1004.4.1.9.1.15

zxAdslLineAlarmConfProfileExtTable

table

.1.3.6.1.4.1.3902.1004.4.1.20 · 1 row entry · 13 columns

Open in standard view

Adsl line alarm config profile extended information table.
The cycle of thresholds monitoring shoul be less than 5 minutes.

zxAdslLineAlarmConfProfileExtEntry entry .1.3.6.1.4.1.3902.1004.4.1.20.1

An entry extends the adslLineAlarmConfProfileEntry defined in
[RFC2662]. Each entry corresponds to an ADSL line alarm profile.

Indexes

No indexes recorded

Column	Syntax	OID
zxAdslAtucConnRateTolerance Tolerance between configured adslAtucChanConfInterleaveMaxTxRate and actual adslAtucChanCurrTxRate. Calculation: 100*(adslAtucChanConfInterleaveMaxTxRate - adslAtucChanCurrTxR…	%Integer32r/w Constraints: `range: 0-100`	`.1.3.6.1.4.1.3902.1004.4.1.20.1.1`
zxAdslAturConnRateTolerance Tolerance between configured adslAturChanConfInterleaveMaxTxRate and actual adslAturChanCurrTxRate. Calculation: 100*(adslAturChanConfInterleaveMaxTxRate - adslAturChanCurrTxR…	%Integer32r/w Constraints: `range: 0-100`	`.1.3.6.1.4.1.3902.1004.4.1.20.1.2`
zxAdslThreshAtucConnRate Threshold of Atuc connection rate. If adslAtucChanCurrTxRate is lower than zxAdslThreshAtucConnRate, zxAdslAtucConnRateOverThreshTrap trap will be sent. A value of `0' will disable the trap.	kbpsInteger32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1004.4.1.20.1.3`
zxAdslThreshAturConnRate Threshold of Atur connection rate. If adslAturChanCurrTxRate is lower than zxAdslThreshAturConnRate, zxAdslAturConnRateOverThreshTrap trap will be sent. A value of `0' will disable the trap.	kbpsInteger32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1004.4.1.20.1.4`
zxAdslThreshAtucBandwidthUtil Threshold of Atuc bandwidth utilization. Calculation: Delta(ifOutOctets)81024*100 Atuc Utilization = ------------------------------------------------…	%Integer32r/w Constraints: `range: 0-100`	`.1.3.6.1.4.1.3902.1004.4.1.20.1.5`
zxAdslThreshAturBandwidthUtil Threshold of Atur bandwidth utilization. Calculation: Delta(ifInOctets)81024*100 Atur Utilization = -------------------------------------------------…	%Integer32r/w Constraints: `range: 0-100`	`.1.3.6.1.4.1.3902.1004.4.1.20.1.6`
zxAdslThreshAtucPacketLossRate The percentage of lost packets to total packets received on the Atuc interface. Calculation: ifOutDiscards*100 Atuc PacketLossRate = ------------------------------…	%Integer32r/w Constraints: `range: 0-100`	`.1.3.6.1.4.1.3902.1004.4.1.20.1.7`
zxAdslThreshAturPacketLossRate The percentage of lost packets to total packets received on the Atur interface. Calculation: ifInDiscards*100 Atur PacketLossRate = ------------------------------…	%Integer32r/w Constraints: `range: 0-100`	`.1.3.6.1.4.1.3902.1004.4.1.20.1.8`
zxAdslThreshAtucBlockErrorRate The percentage of adslAtucChanUncorrectBlks to adslAtucChanReceivedBlks on the Atuc interface. If this threshold is across, zxAdslAtucBlockErrorRateOverThreshTrap trap will be sent. A value of `0' will disable the t…	%Integer32r/w Constraints: `range: 0-100`	`.1.3.6.1.4.1.3902.1004.4.1.20.1.9`
zxAdslThreshAturBlockErrorRate The percentage of adslAturChanUncorrectBlks to adslAturChanReceivedBlks on the Atur interface. If this threshold is across, zxAdslAturBlockErrorRateOverThreshTrap trap will be sent. A value of `0' will disable the t…	%Integer32r/w Constraints: `range: 0-100`	`.1.3.6.1.4.1.3902.1004.4.1.20.1.10`
zxAdslThreshReservedMetric1 reserved threshold. A value of `0' will disable the trap.	Integer32r/w Constraints: `range: 0-100`	`.1.3.6.1.4.1.3902.1004.4.1.20.1.11`
zxAdslThreshReservedMetric2 reserved threshold. A value of `0' will disable the trap.	Integer32r/w Constraints: `range: 0-100`	`.1.3.6.1.4.1.3902.1004.4.1.20.1.12`
zxAdslThreshReservedMetric3 reserved threshold. A value of `0' will disable the trap.	Integer32r/w Constraints: `range: 0-100`	`.1.3.6.1.4.1.3902.1004.4.1.20.1.13`