portSpeedDpxCfg
V2H124-24-MIB ·
.1.3.6.1.4.1.52.4.12.30.1.2.1.1.4
Object
column
r/w
Enumeration
Configures the speed and duplex mode for a port or trunk,
according to:
halfDuplex10(2) - 10Mbps and half duplex mode
fullDuplex10(3) - 10Mbps and full duplex mode
halfDuplex100(4) - 100Mbps and half duplex mode
fullDuplex100(5) - 100Mbps and full duplex mode
halfDuplex1000(6) - 1000Mbps and half duplex mode
fullDuplex1000(7) - 1000Mbps and full duplex mode
hundredBaseTX port can be set as
halfDuplex10(2)
fullDuplex10(3)
halfDuplex100(4)
fullDuplex100(5)
hundredBaseFX port can be set as
halfDuplex100(4)
fullDuplex100(5)
thousandBaseSX port can be set as
halfDuplex1000(6)
fullDuplex1000(7)
The actual operating speed and duplex of the port
is given by portSpeedDpxStatus.
Context
- MIB
- V2H124-24-MIB
- OID
.1.3.6.1.4.1.52.4.12.30.1.2.1.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- portEntry
- Table
- portTable
- Siblings
- 9
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | reserved |
2 | halfDuplex10 |
3 | fullDuplex10 |
4 | halfDuplex100 |
5 | fullDuplex100 |
6 | halfDuplex1000 |
7 | fullDuplex1000 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| portIndex The port and the trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by th… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.52.4.12.30.1.2.1.1.1 |
| portTrunkIndex The trunk to which this port belongs. A value of 0
means that this port does not belong to any trunk.
A value greater than zero means that this port
belongs to trunk at trunkIndex… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.52.4.12.30.1.2.1.1.10 |
| portName The name of the port or trunk. This is the same as ifAlias
in the IF-MIB (RFC2863 or later). | column | OctetString | .1.3.6.1.4.1.52.4.12.30.1.2.1.1.2 |
| portType Indicates the port type of the configuration of the switch | column | Enumeration | .1.3.6.1.4.1.52.4.12.30.1.2.1.1.3 |
| portFlowCtrlCfg (1) Flow control mechanism is enabled.
If the port type is hundredBaseTX or thousandBaseSX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control … | column | Enumeration | .1.3.6.1.4.1.52.4.12.30.1.2.1.1.5 |
| portCapabilities Port or trunk capabilities. | column | Bits | .1.3.6.1.4.1.52.4.12.30.1.2.1.1.6 |
| portAutonegotiation Whether auto-negotiation is enabled. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.52.4.12.30.1.2.1.1.7 |
| portSpeedDpxStatus The operating speed and duplex mode of the
switched port or trunk. If the entry represents a trunk,
the speed is that of its individual members unless
the member ports have been i… | column | Enumeration | .1.3.6.1.4.1.52.4.12.30.1.2.1.1.8 |
| portFlowCtrlStatus (2) BackPressure flow control machanism is used.
(3) IEEE 802.3 flow control machanism is used.
(4) Flow control mechanism is disabled.
If the entry represents a trunk and the mem… | column | Enumeration | .1.3.6.1.4.1.52.4.12.30.1.2.1.1.9 |