V2H124-24-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

237

v2h124switchInfoTable

table

.1.3.6.1.4.1.52.4.12.30.1.1.3 · 1 row entry · 13 columns

Open in standard view

Table of descriptive and status information about
the switch units in this system.

v2h124switchInfoEntry entry .1.3.6.1.4.1.52.4.12.30.1.1.3.1

Table providing descriptions and status information for
switch units.

Indexes

v2h124swUnitIndex

Column Syntax OID

v2h124swUnitIndex

This object identifies the switch within the system
for which this entry contains information. This
value can never be greater than switchNumber.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.12.30.1.1.3.1.1

v2h124swHardwareVer

Hardware version of the main board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.52.4.12.30.1.1.3.1.2

v2h124swMicrocodeVer

Microcode version of the main board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.52.4.12.30.1.1.3.1.3

v2h124swLoaderVer

Loader version of the main board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.52.4.12.30.1.1.3.1.4

v2h124swBootRomVer

Boot ROM code version of the main board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.52.4.12.30.1.1.3.1.5

v2h124swOpCodeVer

Operation code version of the main board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.52.4.12.30.1.1.3.1.6

v2h124swPortNumber

The number of ports of this switch.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.12.30.1.1.3.1.7

v2h124swPowerStatus

Indicates the switch using internalPower(1),
redundantPower(2) or both(3)

Enumeration

Enumerated Values:

1	internalPower
2	redundantPower
3	internalAndRedundantPower

.1.3.6.1.4.1.52.4.12.30.1.1.3.1.8

v2h124swRoleInSystem

Indicates the switch is master(1), backupMaster(2)
or slave(3) in this system.

Enumeration

Enumerated Values:

1	master
2	backupMaster
3	slave

.1.3.6.1.4.1.52.4.12.30.1.1.3.1.9

v2h124swSerialNumber

Serial number of the switch.

OctetString

Constraints:
range: 0-80

.1.3.6.1.4.1.52.4.12.30.1.1.3.1.10

v2h124swExpansionSlot1

Type of expansion module in this switch slot 1.

Enumeration

Enumerated Values:

1	notPresent
2	other
3	hundredBaseFxScMmf
4	hundredBaseFxScSmf
5	hundredBaseFxMtrjMmf
6	thousandBaseSxScMmf
7	thousandBaseSxMtrjMmf
8	thousandBaseXGbic
9	thousandBaseLxScSmf
10	thousandBaseT
11	stackingModule
12	thousandBaseSfp
13	tenHundredBaseT4port
14	tenHundredBaseFxMtrj4port
15	comboStackingSfp
16	tenHundredBaseT

.1.3.6.1.4.1.52.4.12.30.1.1.3.1.11

v2h124swExpansionSlot2

Type of expansion module in this switch slot 2.

Enumeration

Enumerated Values:

1	notPresent
2	other
3	hundredBaseFxScMmf
4	hundredBaseFxScSmf
5	hundredBaseFxMtrjMmf
6	thousandBaseSxScMmf
7	thousandBaseSxMtrjMmf
8	thousandBaseXGbic
9	thousandBaseLxScSmf
10	thousandBaseT
11	stackingModule
12	thousandBaseSfp
13	tenHundredBaseT4port
14	tenHundredBaseFxMtrj4port
15	comboStackingSfp
16	tenHundredBaseT

.1.3.6.1.4.1.52.4.12.30.1.1.3.1.12

v2h124swServiceTag

Service tag serial-number of the switch.

OctetString

Constraints:
range: 0-80

.1.3.6.1.4.1.52.4.12.30.1.1.3.1.13

portTable

table

.1.3.6.1.4.1.52.4.12.30.1.2.1 · 1 row entry · 10 columns

Open in standard view

Table of descriptive and status information describing 
the configuration of each switch port. This table also 
contains information about each trunk.

portEntry entry .1.3.6.1.4.1.52.4.12.30.1.2.1.1

An entry in the table, describing the configuration of
one switch port or trunk.

Indexes

portIndex

Column Syntax OID

portIndex

The port and the trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.12.30.1.2.1.1.1

portName

The name of the port or trunk. This is the same as ifAlias
in the IF-MIB (RFC2863 or later).

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.52.4.12.30.1.2.1.1.2

portType

Indicates the port type of the configuration of the switch

Enumeration

Enumerated Values:

1	other
2	hundredBaseTX
3	hundredBaseFX
4	thousandBaseSX
5	thousandBaseLX
6	thousandBaseT
7	thousandBaseGBIC
8	thousandBaseSfp
9	hundredBaseFxScSingleMode
10	hundredBaseFxScMultiMode

.1.3.6.1.4.1.52.4.12.30.1.2.1.1.3

portSpeedDpxCfg

Configures the speed and duplex mode for a port or trunk,
according to:
halfDuplex10(2) - 10Mbps and half duplex mode
fullDuplex10(3) - 10Mbps and full duplex mode
halfDuplex100(4) - 100Mbps and hal…

Enumerationr/w

Enumerated Values:

1	reserved
2	halfDuplex10
3	fullDuplex10
4	halfDuplex100
5	fullDuplex100
6	halfDuplex1000
7	fullDuplex1000

.1.3.6.1.4.1.52.4.12.30.1.2.1.1.4

portFlowCtrlCfg

(1) Flow control mechanism is enabled.
If the port type is hundredBaseTX or thousandBaseSX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	backPressure
4	dot3xFlowControl

.1.3.6.1.4.1.52.4.12.30.1.2.1.1.5

portCapabilities

Port or trunk capabilities.

Bitsr/w

Enumerated Values:

0	portCap10half
1	portCap10full
2	portCap100half
3	portCap100full
4	portCap1000half
5	portCap1000full
6	reserved6
7	reserved7
8	reserved8
9	reserved9
10	reserved10
11	reserved11
12	reserved12
13	reserved13
14	portCapSym
15	portCapFlowCtrl

.1.3.6.1.4.1.52.4.12.30.1.2.1.1.6

portAutonegotiation

Whether auto-negotiation is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.52.4.12.30.1.2.1.1.7

portSpeedDpxStatus

The operating speed and duplex mode of the
switched port or trunk. If the entry represents a trunk,
the speed is that of its individual members unless
the member ports have been inconsistently configured
in which case t…

Enumeration

Enumerated Values:

1	error
2	halfDuplex10
3	fullDuplex10
4	halfDuplex100
5	fullDuplex100
6	halfDuplex1000
7	fullDuplex1000

.1.3.6.1.4.1.52.4.12.30.1.2.1.1.8

portFlowCtrlStatus

(2) BackPressure flow control machanism is used.
(3) IEEE 802.3 flow control machanism is used.
(4) Flow control mechanism is disabled.
If the entry represents a trunk and the member ports
have been inconsistently conf…

Enumeration

Enumerated Values:

1	error
2	backPressure
3	dot3xFlowControl
4	none

.1.3.6.1.4.1.52.4.12.30.1.2.1.1.9

portTrunkIndex

The trunk to which this port belongs. A value of 0
means that this port does not belong to any trunk.
A value greater than zero means that this port
belongs to trunk at trunkIndex, defined by the
corresponding trunkPort…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.12.30.1.2.1.1.10

trunkTable

table

.1.3.6.1.4.1.52.4.12.30.1.3.3 · 1 row entry · 4 columns

Open in standard view

Table describing the configuration and status of each 
trunk.

trunkEntry entry .1.3.6.1.4.1.52.4.12.30.1.3.3.1

An entry describing the configuration and status of a
particular trunk.

Indexes

trunkIndex

Column Syntax OID

trunkIndex

Identifies the trunk within the switch that is
described by the table entry.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.12.30.1.3.3.1.1

trunkPorts

The complete set of ports currently associated with
this trunk.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.52.4.12.30.1.3.3.1.2

trunkCreation

A value of static(1) means a statically configured trunk.
A value of lacp(2) means an LACP-configured trunk.

Enumeration

Enumerated Values:

1	static
2	lacp

.1.3.6.1.4.1.52.4.12.30.1.3.3.1.3

trunkStatus

Writing this to valid(1) creates an entry.
Writing this to invalid(2) destroys an entry.
A trunk created by LACP cannot be manually destroyed
or (re)configured.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.52.4.12.30.1.3.3.1.4

lacpPortTable

table

.1.3.6.1.4.1.52.4.12.30.1.4.1 · 1 row entry · 2 columns

Open in standard view

Table for LACP port configuration.

lacpPortEntry entry .1.3.6.1.4.1.52.4.12.30.1.4.1.1

Entry for LACP port configuration. While an entry may
exist for a particular port, the port may not support
LACP and an attempt to enable LACP may result in
failure.

Indexes

lacpPortIndex

Column Syntax OID

lacpPortIndex

The port interface of the lacpPortTable. The interface
identified by a particular value of this index is the
same interface as identified by the same value of
ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.12.30.1.4.1.1.1

lacpPortStatus

Whether 802.3ad LACP is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.52.4.12.30.1.4.1.1.2

staPortTable

table

.1.3.6.1.4.1.52.4.12.30.1.5.2 · 1 row entry · 7 columns

Open in standard view

The table manages port settings for Spanning Tree 
Protocol 802.1d, or 802.1w depending on the 
value specified by staProtocolType.

staPortEntry entry .1.3.6.1.4.1.52.4.12.30.1.5.2.1

The conceptual entry of staPortTable.

Indexes

No indexes recorded

Column Syntax OID

staPortFastForward

Whether fast forwarding is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.52.4.12.30.1.5.2.1.2

staPortProtocolMigration

When operating in RSTP (version 2) mode, setting this
object to TRUE(1) object forces the port to transmit

RSTP BPDUs. Any other operation on this object has no
effect and it always returns FALSE(2) when…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.52.4.12.30.1.5.2.1.3

staPortAdminEdgePort

The administrative value of the Edge Port parameter. A
value of TRUE(1) indicates that this port should be
assumed to be an edge-port and a value of FALSE(2) indicates
that this port should be assumed to be a non-edge-…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.52.4.12.30.1.5.2.1.4

staPortOperEdgePort

The operational value of the Edge Port parameter. The object is
initialized to the value of staPortAdminEdgePort and is set FALSE
when a BPDU is received.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.52.4.12.30.1.5.2.1.5

staPortAdminPointToPoint

The administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue(0) indicates that
this port should always be treated as if it is connected to
a point-to-point link. A value of f…

Enumerationr/w

Enumerated Values:

0	forceTrue
1	forceFalse
2	auto

.1.3.6.1.4.1.52.4.12.30.1.5.2.1.6

staPortOperPointToPoint

The operational point-to-point status of the LAN segment
attached to this port. It indicates whether a port is
considered to have a point-to-point connection or not.
The value is determined by explicit configuration or…

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.52.4.12.30.1.5.2.1.7

staPortLongPathCost

The contribution of this port to the path cost (as a 32
bit value) of paths towards the spanning tree root which
include this port.

This object is used to configure the spanning tree port
path cost as a 3…

Integer32r/w

Constraints:
range: 1-200000000

.1.3.6.1.4.1.52.4.12.30.1.5.2.1.8

xstInstanceCfgTable

table

.1.3.6.1.4.1.52.4.12.30.1.5.6.4 · 1 row entry · 16 columns

Open in standard view

This table is used to configure Rapid Spanning Tree. Only
the first row of the table is used by RST. In the future
this table may be used to support other spanning tree
protocols.

xstInstanceCfgEntry entry .1.3.6.1.4.1.52.4.12.30.1.5.6.4.1

A conceptual row containing the properties of the
RST instance.

Indexes

xstInstanceCfgIndex

Column Syntax OID

xstInstanceCfgIndex

The index for an entry in the xstInstanceCfgTable table. For
RST only the first row in the table is used.

Integer32

Constraints:
range: 1-64

.1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.1

xstInstanceCfgPriority

The priority of a specific spanning tree instance.
The value assigned should be in the range 0-61440
in steps of 4096.

Integer32r/w

Constraints:
range: 0-61440

.1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.2

xstInstanceCfgTimeSinceTopologyChange

The time (in hundredths of second) since the last topology
change detected by the bridge entity in RST.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.3

xstInstanceCfgTopChanges

The total number of topology changes detected by
this bridge in RST since the management entity
was last reset or initialized.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.4

xstInstanceCfgDesignatedRoot

The bridge identifier of the root of the spanning
tree as determined by the Rapid Spanning Tree Protocol
(802.1w) executed by this node. This value is used
as the Root Identifier parameter in all Configuration
Bridge …

BRIDGE-MIBBridgeId

Textual Convention: BRIDGE-MIBBridgeId OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.5

xstInstanceCfgRootCost

The cost of the path to the root as seen from
this bridge of the RST.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.6

xstInstanceCfgRootPort

The number of the port which offers the
lowest cost path from this bridge to the root
bridge of the RST .

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.7

xstInstanceCfgMaxAge

The maximum age of Rapid Spanning Tree Protocol
information learned from the network on any port before
it is discarded, in units of hundredths of a second. This
is the actual value that this bridge is currently using.

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.8

xstInstanceCfgHelloTime

The amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual v…

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.9

xstInstanceCfgHoldTime

This time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second.

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.10

xstInstanceCfgForwardDelay

For the RST protocol, this time value, measured in units of
hundredths of a second, controls how fast a port changes
its spanning state when moving towards the Forwarding
state. The value determines how long the port…

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.11

xstInstanceCfgBridgeMaxAge

For RST protocol, the time (in hundredths of second)
that all bridges use for MaxAge when this bridge is acting
as the root. Note that 802.1D-1990 specifies that the range
for this parameter is related to the value o…

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.12

xstInstanceCfgBridgeHelloTime

For the RST protocol, the time (in hundredths of second) that
all bridges use for HelloTime when this bridge is acting
as the root. The granularity of this timer is specified
by 802.1D-1990 to be 1 second.

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.13

xstInstanceCfgBridgeForwardDelay

For the RST protocol, the time (in hundredths of second)
that all bridges use for ForwardDelay when this bridge
is acting as the root.
Note that 802.1D-1990 specifies that the range for this
parameter is related to th…

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.14

xstInstanceCfgTxHoldCount

For the RST protocol, the value used by the Port Transmit
state machine to limit the maximum transmission rate.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.15

xstInstanceCfgPathCostMethod

For RST protocol, this indicates the type of spanning tree path
cost mode used by the switch. The mode applies to all instances of the
Spanning Tree protocol running on the switch.

When the value of this…

Enumeration

Enumerated Values:

1	short
2	long

.1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.16

xstInstancePortTable

table

.1.3.6.1.4.1.52.4.12.30.1.5.6.5 · 1 row entry · 10 columns

Open in standard view

The extension table for dot1dStpPortEntry to provide 
additional Spanning Tree information and configuration.

xstInstancePortEntry entry .1.3.6.1.4.1.52.4.12.30.1.5.6.5.1

The conceptual row for xstInstancePortTable.

Indexes

xstInstanceCfgIndex BRIDGE-MIBdot1dStpPort

Column Syntax OID

xstInstancePortPriority

Defines the priority used for this port in the Spanning
Tree Algorithm. If the path cost for all ports on a
switch is the same, the port with the highest priority
(i.e., lowest value) will be configured as an active li…

Integer32r/w

Constraints:
range: 0-240

.1.3.6.1.4.1.52.4.12.30.1.5.6.5.1.3

xstInstancePortState

The port's current state as defined by application of
the Spanning Tree Protocol. This state controls what
action a port takes on reception of a frame:
discarding(1) Port receives configuration messages,
…

Enumeration

Enumerated Values:

1	discarding
2	learning
3	forwarding

.1.3.6.1.4.1.52.4.12.30.1.5.6.5.1.4

xstInstancePortEnable

The enabled/disabled status of the port.

P-BRIDGE-MIBEnabledStatus

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.52.4.12.30.1.5.6.5.1.5

xstInstancePortPathCost

The pathcost of the RST in the range 1 to 200000000.
This parameter is used to determine the best path between
devices. Therefore, lower values should be assigned to
ports attached to faster media, and higher values as…

Integer32r/w

Constraints:
range: 1-200000000

.1.3.6.1.4.1.52.4.12.30.1.5.6.5.1.6

xstInstancePortDesignatedRoot

The unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached.

BRIDGE-MIBBridgeId

Textual Convention: BRIDGE-MIBBridgeId OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.52.4.12.30.1.5.6.5.1.7

xstInstancePortDesignatedCost

The path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.12.30.1.5.6.5.1.8

xstInstancePortDesignatedBridge

The Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment.

BRIDGE-MIBBridgeId

Textual Convention: BRIDGE-MIBBridgeId OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.52.4.12.30.1.5.6.5.1.9

xstInstancePortDesignatedPort

The Port Identifier of the port on the Designated
Bridge for this port's segment.

OctetString

Constraints:
range: 2-2

.1.3.6.1.4.1.52.4.12.30.1.5.6.5.1.10

xstInstancePortForwardTransitions

The number of times this port has transitioned
from the Learning state to the Forwarding state.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.52.4.12.30.1.5.6.5.1.11

xstInstancePortPortRole

The role of the port in the RST protocol:
(1) The port has no role within the spanning tree
(2) The port is part of the active topology connecting
the bridge to the root bridge (i.e., root port)
(3) The port is conn…

Enumeration

Enumerated Values:

1	disabled
2	root
3	designated
4	alternate
5	backup

.1.3.6.1.4.1.52.4.12.30.1.5.6.5.1.12

mirrorTable

table

.1.3.6.1.4.1.52.4.12.30.1.8.1 · 1 row entry · 4 columns

Open in standard view

Table for port mirroring, enabling a port to be mirrored
to/from another port. Not all ports cannot be mirrored and
limitations may apply as to which ports can be used as either
source or destination ports.

mirrorEntry entry .1.3.6.1.4.1.52.4.12.30.1.8.1.1

The conceptual row of mirrorTable.

Indexes

mirrorDestinationPort mirrorSourcePort

Column Syntax OID

mirrorDestinationPort

The destination port interface for mirrored packets.
The interface identified by a particular value of
this index is the same interface as identified by
the same value of ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.12.30.1.8.1.1.1

mirrorSourcePort

The source port interface for mirrored packets.
The interface identified by a particular value of
this index is the same interface as identified by
the same value of ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.12.30.1.8.1.1.2

mirrorType

If this value is rx(1), receive packets will
be mirrored. If this value is tx(2), transmit
packets will be mirrored. If this value is both(3),
both receive and transmit packets will be mirrored.

Enumerationr/w

Enumerated Values:

1	rx
2	tx
3	both

.1.3.6.1.4.1.52.4.12.30.1.8.1.1.3

mirrorStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.52.4.12.30.1.8.1.1.4

igmpSnoopRouterCurrentTable

table

.1.3.6.1.4.1.52.4.12.30.1.9.8 · 1 row entry · 3 columns

Open in standard view

Table for current router ports.

igmpSnoopRouterCurrentEntry entry .1.3.6.1.4.1.52.4.12.30.1.9.8.1

Entry for current router ports.

Indexes

igmpSnoopRouterCurrentVlanIndex

Column	Syntax	OID
igmpSnoopRouterCurrentVlanIndex The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopR…	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.52.4.12.30.1.9.8.1.1`
igmpSnoopRouterCurrentPorts The set of ports which are current router ports, including static router ports. Please refer to igmpSnoopRouterStaticTable.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.52.4.12.30.1.9.8.1.2`
igmpSnoopRouterCurrentStatus The set of ports which are static router ports.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.52.4.12.30.1.9.8.1.3`

igmpSnoopRouterStaticTable

table

.1.3.6.1.4.1.52.4.12.30.1.9.9 · 1 row entry · 3 columns

Open in standard view

Table for static router ports.

igmpSnoopRouterStaticEntry entry .1.3.6.1.4.1.52.4.12.30.1.9.9.1

Entry for static router ports.

Indexes

igmpSnoopRouterStaticVlanIndex

Column Syntax OID

igmpSnoopRouterStaticVlanIndex

The interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
igmpSnoopR…

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.52.4.12.30.1.9.9.1.1

igmpSnoopRouterStaticPorts

The set of ports which are static router ports.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.52.4.12.30.1.9.9.1.2

igmpSnoopRouterStaticStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.52.4.12.30.1.9.9.1.3

igmpSnoopMulticastCurrentTable

table

.1.3.6.1.4.1.52.4.12.30.1.9.10 · 1 row entry · 4 columns

Open in standard view

Table for current multicast addresses.

igmpSnoopMulticastCurrentEntry entry .1.3.6.1.4.1.52.4.12.30.1.9.10.1

Entry for current multicast addresses.

Indexes

igmpSnoopMulticastCurrentVlanIndex igmpSnoopMulticastCurrentIpAddress

Column	Syntax	OID
igmpSnoopMulticastCurrentVlanIndex The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopM…	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.52.4.12.30.1.9.10.1.1`
igmpSnoopMulticastCurrentIpAddress IP address of multicast group.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.52.4.12.30.1.9.10.1.2`
igmpSnoopMulticastCurrentPorts The set of ports which are members of a multicast group, including static members. Please refer to igmpSnoopMulticastStaticTable.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.52.4.12.30.1.9.10.1.3`
igmpSnoopMulticastCurrentStatus The set of ports which are static members.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.52.4.12.30.1.9.10.1.4`

igmpSnoopMulticastStaticTable

table

.1.3.6.1.4.1.52.4.12.30.1.9.11 · 1 row entry · 4 columns

Open in standard view

Table for static multicast addresses.

igmpSnoopMulticastStaticEntry entry .1.3.6.1.4.1.52.4.12.30.1.9.11.1

Entry for static multicast addresses.

Indexes

igmpSnoopMulticastStaticVlanIndex igmpSnoopMulticastStaticIpAddress

Column Syntax OID

igmpSnoopMulticastStaticVlanIndex

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.52.4.12.30.1.9.11.1.1

igmpSnoopMulticastStaticIpAddress

IP address of multicast group.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.52.4.12.30.1.9.11.1.2

igmpSnoopMulticastStaticPorts

The set of ports which are members.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.52.4.12.30.1.9.11.1.3

igmpSnoopMulticastStaticStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.52.4.12.30.1.9.11.1.4

netConfigTable

table

.1.3.6.1.4.1.52.4.12.30.1.10.1 · 1 row entry · 6 columns

Open in standard view

A table of netConfigEntries.

netConfigEntry entry .1.3.6.1.4.1.52.4.12.30.1.10.1.1

A set of configuration parameters for a particular
network interface on this device. If the device has no network
interface, this table is empty.

The index is composed of the ifIndex assigned to the
corresp…

Indexes

netConfigIfIndex netConfigIPAddress netConfigSubnetMask

Column Syntax OID

netConfigIfIndex

The VLAN interface being used by this table entry. Only the
VLAN interfaces which have an IP configured will appear in
the table.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.12.30.1.10.1.1.1

netConfigIPAddress

The IP address of this Net interface. The default value
for this object is 0.0.0.0. If either the netConfigIPAddress
or netConfigSubnetMask are 0.0.0.0, then when the device
boots, it may use BOOTP to try to figure ou…

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.52.4.12.30.1.10.1.1.2

netConfigSubnetMask

The subnet mask of this Net interface. The default value
for this object is 0.0.0.0. If either the netConfigIPAddress
or netConfigSubnetMask are 0.0.0.0, then when the device
boots, it may use BOOTP to try to figure o…

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.52.4.12.30.1.10.1.1.3

netConfigPrimaryInterface

Whether this is a primary interface.

Enumerationr/w

Enumerated Values:

1	primary
2	secondary

.1.3.6.1.4.1.52.4.12.30.1.10.1.1.4

netConfigUnnumbered

Whether this is an unnumbered interface.

Enumeration

Enumerated Values:

1	unnumbered
2	notUnnumbered

.1.3.6.1.4.1.52.4.12.30.1.10.1.1.5

netConfigStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- `active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.52.4.12.30.1.10.1.1.6

bcastStormTable

table

.1.3.6.1.4.1.52.4.12.30.1.11.1 · 1 row entry · 6 columns

Open in standard view

Table to manage the control of broadcast storms for ports.

bcastStormEntry entry .1.3.6.1.4.1.52.4.12.30.1.11.1.1

The conceptual row of bcastStormTable.

Indexes

bcastStormIfIndex

Column Syntax OID

bcastStormIfIndex

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.12.30.1.11.1.1.1

bcastStormStatus

Whether broadcast storm protection is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.52.4.12.30.1.11.1.1.2

bcastStormSampleType

Sample type. If this is pkt-rate(1), then bcastStormPktRate
is used to specify the broadcast storm threshold. If this
is octet-rate(2), then bcastStormOctetRate determines the
broadcast storm threshold. If this is perc…

Enumerationr/w

Enumerated Values:

1	pkt-rate
2	octet-rate
3	percent

.1.3.6.1.4.1.52.4.12.30.1.11.1.1.3

bcastStormPktRate

Broadcast storm threshold as packets per second.
If this entry is for a trunk, this is the value
for each member port.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.12.30.1.11.1.1.4

bcastStormOctetRate

Broadcast storm threshold as octets per second.
If this entry is for a trunk, this is the value
for each member port.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.12.30.1.11.1.1.5

bcastStormPercent

Broadcast storm threshold as percentage of bandwidth.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.12.30.1.11.1.1.6

vlanTable

table

.1.3.6.1.4.1.52.4.12.30.1.12.1 · 1 row entry · 2 columns

Open in standard view

Table for VLAN configuration.

vlanEntry entry .1.3.6.1.4.1.52.4.12.30.1.12.1.1

Entry for VLAN configuration.

Indexes

vlanIndex

Column Syntax OID

vlanIndex

Based on dot1qVlanIndex in the Q-BRIDGE-MIB.
This table has only one entry - the entry for
the VLAN of the management interface.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.52.4.12.30.1.12.1.1.1

vlanAddressMethod

Method to get the IP address.

Enumerationr/w

Enumerated Values:

1	user
2	bootp
3	dhcp

.1.3.6.1.4.1.52.4.12.30.1.12.1.1.2

vlanPortTable

table

.1.3.6.1.4.1.52.4.12.30.1.12.2 · 1 row entry · 2 columns

Open in standard view

Table for port configuration in VLAN.

vlanPortEntry entry .1.3.6.1.4.1.52.4.12.30.1.12.2.1

Entry for port configuration in VLAN.

Indexes

vlanPortIndex

Column Syntax OID

vlanPortIndex

The port and the trunk (excluding trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of dot1qPvid in the Q-BRID…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.12.30.1.12.2.1.1

vlanPortMode

This variable sets the 802.1Q VLAN mode.
Setting it to hybrid(1) sets a hybrid link.
Setting it to dot1qTrunk(2) sets a trunk link.
Setting it to access(3) sets an access link.

Enumerationr/w

Enumerated Values:

1	hybrid
2	dot1qTrunk
3	access

.1.3.6.1.4.1.52.4.12.30.1.12.2.1.2

prioIpPrecTable

table

.1.3.6.1.4.1.52.4.12.30.1.13.2 · 1 row entry · 3 columns

Open in standard view

Table for IP precedence priority mapping.

prioIpPrecEntry entry .1.3.6.1.4.1.52.4.12.30.1.13.2.1

Entry for IP precedence priority mapping.

Indexes

prioIpPrecPort prioIpPrecValue

Column	Syntax	OID
prioIpPrecPort The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.12.30.1.13.2.1.2`
prioIpPrecValue Value of IP ToS Precedence as specified in the packet header.	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.52.4.12.30.1.13.2.1.3`
prioIpPrecCos Class of Service (CoS) as defined by dot1dTrafficClassPriority in the P-BRIDGE-MIB. The IP ToS precedence value in the same table row will be mapped to this CoS. This CoS is then further mapped to the hardware queue a…	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.52.4.12.30.1.13.2.1.4`

prioIpDscpTable

table

.1.3.6.1.4.1.52.4.12.30.1.13.4 · 1 row entry · 3 columns

Open in standard view

Table for IP DSCP priority mapping.

prioIpDscpEntry entry .1.3.6.1.4.1.52.4.12.30.1.13.4.1

Entry for IP DSCP priority mapping.

Indexes

prioIpDscpPort prioIpDscpValue

Column	Syntax	OID
prioIpDscpPort The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.12.30.1.13.4.1.1`
prioIpDscpValue Value of IP DSCP as specified in the packet header.	Integer32 Constraints: `range: 0-63`	`.1.3.6.1.4.1.52.4.12.30.1.13.4.1.2`
prioIpDscpCos Class of Service as defined by dot1dTrafficClassPriority in the P-BRIDGE-MIB. The prioIpDscpValue value in the same table row will be mapped to this Class of Service (COS). This CoS is then further mapped to the hard…	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.52.4.12.30.1.13.4.1.3`

prioIpPortTable

table

.1.3.6.1.4.1.52.4.12.30.1.13.7 · 1 row entry · 4 columns

Open in standard view

Table for IP port priority mapping.

prioIpPortEntry entry .1.3.6.1.4.1.52.4.12.30.1.13.7.1

Entry for IP port priority mapping.

Indexes

prioIpPortPhysPort prioIpPortValue

Column Syntax OID

prioIpPortPhysPort

The port and the trunk (excluding trunk member) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.12.30.1.13.7.1.1

prioIpPortValue

IP port for this value.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.52.4.12.30.1.13.7.1.2

prioIpPortCos

Class of service for this entry.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.52.4.12.30.1.13.7.1.3

prioIpPortStatus

Writing this to valid(1) creates an entry.
Writing this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.52.4.12.30.1.13.7.1.4

prioWrrTable

table

.1.3.6.1.4.1.52.4.12.30.1.13.9 · 1 row entry · 2 columns

Open in standard view

Table for weighted round robin (WRR).

prioWrrEntry entry .1.3.6.1.4.1.52.4.12.30.1.13.9.1

Entry for weighted round robin (WRR).

Indexes

prioWrrTrafficClass

Column	Syntax	OID
prioWrrTrafficClass Traffic class for this entry, as defined in dot1dTrafficClass in the P-BRIDGE-MIB. The actual maximum depends on the hardware, and is equal to dot1dPortNumTrafficClasses-1.	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.52.4.12.30.1.13.9.1.1`
prioWrrWeight Weight for this entry.	Integer32r/w Constraints: `range: 1-255`	`.1.3.6.1.4.1.52.4.12.30.1.13.9.1.2`

trapDestTable

table

.1.3.6.1.4.1.52.4.12.30.1.14.1 · 1 row entry · 4 columns

Open in standard view

A list of trap destination entries.

trapDestEntry entry .1.3.6.1.4.1.52.4.12.30.1.14.1.1

A destination entry describes the destination IP address,
the community string and SNMP version to use when sending
a trap.

Indexes

trapDestAddress

Column Syntax OID

trapDestAddress

The address to send traps.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.52.4.12.30.1.14.1.1.1

trapDestCommunity

A community to which this destination address belongs.

OctetStringr/w

Constraints:
range: 0-127

.1.3.6.1.4.1.52.4.12.30.1.14.1.1.2

trapDestStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.52.4.12.30.1.14.1.1.3

trapDestVersion

Determines the version of the Trap that is to be sent to the
trap Receiver. If the value is 1, then a SNMP version 1 trap
will be sent and if the value is 2, a SNMP version 2 trap is
sent.

Enumerationr/w

Enumerated Values:

1	version1
2	version2

.1.3.6.1.4.1.52.4.12.30.1.14.1.1.4

rateLimitPortTable

table

.1.3.6.1.4.1.52.4.12.30.1.16.1.2 · 1 row entry · 5 columns

Open in standard view

Table for rate limit of each port.

rateLimitPortEntry entry .1.3.6.1.4.1.52.4.12.30.1.16.1.2.1

Entry for rate limit of each port.

Indexes

rlPortIndex

Column Syntax OID

rlPortIndex

The port and the trunk (including trunk member) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.12.30.1.16.1.2.1.1

rlPortInputLimit

Value of the input rate limit. Its unit is megabits per
second. For a 100 Mb/s port, the range is 1 to 100.
For a 1000 Mb/s port, the range is 1 to 1000.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.12.30.1.16.1.2.1.2

rlPortOutputLimit

Value of the output rate limit. Its unit is megabits per
second. For a 100 Mb/s port, the range is 1 to 100.
For a 1000 Mb/s port, the range is 1 to 1000.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.12.30.1.16.1.2.1.3

rlPortInputStatus

Whether input rate limit is enabled for this port.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.52.4.12.30.1.16.1.2.1.6

rlPortOutputStatus

Whether output rate limit is enabled for this port.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.52.4.12.30.1.16.1.2.1.7

markerTable

table

.1.3.6.1.4.1.52.4.12.30.1.16.2.1 · 1 row entry · 7 columns

Open in standard view

The marker table.

markerEntry entry .1.3.6.1.4.1.52.4.12.30.1.16.2.1.1

Entry for marker table.

Indexes

markerIfIndex markerAclName

Column Syntax OID

markerIfIndex

The interface index of the marker table.
The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.12.30.1.16.2.1.1.1

markerAclName

The name of an ACL. Within a feature the
name is unique used to identifies
the list to which the entry belongs in the device.

OctetString

Constraints:
range: 1-15

.1.3.6.1.4.1.52.4.12.30.1.16.2.1.1.2

markerActionBitList

The marker action bit list,
in right to left order.
for example:
0x3(11 in binary) means dscp(0) and precedence(1)
0x4(100 in binary) means priority(2)

Bitsr/w

Enumerated Values:

0	dscp
1	precedence
2	priority

.1.3.6.1.4.1.52.4.12.30.1.16.2.1.1.3

markerDscp

The Dscp value of the marker entry.

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.52.4.12.30.1.16.2.1.1.4

markerPrecedence

The precedence value of the marker entry.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.52.4.12.30.1.16.2.1.1.5

markerPriority

The priority value of the marker entry.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.52.4.12.30.1.16.2.1.1.6

markerStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- `active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.52.4.12.30.1.16.2.1.1.7

prioAclToCosMappingTable

table

.1.3.6.1.4.1.52.4.12.30.1.16.3.1 · 1 row entry · 4 columns

Open in standard view

Table for Acl to Cos Mapping.

prioAclToCosMappingEntry entry .1.3.6.1.4.1.52.4.12.30.1.16.3.1.1

Entry for Acl to Cos Mapping.

Indexes

prioAclToCosMappingIfIndex prioAclToCosMappingAclName

Column Syntax OID

prioAclToCosMappingIfIndex

The port interface of the prioAclToCosMappingEntry. The interface
identified by a particular value of this index is the
same interface as identified by the same value of
ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.12.30.1.16.3.1.1.1

prioAclToCosMappingAclName

The name of an IP ACL. Within a feature the
name is unique used to identifies
the list to which the entry belongs in the device.

OctetString

Constraints:
range: 1-15

.1.3.6.1.4.1.52.4.12.30.1.16.3.1.1.2

prioAclToCosMappingCosValue

Cos value of the prioAclToCosMappingTable.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.52.4.12.30.1.16.3.1.1.3

prioAclToCosMappingStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- `active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.52.4.12.30.1.16.3.1.1.4

portSecPortTable

table

.1.3.6.1.4.1.52.4.12.30.1.17.2.1 · 1 row entry · 4 columns

Open in standard view

The Port Security(MAC binding) Table

portSecPortEntry entry .1.3.6.1.4.1.52.4.12.30.1.17.2.1.1

The entry of portSecPortTable

Indexes

portSecPortIndex

Column Syntax OID

portSecPortIndex

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.12.30.1.17.2.1.1.1

portSecPortStatus

Set enabled(1) to enable port security and set disabled(2) to
disable port security.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.52.4.12.30.1.17.2.1.1.2

portSecAction

The corresponding actions that will take place when a
port is under intruded, when this variable is set to
none(1), no action will perform, when this variable is
set to trap(2), a swPortSecurityTrap trap will send,
…

Enumerationr/w

Enumerated Values:

1	none
2	trap
3	shutdown
4	trapAndShutdown

.1.3.6.1.4.1.52.4.12.30.1.17.2.1.1.3

portSecMaxMacCount

The maximun number of MAC addresses that will be learned and locked.
When we change the value of this variable, if the
portSecPortStatus is enabled, we will discard all secure MAC
and begin to learn again, until the n…

Integer32r/w

Constraints:
range: 0-20

.1.3.6.1.4.1.52.4.12.30.1.17.2.1.1.4

sshConnInfoTable

table

.1.3.6.1.4.1.52.4.12.30.1.17.6.6 · 1 row entry · 7 columns

Open in standard view

The table for Secure Shell Connection.

sshConnInfoEntry entry .1.3.6.1.4.1.52.4.12.30.1.17.6.6.1

The conceptual row for sshConnInfoTable.

Indexes

sshConnID

Column Syntax OID

sshConnID

The connection ID of the Secure Shell Connection.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.12.30.1.17.6.6.1.1

sshConnMajorVersion

The SSH major version.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.12.30.1.17.6.6.1.2

sshConnMinorVersion

The SSH minor version.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.12.30.1.17.6.6.1.3

sshConnEncryptionType

The encryption type of the SSH. none(1) mean no encryption
, des(2) mean using DES encryption, tribeDes mean using
3DES encryption.

Enumeration

Enumerated Values:

1	none
2	des
3	tribeDes

.1.3.6.1.4.1.52.4.12.30.1.17.6.6.1.4

sshConnStatus

The SSH connection State. negotiationStart(1) mean the
SSH is in its negotiation start state, authenticationStart(2)
mean the SSH is in authentication start state, sessionStart(3)
mean the SSH is in session start State.

Enumeration

Enumerated Values:

1	negotiationStart
2	authenticationStart
3	sessionStart

.1.3.6.1.4.1.52.4.12.30.1.17.6.6.1.5

sshConnUserName

The user name of the connection.

OctetString

.1.3.6.1.4.1.52.4.12.30.1.17.6.6.1.6

sshDisconnect

Set the variable to disconnect to disconnect the connection,
when read, this variable always return noDisconnect(1).

Enumerationr/w

Enumerated Values:

1	noDisconnect
2	disconnect

.1.3.6.1.4.1.52.4.12.30.1.17.6.6.1.7

aclIpAceTable

table

.1.3.6.1.4.1.52.4.12.30.1.17.7.1 · 1 row entry · 23 columns

Open in standard view

The conceptual table of all of aclIpAceEntry

aclIpAceEntry entry .1.3.6.1.4.1.52.4.12.30.1.17.7.1.1

The conceptual row for aclIpAceTable.

Indexes

aclIpAceName aclIpAceIndex

Column Syntax OID

aclIpAceName

The name of an ACL. Within a feature the
name is unique used to identifies
the list to which the entry belongs in the device

OctetString

Constraints:
range: 1-15

.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.1

aclIpAceIndex

The unique index of an ACE within an ACL

Integer32

Constraints:
range: 1-32

.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.2

aclIpAcePrecedence

Specifies the IP precedence value

Integer32

Constraints:
range: 0-32

.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.3

aclIpAceAction

the aclIpAceAction of aces which have the same aclIpAceName must be the same

Enumerationr/w

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.4

aclIpAceSourceIpAddr

The specified source IP address. The packet's source address is
AND-ed with the value of aclIpAceSourceIpAddrBitmask and then compared
against the value of this object.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.5

aclIpAceSourceIpAddrBitmask

The specified source IP address mask

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.6

aclIpAceDestIpAddr

The specified destination IP address. The packet's destination address is
AND-ed with the value of aclIpAceDestIpAddrBitmask and then compared
against the value of this object

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.7

aclIpAceDestIpAddrBitmask

The specified destination IP address mask

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.8

aclIpAceProtocol

The protocol number field in the IP header used to indicate
the higher layer protocol as specified in RFC 1700. A value
value of 0 matches every IP packet. the object=256, means 'any'

For example :
0 is …

Integer32r/w

Constraints:
range: 0-256

.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.9

aclIpAcePrec

Integer32r/w

Constraints:
range: 0-8

.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.10

aclIpAceTos

Integer32r/w

Constraints:
range: 0-8

.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.11

aclIpAceDscp

Integer32r/w

Constraints:
range: 0-64

.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.12

aclIpAceSourcePortOp

Enumerationr/w

Enumerated Values:

1	noOperator
2	equal
3	range

.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.13

aclIpAceMinSourcePort

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.14

aclIpAceMaxSourcePort

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.15

aclIpAceSourcePortBitmask

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.16

aclIpAceDestPortOp

Enumerationr/w

Enumerated Values:

1	noOperator
2	equal
3	range

.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.17

aclIpAceMinDestPort

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.18

aclIpAceMaxDestPort

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.19

aclIpAceDestPortBitmask

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.20

aclIpAceControlCode

Indicates how a the control flags of TCP packet's to be compared
to be compared. aceIpControlCode is AND-ed with aceIpControlCodeBitmask

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.21

aclIpAceControlCodeBitmask

Indicates how a the control flags of TCP packet's to be compared
to be compared. it can be used to check multiple flags of the FIN, SYN, RST, PSH, ACK, URG by sum of
FIN=1, SYN=2, RST=4, PSH=8, ACK=16, URG=32

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.22

aclIpAceStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- `active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.23

aclMacAceTable

table

.1.3.6.1.4.1.52.4.12.30.1.17.7.2 · 1 row entry · 18 columns

Open in standard view

The conceptual table of all of aclMacAceEntry

aclMacAceEntry entry .1.3.6.1.4.1.52.4.12.30.1.17.7.2.1

The conceptual row for aclMacAceTable.

Indexes

aclMacAceName aclMacAceIndex

Column Syntax OID

aclMacAceName

The name of an ACL. Within a feature the
name is unique used to identifies
the list to which the entry belongs in the device

OctetString

Constraints:
range: 1-15

.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.1

aclMacAceIndex

The unique index of an ACE within an ACL

Integer32

Constraints:
range: 1-32

.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.2

aclMacAcePrecedence

Specifies the IP precedence value

Integer32

Constraints:
range: 0-32

.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.3

aclMacAceAction

the aclMacAceAction of aces which have the same aclMacAceName must be the same

Enumerationr/w

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.4

aclMacAcePktformat

used to check the packet format of the packets

Enumerationr/w

Enumerated Values:

1	any
2	untagged-Eth2
3	untagged802Dot3
4	tagggedEth2
5	tagged802Dot3

.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.5

aclMacAceSourceMacAddr

Indicates the 48 bits destination MAC address.
The specified source mac of the packet The packet's source mac address is
AND-ed with the value of aceMacSourceMacAddrBitmask and then compared
against the value of this o…

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.6

aclMacAceSourceMacAddrBitmask

The specified source mac address mask.

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.7

aclMacAceDestMacAddr

Indicates the 48 bits destination MAC address.
The specified destination mac of the packet The packet's destination mac address is
AND-ed with the value of aceMacDestMacAddrBitmask and then compared
against the value o…

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.8

aclMacAceDestMacAddrBitmask

The specified destination mac address mask.

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.9

aclMacAceVidOp

Enumerationr/w

Enumerated Values:

1	noOperator
2	equal
3	range

.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.10

aclMacAceMinVid

Integer32r/w

Constraints:
range: 1-4095

.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.11

aclMacAceVidBitmask

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.12

aclMacAceMaxVid

Integer32r/w

Constraints:
range: 1-4095

.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.13

aclMacAceEtherTypeOp

Enumerationr/w

Enumerated Values:

1	noOperator
2	equal
3	range

.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.14

aclMacAceEtherTypeBitmask

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.15

aclMacAceMinEtherType

Integer32r/w

Constraints:
range: 1536-65535

.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.16

aclMacAceMaxEtherType

Integer32r/w

Constraints:
range: 1536-65535

.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.17

aclMacAceStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- `active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.18

aclAclGroupTable

table

.1.3.6.1.4.1.52.4.12.30.1.17.7.3 · 1 row entry · 5 columns

Open in standard view

the conceptual table of aclAclGroupEntry

aclAclGroupEntry entry .1.3.6.1.4.1.52.4.12.30.1.17.7.3.1

The conceptual row for aclAclGroupTable.

Indexes

aclAclGroupIfIndex

Column	Syntax	OID
aclAclGroupIfIndex the interface number specified the ACL bining to.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.12.30.1.17.7.3.1.1`
aclAclGroupIngressIpAcl specified the ingress ip acl(standard or extended) binding to the interface.	OctetStringr/w Constraints: `range: 0-15`	`.1.3.6.1.4.1.52.4.12.30.1.17.7.3.1.2`
aclAclGroupEgressIpAcl specified the egress ip acl(standard or extended) binding to the interface.	OctetStringr/w Constraints: `range: 0-15`	`.1.3.6.1.4.1.52.4.12.30.1.17.7.3.1.3`
aclAclGroupIngressMacAcl specified the ingress mac acl binding to the interface.	OctetStringr/w Constraints: `range: 0-15`	`.1.3.6.1.4.1.52.4.12.30.1.17.7.3.1.4`
aclAclGroupEgressMacAcl specified the egress mac acl binding to the interface.	OctetStringr/w Constraints: `range: 0-15`	`.1.3.6.1.4.1.52.4.12.30.1.17.7.3.1.5`

aclIngressIpMaskTable

table

.1.3.6.1.4.1.52.4.12.30.1.17.7.4 · 1 row entry · 12 columns

Open in standard view

the conceptual table of aclIngressIpMaskEntry

aclIngressIpMaskEntry entry .1.3.6.1.4.1.52.4.12.30.1.17.7.4.1

The conceptual row for aclIngressIpMaskTable.

Indexes

aclIngressIpMaskIndex

Column Syntax OID

aclIngressIpMaskIndex

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.52.4.12.30.1.17.7.4.1.1

aclIngressIpMaskPrecedence

Integer32

Constraints:
range: 0-16

.1.3.6.1.4.1.52.4.12.30.1.17.7.4.1.2

aclIngressIpMaskIsEnableTos

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.52.4.12.30.1.17.7.4.1.3

aclIngressIpMaskIsEnableDscp

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.52.4.12.30.1.17.7.4.1.4

aclIngressIpMaskIsEnablePrecedence

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.52.4.12.30.1.17.7.4.1.5

aclIngressIpMaskIsEnableProtocol

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.52.4.12.30.1.17.7.4.1.6

aclIngressIpMaskSourceIpAddrBitmask

Unsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.52.4.12.30.1.17.7.4.1.7

aclIngressIpMaskDestIpAddrBitmask

Unsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.52.4.12.30.1.17.7.4.1.8

aclIngressIpMaskSourcePortBitmask

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.52.4.12.30.1.17.7.4.1.9

aclIngressIpMaskDestPortBitmask

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.52.4.12.30.1.17.7.4.1.10

aclIngressIpMaskControlCodeBitmask

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.52.4.12.30.1.17.7.4.1.11

aclIngressIpMaskStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- `active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.52.4.12.30.1.17.7.4.1.12

aclEgressIpMaskTable

table

.1.3.6.1.4.1.52.4.12.30.1.17.7.5 · 1 row entry · 12 columns

Open in standard view

the conceptual table of aclEgressIpMaskEntry

aclEgressIpMaskEntry entry .1.3.6.1.4.1.52.4.12.30.1.17.7.5.1

The conceptual row for aclEgressIpMaskTable.

Indexes

aclEgressIpMaskIndex

Column Syntax OID

aclEgressIpMaskIndex

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.52.4.12.30.1.17.7.5.1.1

aclEgressIpMaskPrecedence

Integer32

Constraints:
range: 0-16

.1.3.6.1.4.1.52.4.12.30.1.17.7.5.1.2

aclEgressIpMaskIsEnableTos

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.52.4.12.30.1.17.7.5.1.3

aclEgressIpMaskIsEnableDscp

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.52.4.12.30.1.17.7.5.1.4

aclEgressIpMaskIsEnablePrecedence

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.52.4.12.30.1.17.7.5.1.5

aclEgressIpMaskIsEnableProtocol

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.52.4.12.30.1.17.7.5.1.6

aclEgressIpMaskSourceIpAddrBitmask

Unsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.52.4.12.30.1.17.7.5.1.7

aclEgressIpMaskDestIpAddrBitmask

Unsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.52.4.12.30.1.17.7.5.1.8

aclEgressIpMaskSourcePortBitmask

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.52.4.12.30.1.17.7.5.1.9

aclEgressIpMaskDestPortBitmask

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.52.4.12.30.1.17.7.5.1.10

aclEgressIpMaskControlCodeBitmask

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.52.4.12.30.1.17.7.5.1.11

aclEgressIpMaskStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- `active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.52.4.12.30.1.17.7.5.1.12

aclIngressMacMaskTable

table

.1.3.6.1.4.1.52.4.12.30.1.17.7.6 · 1 row entry · 8 columns

Open in standard view

the conceptual table of aclIngressMacMaskEntry

aclIngressMacMaskEntry entry .1.3.6.1.4.1.52.4.12.30.1.17.7.6.1

The conceptual row for aclIngressMacMaskTable.

Indexes

aclIngressMacMaskIndex

Column Syntax OID

aclIngressMacMaskIndex

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.52.4.12.30.1.17.7.6.1.1

aclIngressMacMaskPrecedence

Integer32

Constraints:
range: 0-16

.1.3.6.1.4.1.52.4.12.30.1.17.7.6.1.2

aclIngressMacMaskSourceMacAddrBitmask

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.52.4.12.30.1.17.7.6.1.3

aclIngressMacMaskDestMacAddrBitmask

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.52.4.12.30.1.17.7.6.1.4

aclIngressMacMaskVidBitmask

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.52.4.12.30.1.17.7.6.1.5

aclIngressMacMaskEtherTypeBitmask

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.52.4.12.30.1.17.7.6.1.6

aclIngressMacMaskIsEnablePktformat

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.52.4.12.30.1.17.7.6.1.7

aclIngressMacMaskStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- `active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.52.4.12.30.1.17.7.6.1.8

aclEgressMacMaskTable

table

.1.3.6.1.4.1.52.4.12.30.1.17.7.7 · 1 row entry · 8 columns

Open in standard view

the conceptual table of aclEgressMacMaskEntry

aclEgressMacMaskEntry entry .1.3.6.1.4.1.52.4.12.30.1.17.7.7.1

The conceptual row for aclEgressMacMaskTable.

Indexes

aclEgressMacMaskIndex

Column Syntax OID

aclEgressMacMaskIndex

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.52.4.12.30.1.17.7.7.1.1

aclEgressMacMaskPrecedence

Integer32

Constraints:
range: 0-16

.1.3.6.1.4.1.52.4.12.30.1.17.7.7.1.2

aclEgressMacMaskSourceMacAddrBitmask

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.52.4.12.30.1.17.7.7.1.3

aclEgressMacMaskDestMacAddrBitmask

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.52.4.12.30.1.17.7.7.1.4

aclEgressMacMaskVidBitmask

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.52.4.12.30.1.17.7.7.1.5

aclEgressMacMaskEtherTypeBitmask

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.52.4.12.30.1.17.7.7.1.6

aclEgressMacMaskIsEnablePktformat

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.52.4.12.30.1.17.7.7.1.7

aclEgressMacMaskStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- `active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.52.4.12.30.1.17.7.7.1.8

sntpServerTable

table

.1.3.6.1.4.1.52.4.12.30.1.23.1.4 · 1 row entry · 2 columns

Open in standard view

Table for SNTP servers

sntpServerEntry entry .1.3.6.1.4.1.52.4.12.30.1.23.1.4.1

Entry for SNTP servers.

Indexes

sntpServerIndex

Column	Syntax	OID
sntpServerIndex The index of a server. This table has fixed size.	Integer32 Constraints: `range: 1-3`	`.1.3.6.1.4.1.52.4.12.30.1.23.1.4.1.1`
sntpServerIpAddress The IP address of a server. Valid IP addresses must occupy contiguous indexes. All IP addresses after the last valid index is 0.	SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.52.4.12.30.1.23.1.4.1.2`

fileInfoTable

table

.1.3.6.1.4.1.52.4.12.30.1.24.2.1 · 1 row entry · 7 columns

Open in standard view

This table contain the information of the file system,
we can also perform the delete, set startup file operation.

fileInfoEntry entry .1.3.6.1.4.1.52.4.12.30.1.24.2.1.1

A conceptually row for fileInfoTable.

Indexes

fileInfoUnitID fileInfoFileName

Column Syntax OID

fileInfoUnitID

The unit of the switch in a stacking system, in a
non-stacking system, it value is always 1.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.12.30.1.24.2.1.1.1

fileInfoFileName

The file Name of the file System in the device.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.52.4.12.30.1.24.2.1.1.2

fileInfoFileType

The file type of the file System in the device.

Enumeration

Enumerated Values:

1	diag
2	runtime
3	syslog
4	cmdlog
5	config
6	postlog
7	private
8	certificate
9	webarchive

.1.3.6.1.4.1.52.4.12.30.1.24.2.1.1.3

fileInfoIsStartUp

This flag indicate whether this file is a startup file, Setting this
object to truth(1) to indicate this is a startup file, setting this
object to false(2) is a invalid operation.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.52.4.12.30.1.24.2.1.1.4

fileInfoFileSize

The sizes( in bytes) of the file.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.12.30.1.24.2.1.1.5

fileInfoCreationTime

The creation time of the file.

OctetString

Constraints:
range: 20-20

.1.3.6.1.4.1.52.4.12.30.1.24.2.1.1.6

fileInfoDelete

Writing this object to delete(2) to delete a file, when
read, this always return noDelete(1).

Enumerationr/w

Enumerated Values:

1	noDelete
2	delete

.1.3.6.1.4.1.52.4.12.30.1.24.2.1.1.7