zxAnAdslThreshAtucInpLeftr
ZTE-AN-ADSL-LINE-MIB ·
.1.3.6.1.4.1.3902.1015.1000.1.20.1.10
Object
column
r/w
Integer32
GINP configuration parameters of downstream. The fraction of NDR that shall be used as the threshold for leftr defects. lefter (The low error-free throughput rate) defect is defined as: A leftr defect occuurs when EFTR < EFTR_THRESH * NDR A leftr defect terminates when EFTR >= EFTR_THRESH * NDR When EFTR_THRESH is set to the special value of 0, ETR shall be used as the threshold in above inequalities: A leftr defect occurs when EFTR < ETR A leftr defect terminates when EFTR >=ETR. Valid values are from 0 to 100 in increments of 0.01.
Context
- MIB
- ZTE-AN-ADSL-LINE-MIB
- OID
.1.3.6.1.4.1.3902.1015.1000.1.20.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zxAnAdslLineAlarmConfProfileExtEntry
- Table
- zxAnAdslLineAlarmConfProfileExtTable
- Siblings
- 10
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-100
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnAdslAtucConnRateTolerance Tolerance between configured adslAtucChanConfInterleaveMaxTxRate and
actual adslAtucChanCurrTxRate.
Calculation:
100*(adslAtucChanConfI… | column | % Integer32 | .1.3.6.1.4.1.3902.1015.1000.1.20.1.1 |
| zxAnAdslThreshAturInpLeftr GINP configuration parameters of upstream.
The fraction of NDR that shall be used as the threshold for
leftr defects.
lefter (The low error-free throughput rate) defect is define… | column | Integer32 | .1.3.6.1.4.1.3902.1015.1000.1.20.1.11 |
| zxAnAdslAturConnRateTolerance Tolerance between configured adslAturChanConfInterleaveMaxTxRate and
actual adslAturChanCurrTxRate.
Calculation:
100*(adslAturChanConfI… | column | % Integer32 | .1.3.6.1.4.1.3902.1015.1000.1.20.1.2 |
| zxAnAdslAtucThreshConnRate Threshold of Atuc connection rate.
If adslAtucChanCurrTxRate is lower than zxAnAdslAtucThreshConnRate,
zxAnAdslAtucLowConnRateTrap trap will be sent.
A value of `0' will disabl… | column | kbps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.1000.1.20.1.3 |
| zxAnAdslAturThreshConnRate Threshold of Atur connection rate.
If adslAturChanCurrTxRate is lower than zxAnAdslAturThreshConnRate,
zxAnAdslAturLowConnRateTrap trap will be sent.
A value of `0' will disabl… | column | kbps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.1000.1.20.1.4 |
| zxAnAdslMaxAtucConnRateTolerance Tolerance between configured adslAtucChanConfInterleaveMaxTxRate and
actual adslAtucChanCurrTxRate.
Calculation:
100*(adslAtucChanCurrT… | column | % Integer32 | .1.3.6.1.4.1.3902.1015.1000.1.20.1.5 |
| zxAnAdslMaxAturConnRateTolerance Tolerance between configured adslAturChanConfInterleaveMaxTxRate and
actual adslAturChanCurrTxRate.
Calculation:
100*(adslAturChanCurrT… | column | % Integer32 | .1.3.6.1.4.1.3902.1015.1000.1.20.1.6 |
| zxAnAdslMaxThreshAtucConnRate Threshold of Atuc connection rate.
If adslAtucChanCurrTxRate is higher than zxAnAdslMaxThreshAtucConnRate,
zxAnAdslAtucHighConnRateTrap trap will be sent.
A value of `0' will d… | column | kbps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.1000.1.20.1.7 |
| zxAnAdslMaxThreshAturConnRate Threshold of Atur connection rate.
If adslAturChanCurrTxRate is higher than zxAnAdslMaxThreshAturConnRate,
zxAnAdslAturHighConnRateTrap trap will be sent.
A value of `0' will d… | column | kbps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.1000.1.20.1.8 |
| zxAnAdslAturInitFailTrapEnable Enables and disables the InitFailureTrap on the atur interface.
unused1 (0) - This bit is no use to enable or
disable the the … | column | Bits | .1.3.6.1.4.1.3902.1015.1000.1.20.1.9 |