ZTE-AN-ADSL-LINE-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
14
Rows
14
Columns
88
zxAnAdslLineTable
table.1.3.6.1.4.1.3902.1015.1000.1.1
·
1 row entry
·
5 columns
Adsl line additional information table.
Adsl line additional information entry
Indexes
IF-MIBifIndex
| Column | Syntax | OID |
|---|---|---|
|
zxAnAdslLineTxDataRate
Transmitted net data rate on this line.
|
kbpsSNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.1000.1.1.1.1 |
|
zxAnAdslLineRxDataRate
Recieved net data rate on this line.
|
kbpsSNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.1000.1.1.1.2 |
|
zxAnAdslAtucActInp
Actual impulse noise protection.
This parameter reports the actual impulse noise protection (INP) on the channel in the L0 state. In the L1 or L2 state, the parameter contains the INP in the previous L0 state. |
0.1 symbolsInteger32 Constraints: range: 0-255 |
.1.3.6.1.4.1.3902.1015.1000.1.1.1.3 |
|
zxAnAdslAturActInp
Actual impulse noise protection.
This parameter reports the actual impulse noise protection (INP) on the channel in the L0 state. In the L1 or L2 state, the parameter contains the INP in the previous L0 state. |
0.1 symbolsInteger32 Constraints: range: 0-255 |
.1.3.6.1.4.1.3902.1015.1000.1.1.1.4 |
|
zxAnAdslLineExtConfPrf
The value of this object identifies the row in the XDSL2
Line Ext Profile Table, (zxAnXdsl2LnExtConfPrfTable), which applies for this line. |
OctetStringr/w Constraints: range: 1-32 |
.1.3.6.1.4.1.3902.1015.1000.1.1.1.5 |
.1.3.6.1.4.1.3902.1015.1000.1.2
·
1 row entry
·
19 columns
Adsl line config profile extended information table.
An entry extends the adslLineConfProfileEntry defined in
[RFC2662]. Each entry corresponds to an ADSL line profile.
[RFC2662]. Each entry corresponds to an ADSL line profile.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
zxAnAdslLineConfTxStartBin
Specifies lowest bin number allowed for Tx signal.
Different line coding type has different default value. 0x20 (default for Annex A only) 0x20 (default for ADSL2/ADSL2plus) 0x06 (default for Annex A if G.Span … |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.1000.1.2.1.1 |
||||||||||||||||||
|
zxAnAdslLineConfTxEndBin
Specifies highest bin number allowed for Tx signal.
Default = 0x3ff (default for all Annexes and ADSL2/ADSL2plus) |
Integer32r/w Constraints: range: 0-512 |
.1.3.6.1.4.1.3902.1015.1000.1.2.1.2 |
||||||||||||||||||
|
zxAnAdslLineConfRxStartBin
Specifies lowest bin number allowed for Rx signal.
Different line coding type has different default value. 0x06 (default for Annex A) 0x01 (default for Annex B) 0x06 (default for Annex C/C.x) 0x06 (default f… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.1000.1.2.1.3 |
||||||||||||||||||
|
zxAnAdslLineConfRxEndBin
Specifies highest bin number allowed for Rx signal.
Default = 0x3f (default for all Annexes and ADSL2/ADLS2plus) |
Integer32r/w Constraints: range: 0-512 |
.1.3.6.1.4.1.3902.1015.1000.1.2.1.4 |
||||||||||||||||||
|
zxAnAdslLineConfUseCustomBins
Enable or disable custom bin selection for upstream/downstream
transmission. This parameter is used in conjunction with the adslAtucDMTConfFreqBins and adslAturDMTConfFreqBins[ADSL-DMT-LINE-MIB] parameter. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.1000.1.2.1.5 |
||||||||||||||||||
|
zxAnAdslAtucConfPsdMaskType
It is supported by G.Span. Dsl card team will provide files
about it in details. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.1000.1.2.1.6 |
||||||||||||||||||
|
zxAnAdslLineConfPMMode
This configuration parameter defines the line states the ATU-C
may autonomously transition to on this line. It is coded in a bit map representation (0 if not allowed, 1 if allowed) with following definition: Bit 0… |
Bitsr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.1000.1.2.1.7 |
||||||||||||||||||
|
zxAnAdslLineConfPML2Rate
PM configuration parameter,related to the L2 low power state.
This parameter specifies the minimum net data rate during the low power state (L2). |
kbpsInteger32r/w Constraints: range: 256-1024 |
.1.3.6.1.4.1.3902.1015.1000.1.2.1.8 |
||||||||||||||||||
|
zxAnAdsl2ConfMinProtectionDs
Minimum Impulse Noise Protection on Downstream direction. The
minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can take the following values: noProtection (i.e., INP not req… |
symbolsEnumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.1000.1.2.1.9 |
||||||||||||||||||
|
zxAnAdslLineConfMinProtectionUs
Minimum Impulse Noise Protection on Upstream direction. The
minimum impulse noise protection for the bearer channel, expressed in symbols. |
symbolsEnumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.1000.1.2.1.10 |
||||||||||||||||||
|
zxAnAdslConfDMTConfTrellis
Parameter that enable or disable trellis coding. Trellis coding
should always be enabled for its clear performance advantage. Trellis coding is mandatory for ADSL/ADSL2plus. The value enable(1) is default for all Annex… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.1000.1.2.1.11 |
||||||||||||||||||
|
zxAnAdslAtucConfMaxBitsPerBin
Specifies maximum Rx number of bits per bin.
|
Integer32r/w Constraints: range: 0-15 |
.1.3.6.1.4.1.3902.1015.1000.1.2.1.12 |
||||||||||||||||||
|
zxAnAdslAtucConfBitSwapDs
enables/disables downstream bit swapping.
Different line coding type has different default value. disable(2) (default for ADSL2/ADLS2plus, Annex B, Annex C C.x, G.Span/ADSL+ and G.Span Plus) en… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.1000.1.2.1.13 |
||||||||||||||||||
|
zxAnAdslAtucConfBitSwapUs
enables/disables upstream bit swapping.
Different line coding type has different default value. disable(2) (default for ADSL2/ADLS2plus, Annex B, Annex C C.x, G.Span/ADSL+ and G.Span Plus) enab… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.1000.1.2.1.14 |
||||||||||||||||||
|
zxAnAdslAtucConfReAdsl2Enable
Defines whether downstream READSL2 operation should be forced
by the ATU-C. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.1000.1.2.1.15 |
||||||||||||||||||
|
zxAnAdslAtucConfPmL0Time
PM configuration parameter,related to the L2 low power state.
This parameter represents the minimum time between an exit from the L2 state and the next entry into the L2 state. |
secondsInteger32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.3902.1015.1000.1.2.1.16 |
||||||||||||||||||
|
zxAnAdslAtucConfPmL2Time
PM configuration parameter,related to the L2 low power state.
This parameter represents the minimum time between an entry into the L2 state and the first Power Trim in the L2 state and between two consecutive Power Tri… |
secondsInteger32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.3902.1015.1000.1.2.1.17 |
||||||||||||||||||
|
zxAnAdslAtucConfPmL2Atpr
PM configuration parameter,related to the L2 low power state.
This parameter represents the Maximum Aggregate Transmit Power Reduction (in dB) that can be performed through a single Power Trim in the L2 state. It range… |
dBInteger32r/w Constraints: range: 0-31 |
.1.3.6.1.4.1.3902.1015.1000.1.2.1.18 |
||||||||||||||||||
|
zxAdsl2ConfPsdMaskSelectUs
The selected upstream PSD mask. This parameter is used only
for annexes J and M of G.992.3 and G.992.5, and the same selection is used for all relevant enabled bits in adslLineTransAtucConfig of ADSL-LINE-EXT-MIB. … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.1000.1.2.1.19 |
zxAnAdslAtucChanTable
table.1.3.6.1.4.1.3902.1015.1000.1.3
·
1 row entry
·
4 columns
This table provides one row for each Atuc channel.
Adsl channel layer line actuals information entry
Indexes
IF-MIBifIndex
| Column | Syntax | OID |
|---|---|---|
|
zxAnAdslAtucChanInpEtr
GINP configuration parameters of downstream.
The expected throughput (ETR). |
kbpsUnsigned32 Constraints: range: 0-52000 |
.1.3.6.1.4.1.3902.1015.1000.1.3.1.1 |
|
zxAnAdslAtucChanInpEftr
GINP configuration parameters of downstream.
The error-free throughput (EFTR is defined as the average bit-rate at the alpha1/beta1 reference point, of bits originating from DTU's which have been detected to contain n… |
kbpsUnsigned32 Constraints: range: 0-52000 |
.1.3.6.1.4.1.3902.1015.1000.1.3.1.2 |
|
zxAnAdslAtucChanInpMinEftr
GINP configuration parameters of downstream.
The minimum error-free throughput (EFTR_min is defined as the minimum of the EFTR observed since the last reading of the EFTR_min. |
kbpsUnsigned32 Constraints: range: 0-52000 |
.1.3.6.1.4.1.3902.1015.1000.1.3.1.3 |
|
zxAnAdslAtucChanInpActDelay
GINP configuration parameters of downstream.
If retransmission is used in a given transmit direction, this Object is defined as the actual value of the time-independent component of the delay between the alfa1 and bet… |
msInteger32 Constraints: range: 0-63 |
.1.3.6.1.4.1.3902.1015.1000.1.3.1.4 |
zxAnAdslAturChanTable
table.1.3.6.1.4.1.3902.1015.1000.1.4
·
1 row entry
·
4 columns
This table provides one row for each ATUR channel.
Adsl channel layer line actuals information entry
Indexes
IF-MIBifIndex
| Column | Syntax | OID |
|---|---|---|
|
zxAnAdslAturChanInpEtr
GINP configuration parameters of upstream.
The expected throughput (ETR). |
kbpsUnsigned32 Constraints: range: 0-52000 |
.1.3.6.1.4.1.3902.1015.1000.1.4.1.1 |
|
zxAnAdslAturChanInpEftr
GINP configuration parameters of upstream..
The error-free throughput (EFTR is defined as the average bit-rate at the alpha1/beta1 reference point, of bits originating from DTU's which have been detected to contain no… |
kbpsUnsigned32 Constraints: range: 0-52000 |
.1.3.6.1.4.1.3902.1015.1000.1.4.1.2 |
|
zxAnAdslAturChanInpMinEftr
GINP configuration parameters of upstream.
The minimum error-free throughput (EFTR_min is defined as the minimum of the EFTR observed since the last reading of the EFTR_min. |
kbpsUnsigned32 Constraints: range: 0-52000 |
.1.3.6.1.4.1.3902.1015.1000.1.4.1.3 |
|
zxAnAdslAturChanInpActDelay
GINP configuration parameters of upstream.
If retransmission is used in a given transmit direction, this Object is defined as the actual value of the time-independent component of the delay between the alfa1 and beta1… |
msInteger32 Constraints: range: 0-63 |
.1.3.6.1.4.1.3902.1015.1000.1.4.1.4 |
.1.3.6.1.4.1.3902.1015.1000.1.20
·
1 row entry
·
11 columns
Adsl line alarm config profile extended information table. The cycle of thresholds monitoring shoul be less than 5 minutes.
An entry extends the adslLineAlarmConfProfileEntry defined in
[RFC2662]. Each entry corresponds to an ADSL line alarm profile.
[RFC2662]. Each entry corresponds to an ADSL line alarm profile.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
zxAnAdslAtucConnRateTolerance
Tolerance between configured adslAtucChanConfInterleaveMaxTxRate and
actual adslAtucChanCurrTxRate. Calculation: 100*(adslAtucChanConfInterleaveMaxTxRate - adslAtucChanCurrTxR… |
%Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.3902.1015.1000.1.20.1.1 |
||||||||||||
|
zxAnAdslAturConnRateTolerance
Tolerance between configured adslAturChanConfInterleaveMaxTxRate and
actual adslAturChanCurrTxRate. Calculation: 100*(adslAturChanConfInterleaveMaxTxRate - adslAturChanCurrTxR… |
%Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.3902.1015.1000.1.20.1.2 |
||||||||||||
|
zxAnAdslAtucThreshConnRate
Threshold of Atuc connection rate.
If adslAtucChanCurrTxRate is lower than zxAnAdslAtucThreshConnRate, zxAnAdslAtucLowConnRateTrap trap will be sent. A value of `0' will disable the trap. |
kbpsSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.1000.1.20.1.3 |
||||||||||||
|
zxAnAdslAturThreshConnRate
Threshold of Atur connection rate.
If adslAturChanCurrTxRate is lower than zxAnAdslAturThreshConnRate, zxAnAdslAturLowConnRateTrap trap will be sent. A value of `0' will disable the trap. |
kbpsSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.1000.1.20.1.4 |
||||||||||||
|
zxAnAdslMaxAtucConnRateTolerance
Tolerance between configured adslAtucChanConfInterleaveMaxTxRate and
actual adslAtucChanCurrTxRate. Calculation: 100*(adslAtucChanCurrTxRate - adslAtucChanConfInterleaveMaxTxR… |
%Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.3902.1015.1000.1.20.1.5 |
||||||||||||
|
zxAnAdslMaxAturConnRateTolerance
Tolerance between configured adslAturChanConfInterleaveMaxTxRate and
actual adslAturChanCurrTxRate. Calculation: 100*(adslAturChanCurrTxRate - adslAturChanConfInterleaveMaxTxR… |
%Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.3902.1015.1000.1.20.1.6 |
||||||||||||
|
zxAnAdslMaxThreshAtucConnRate
Threshold of Atuc connection rate.
If adslAtucChanCurrTxRate is higher than zxAnAdslMaxThreshAtucConnRate, zxAnAdslAtucHighConnRateTrap trap will be sent. A value of `0' will disable the trap. |
kbpsSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.1000.1.20.1.7 |
||||||||||||
|
zxAnAdslMaxThreshAturConnRate
Threshold of Atur connection rate.
If adslAturChanCurrTxRate is higher than zxAnAdslMaxThreshAturConnRate, zxAnAdslAturHighConnRateTrap trap will be sent. A value of `0' will disable the trap. |
kbpsSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.1000.1.20.1.8 |
||||||||||||
|
zxAnAdslAturInitFailTrapEnable
Enables and disables the InitFailureTrap on the atur interface.
unused1 (0) - This bit is no use to enable or disable the the InitFailureTrap … |
Bitsr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.1000.1.20.1.9 |
||||||||||||
|
zxAnAdslThreshAtucInpLeftr
GINP configuration parameters of downstream.
The fraction of NDR that shall be used as the threshold for leftr defects. lefter (The low error-free throughput rate) defect is defined as: A leftr defect occuurs when EF… |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.3902.1015.1000.1.20.1.10 |
||||||||||||
|
zxAnAdslThreshAturInpLeftr
GINP configuration parameters of upstream.
The fraction of NDR that shall be used as the threshold for leftr defects. lefter (The low error-free throughput rate) defect is defined as: A leftr defect occuurs when EFTR… |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.3902.1015.1000.1.20.1.11 |
.1.3.6.1.4.1.3902.1015.1000.1.21
·
1 row entry
·
4 columns
This table provides atuc performance.
the entry for atuc channel performance.
Indexes
IF-MIBifIndex
| Column | Syntax | OID |
|---|---|---|
|
zxAnAdslAtucPerfDataFecs
Count of seconds during this interval that there was at
least one FEC correction event on this channel. |
secondsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.1000.1.21.1.1 |
|
zxAnAdslAtucPerfDataCurr15Fecs
Count of seconds during this interval that there was at
least one FEC correction event on this channel in this line within the current 15 minute time interval. |
secondsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.1000.1.21.1.2 |
|
zxAnAdslAtucPerfDataCurr1DayFecs
Count of seconds during this interval that there was at
least one FEC correction event on this channel in this line within the current 1 day interval. |
secondsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.1000.1.21.1.3 |
|
zxAnAdslAtucPerfDataPrev1DayFecs
Count of seconds during this interval that there was at
least one FEC correction event on this channel in this line within the most recent previous 1-day period. |
secondsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.1000.1.21.1.4 |
.1.3.6.1.4.1.3902.1015.1000.1.22
·
1 row entry
·
4 columns
This table provides atur performance.
the entry for atur performance.
Indexes
IF-MIBifIndex
| Column | Syntax | OID |
|---|---|---|
|
zxAnAdslAturPerfDataFecs
Count of seconds during this interval that there was at
least one FEC correction event on this channel. |
secondsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.1000.1.22.1.1 |
|
zxAnAdslAturPerfDataCurr15Fecs
Count of seconds during this interval that there was at
least one FEC correction event on this channel in this line within the current 15 minute time interval. |
secondsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.1000.1.22.1.2 |
|
zxAnAdslAturPerfDataCurr1DayFecs
Count of seconds during this interval that there was at
least one FEC correction event on this channel in this line within the current 1 day interval. |
secondsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.1000.1.22.1.3 |
|
zxAnAdslAturPerfDataPrev1DayFecs
Count of seconds during this interval that there was at
least one FEC correction event on this channel in this line within the most recent previous 1-day period. |
secondsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.1000.1.22.1.4 |
.1.3.6.1.4.1.3902.1015.1000.1.23
·
1 row entry
·
6 columns
This table provides atuc channel performance.
the entry for atuc channel performance.
Indexes
IF-MIBifIndex
| Column | Syntax | OID |
|---|---|---|
|
zxAnAtucChanPerfCurr15RtxDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU has been retransmitted by the transmitter in the current 15 minute interval. Multiple retransmission of the same DTU is counted as m… |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.1000.1.23.1.1 |
|
zxAnAtucChanPerfCurr15RtxCDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU has been detected in error and has been successfully corrected by a retransmission in the current 15 minute interval |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.1000.1.23.1.2 |
|
zxAnAtucChanPerfCurr15RtxUcDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU is detected in error and has not been corrected by a retransmission in the current 15 minute interval. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.1000.1.23.1.3 |
|
zxAnAtucChanPerfCurr1DRtxDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU has been retransmitted by the transmitter in the current day interval. Multiple retransmission of the same DTU is counted as many ti… |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.1000.1.23.1.4 |
|
zxAnAtucChanPerfCurr1DRtxCDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU has been detected in error and has been successfully corrected by a retransmission in the current day interval |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.1000.1.23.1.5 |
|
zxAnAtucChanPerfCurr1DRtxUcDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU is detected in error and has not been corrected by a retransmission. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.1000.1.23.1.6 |
.1.3.6.1.4.1.3902.1015.1000.1.24
·
1 row entry
·
6 columns
This table provides atur channel performance.
the entry for atur channel performance.
Indexes
IF-MIBifIndex
| Column | Syntax | OID |
|---|---|---|
|
zxAnAturChanPerfCurr15RtxDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU has been retransmitted by the transmitter in the current 15 minute interval. Multiple retransmission of the same DTU is counted as m… |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.1000.1.24.1.1 |
|
zxAnAturChanPerfCurr15RtxCDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU has been detected in error and has been successfully corrected by a retransmission in the current 15 minute interval |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.1000.1.24.1.2 |
|
zxAnAturChanPerfCurr15RtxUcDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU is detected in error and has not been corrected by a retransmission in the current 15 minute interval. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.1000.1.24.1.3 |
|
zxAnAturChanPerfCurr1DRtxDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU has been retransmitted by the transmitter in the current day interval. Multiple retransmission of the same DTU is counted as many ti… |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.1000.1.24.1.4 |
|
zxAnAturChanPerfCurr1DRtxCDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU has been detected in error and has been successfully corrected by a retransmission in the current day interval |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.1000.1.24.1.5 |
|
zxAnAturChanPerfCurr1DRtxUcDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU is detected in error and has not been corrected by a retransmission. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.1000.1.24.1.6 |
.1.3.6.1.4.1.3902.1015.1000.1.25
·
1 row entry
·
3 columns
The table zxAnAdslAtucChanIntervalTable contains history Performance Monitoring results for 15min of DSL channel.
The table zxAnAdslAtucChanIntervalTable contains history
Performance Monitoring results for 15min of DSL channel.
Performance Monitoring results for 15min of DSL channel.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
zxAnAdslAtucChanIntervalRtxDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU has been retransmitted by the transmitter during this interval. Multiple retransmission of the same DTU is counted as many times as i… |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.1000.1.25.1.1 |
|
zxAnAdslAtucChanIntervalRtxCDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU has been detected in error and has been successfully corrected by a retransmission during this interval. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.1000.1.25.1.2 |
|
zxAnAdslAtucChanIntervalRtxUcDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU is detected in error and has not been corrected by a retransmission. during this interval. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.1000.1.25.1.3 |
.1.3.6.1.4.1.3902.1015.1000.1.26
·
1 row entry
·
3 columns
The table zxAnAdslAturChanIntervalTable contains history Performance Monitoring results for 15min of DSL channel.
The table zxAnAdslAturChanIntervalTable contains history
Performance Monitoring results for 15min of DSL channel.
Performance Monitoring results for 15min of DSL channel.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
zxAnAdslAturChanIntervalRtxDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU has been retransmitted by the transmitter during this interval. Multiple retransmission of the same DTU is counted as many times as i… |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.1000.1.26.1.1 |
|
zxAnAdslAturChanIntervalRtxCDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU has been detected in error and has been successfully corrected by a retransmission during this interval. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.1000.1.26.1.2 |
|
zxAnAdslAturChanIntervalRtxUcDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU is detected in error and has not been corrected by a retransmission. during this interval. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.1000.1.26.1.3 |
.1.3.6.1.4.1.3902.1015.1000.1.27
·
1 row entry
·
4 columns
The table zxAnAdslAtucChanHist1DayTable contains channel history for 1 day intervals of DSL.
The table zxAnAdslAtucChanHist1DayTable contains PM channel
history for 1 day intervals of DSL.
The indexes of this table is an interface index where
the interface has an ifType value which is applicable
for a DSL chan…
history for 1 day intervals of DSL.
The indexes of this table is an interface index where
the interface has an ifType value which is applicable
for a DSL chan…
Indexes
IF-MIBifIndex zxAnAdslAtucChanHist1DayNumber
| Column | Syntax | OID |
|---|---|---|
|
zxAnAdslAtucChanHist1DayNumber
The interval number.
|
Integer32 Constraints: range: 1-30 |
.1.3.6.1.4.1.3902.1015.1000.1.27.1.1 |
|
zxAnAdslAtucChanHist1DayRtxDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU has been retransmitted by the transmitter during this interval. Multiple retransmission of the same DTU is counted as many times as … |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.1000.1.27.1.2 |
|
zxAnAdslAtucChanHist1DayRtxCDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU has been detected in error and has been successfully corrected by a retransmission during this interval. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.1000.1.27.1.3 |
|
zxAnAdslAtucChanHist1DayRtxUcDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU is detected in error and has not been corrected by a retransmission during this interval. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.1000.1.27.1.4 |
.1.3.6.1.4.1.3902.1015.1000.1.28
·
1 row entry
·
4 columns
The table zxAnAdslAturChanHist1DayTable contains channel history for 1 day intervals of DSL.
The table zxAnAdslAturChanHist1DayTable contains PM channel
history for 1 day intervals of DSL.
The indexes of this table is an interface index where
the interface has an ifType value which is applicable
for a DSL chan…
history for 1 day intervals of DSL.
The indexes of this table is an interface index where
the interface has an ifType value which is applicable
for a DSL chan…
Indexes
IF-MIBifIndex zxAnAdslAturChanHist1DayNumber
| Column | Syntax | OID |
|---|---|---|
|
zxAnAdslAturChanHist1DayNumber
The interval number.
|
Integer32 Constraints: range: 1-30 |
.1.3.6.1.4.1.3902.1015.1000.1.28.1.1 |
|
zxAnAdslAturChanHist1DayRtxDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU has been retransmitted by the transmitter during this interval. Multiple retransmission of the same DTU is counted as many times as i… |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.1000.1.28.1.2 |
|
zxAnAdslAturChanHist1DayRtxCDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU has been detected in error and has been successfully corrected by a retransmission during this interval. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.1000.1.28.1.3 |
|
zxAnAdslAturChanHist1DayRtxUcDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU is detected in error and has not been corrected by a retransmission during this interval. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.1000.1.28.1.4 |
zxAnDslLoopBackTestTable
table.1.3.6.1.4.1.3902.1015.1000.1.30
·
1 row entry
·
11 columns
This table provides one row for each DSL line loopback test.
DSL line loopback test information entry
Indexes
zxAnDslLoopBackTestRack zxAnDslLoopBackTestShelf zxAnDslLoopBackTestSlot zxAnDslLoopBackTestPort zxAnDslLoopBackTestBridgePort
| Column | Syntax | OID | ||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
zxAnDslLoopBackTestRack
Rack number of the dsl port.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.1000.1.30.1.1 |
||||||||||||||||||||||||||||
|
zxAnDslLoopBackTestShelf
Shelf number of the dsl port.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.1000.1.30.1.2 |
||||||||||||||||||||||||||||
|
zxAnDslLoopBackTestSlot
Slot number of the dsl port.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.1000.1.30.1.3 |
||||||||||||||||||||||||||||
|
zxAnDslLoopBackTestPort
The dsl port number.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.1000.1.30.1.4 |
||||||||||||||||||||||||||||
|
zxAnDslLoopBackTestBridgePort
Dsl bridge port index. eg.It is PVC ID in ADSL port.
If the test is only in the physical port,then this fileds will be 0 |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.1000.1.30.1.5 |
||||||||||||||||||||||||||||
|
zxAnDslLoopBackTestType
This is loop test action expected.
NOTES: |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.1000.1.30.1.6 |
||||||||||||||||||||||||||||
|
zxAnDslLoopBackTestOperStatus
This is loop test operational status.
Note: if zxAnDslLoopBackTestOperStatus equal to Excuting(1), ifOperStaus should be loopback test(3). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.1000.1.30.1.7 |
||||||||||||||||||||||||||||
|
zxAnDslLoopBackTestResult
This is loop test result and includes reasons for test failures.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.1000.1.30.1.8 |
||||||||||||||||||||||||||||
|
zxAnDslLoopBackTestConfSendCells
The count of cells will be sent in the loopback test.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.1000.1.30.1.9 |
||||||||||||||||||||||||||||
|
zxAnDslLoopBackTestResultRecivedCells
The count of recived cells in the loopback test.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.1000.1.30.1.10 |
||||||||||||||||||||||||||||
|
zxAnDslLoopBackTestRowStatus
Loop test table RowStatus .
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.1000.1.30.1.15 |