TROPIC-PTP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
16
Rows
16
Columns
141

tnPtpSystemTable

table
.1.3.6.1.4.1.7483.2.2.4.9.1.1.1 · 1 row entry · 7 columns
Open in standard view 
This table provides global parameters for a
PTP-capable card.
tnPtpSystemEntry entry .1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1
Configuration information concerning PTP of the
card.
Indexes
TROPIC-SHELF-MIBtnShelfIndex TROPIC-SLOT-MIBtnSlotIndex
Column Syntax OID
tnPtpSystemClockMode
This parameter determines the PTP operational
mode of the card. It is intended to be managed
by the System Operator.

0: 1588 function of this card is disabled
1: Ordinary Clock - Slave
2: Ordinary Clock …
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1.1
tnPtpSystemFrequencyReference
This parameter determines the frequency reference
for the PTP clocks in the card. It is intended
to be managed by the System Operator.

This parameter is valid when the
tnPtpSystemClockMode = 1/2/3/6/7/8
…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1.2
tnPtpSystemTimeReference
This parameter determines the time reference
for the local PTP clocks in the card. It is
intended to be managed by the System Operator.
This parameter is valid when the
tnPtpSystemClockMode = 2/3

0: no r…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1.3
tnPtpSystemNextClockNumber
This parameter indicates the next available
clock number in the card, which will be used
when the user wants to create a new row in the
tnPtpClockDefaultDSConfigTable.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1.4
tnPtpSystemClockProfile
This parameter determines the PTP profile
of the card. It is intended to be managed
by the System Operator.

0: IEEE_1588_2008_CCSA profile
1: G_8275_1 profile.
Enumerationr/w
Enumerated Values:
0ieee-1588-2008-CCSA
1g-8275-1
 .1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1.5
tnPtpSystemClockServoMode
This parameter determines the PTP Servo Mode
of the card. It is intended to be managed
by the System Operator.
0: bellLabs
1: standard
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1.6
tnPtpSystemToDMessageType
ToD message format type.

0: ccsa
1: itu.
Enumerationr/w
Enumerated Values:
0ccsa
1itu
 .1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1.7

tnPtpClockDefaultDSConfigTable

table
.1.3.6.1.4.1.7483.2.2.4.9.1.2.1 · 1 row entry · 13 columns
Open in standard view 
This table provides configurable information
for an OC/BC PTP clock.  For TC (E2E or P2P),
this table is not available.
tnPtpClockDefaultDSConfigEntry entry .1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1
Configurations of an OC/BC PTP clock.
Indexes
tnPtpClockIndex
Column Syntax OID
tnPtpClockIndex
A unique value which identifies a PTP clock in
an NE.
AluWdmPtpClockIndex
Textual Convention: AluWdmPtpClockIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.1
tnPtpClockDefaultDSConfigDomain
The domain associated with the PTP clock.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.2
tnPtpClockDefaultDSConfigPriority1
The priority1 value of the PTP clock.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.3
tnPtpClockDefaultDSConfigPriority2
The priority2 value of the PTP clock.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.4
tnPtpClockDefaultDSConfigPreferedGM
The identifier of a PTP clock that the local
PTP clock will lock to. It is for static master
clock selection. It is valid for OC-slave or
BC. And for BC, it is valid only when
tnPtpSystemTimeReference =3. NULL is
init…
AluWdmPtpClockIdentifierr/w
Textual Convention: AluWdmPtpClockIdentifier OctetString
Type Constraints:
range: 8
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.5
tnPtpClockDefaultDSConfigIpAddressType
This parameter indicates the IP address type
for tnPtpClockDefaultDSConfigIpAddress. The
default value is IPv4(1).
InetAddressTyper/w
Textual Convention: InetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
16dns
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.6
tnPtpClockDefaultDSConfigIpAddress
The unicast IP address of the PTP clock. NULL
is initializing value.
InetAddressr/w
Textual Convention: InetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.7
tnPtpClockDefaultDSConfigAdminStatus
It is used for the user to enable/disable the
PTP clock.
0: Disable
1: Enable.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.8
tnPtpClockDefaultDSConfigRowStatus
The RowStatus of PTP clock entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.9
tnPtpClockDefaultDSConfigLocalPriority
The localPriority value of the PTP clock.
Unsigned32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.10
tnPtpClockDefaultDSConfigMaxStepsRemoved
A clock would not qualify any Announce messages
received where the stepsRemoved field in the
ingress header matched or exceeded the maxStepsRemoved
field.
Unsigned32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.11
tnPtpClockDefaultDSConfigEPRTCSupport
Enable/Disable Enhanced Primary Reference Time Clock.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.12
tnPtpClockDefaultDSConfigSyncUncertainMon
Enable/Disable Synchronization Uncertain Indication
Monitoring.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.13

tnPtpClockDefaultDSInfoTable

table
.1.3.6.1.4.1.7483.2.2.4.9.1.2.2 · 1 row entry · 6 columns
Open in standard view 
This table provides non-configurable information for
an OC/BC PTP clock.  For TC (E2E or P2P), this table
is not available.
tnPtpClockDefaultDSInfoEntry entry .1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1
Information of an OC/BC PTP clock
Indexes
tnPtpClockIndex
Column Syntax OID
tnPtpClockDefaultDSInfoIdentifier
The identifier of the PTP clock.
AluWdmPtpClockIdentifier
Textual Convention: AluWdmPtpClockIdentifier OctetString
Type Constraints:
range: 8
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1.1
tnPtpClockDefaultDSInfoTwoStepFlag
This is an indicator of whether master-slave
synchronization utilizes follow-up messaging (IEEE
1588-2008 Section 8.2.1.2.1.). This parameter is
read-only. A PTP port has a configurable parameter
which determines if f…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1.2
tnPtpClockDefaultDSInfoNumberOfPorts
The number of PTP ports in the PTP clock.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1.3
tnPtpClockDefaultDSInfoClass
The clock class on the PTP clock (IEEE1588-2008
Section 8.2.1.3.1.1).
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1.4
tnPtpClockDefaultDSInfoAccuracy
The accuracy of the PTP clock
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1.5
tnPtpClockDefaultDSInfoOffsetScaledLogVariance
The frequency offset scaled log variance of the
PTP clock (IEEE P1588-2008 Section 7.6.3).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1.6

tnPtpClockCurrentDSTable

table
.1.3.6.1.4.1.7483.2.2.4.9.1.2.3 · 1 row entry · 6 columns
Open in standard view 
This table provides tn PTP Clock current Data
Set for an OC/BC PTP Clock.  For TC (E2E or P2P),
this table is not available.
tnPtpClockCurrentDSEntry entry .1.3.6.1.4.1.7483.2.2.4.9.1.2.3.1
Operational information of a PTP clock.
Indexes
tnPtpClockIndex
Column Syntax OID
tnPtpClockCurrentDSOffSetFromMaster
The current value of the time difference between
a master and a slave as computed by the slave.
The unit is ns (nano-seconds). Refer to Section
8.2.2.3 of IEEE1588-2008.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.3.1.1
tnPtpClockCurrentDSMeanPathDelay
The mean propagation time between a master and
a slave as computed by the slave. The unit is
ns (nano-seconds). Refer to Section 8.2.2.4 of
IEEE1588-2008.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.3.1.2
tnPtpClockCurrentDSCurrentTime
The current time of the PTP clock. ASCII encoded
decimal number in units of seconds with a precision
of 9.
OctetString
Constraints:
range: 81-81
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.3.1.3
tnPtpClockCurrentDSRecoveredClockState
The synchronization state of the PTP clock.
AluWdmPtpRecoveredClockState
Textual Convention: AluWdmPtpRecoveredClockState Enumeration
Type Values:
0unknown
1freeRun
2acquiring
3phasetracking
4holdover
5locked
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.3.1.4
tnPtpClockCurrentDSLockedPtpPort
The number or index of the PTP port where the
PTP clock is locked to. This parameter together
with the tnPtpClockIndex points to a row of the
tnPtpPortDSConfigTable. It is meaningful fo
OC-slave or BC. And for BC, it …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.3.1.5
tnPtpClockCurrentDSStepsRemoved
The number of PTP clocks along the timing
distribution path from the Grandmaster to the
local PTP clock.
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.3.1.6

tnPtpClockParentDSTable

table
.1.3.6.1.4.1.7483.2.2.4.9.1.2.4 · 1 row entry · 11 columns
Open in standard view 
This table provides information of the Parent
Data Set for an OC/BC PTP clock.  For TC (E2E
or P2P), this table is not available.
tnPtpClockParentDSEntry entry .1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1
Parent clock information of an OC/BC clock
Indexes
tnPtpClockIndex
Column Syntax OID
tnPtpClockParentDSIdentifier
Identifier of the parent clock which the local
PTP clock locks to. If a PTP clock locks to an
external ToD input interface, it should be equal
to:
1 - for 1pps/ToD interface #1
2 - for 1pps/ToD interface #2.
AluWdmPtpClockIdentifier
Textual Convention: AluWdmPtpClockIdentifier OctetString
Type Constraints:
range: 8
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.1
tnPtpClockParentDSPortNum
The PTP port number of the parent clock, via
which the local PTP clock is synchronizing to
the parent clock.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.2
tnPtpClockParentDSStats
This is an indicator of whether the stats of
the parent clock are collected by the local PTP
clock.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.3
tnPtpClockParentDSOffsetScaledLogVariance
The frequency offset scaled log variance of the
parent clock (IEEE P1588-2008 Section 7.6.3).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.4
tnPtpClockParentDSPhaseChangeRate
The phase change rate of the parent clock(IEEE
P1588-2008 Section 7.6.3).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.5
tnPtpClockParentDSGrandmasterClockId
The clock identifier of the grandmaster which
the parent clock locks to.
AluWdmPtpClockIdentifier
Textual Convention: AluWdmPtpClockIdentifier OctetString
Type Constraints:
range: 8
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.6
tnPtpClockParentDSGrandmasterClass
The clock class of the grandmaster which the
parent clock locks to.
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.7
tnPtpClockParentDSGrandmasterAccuracy
The accuracy of the grandmaster which the parent
clock locks to.
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.8
tnPtpClockParentDSGrandmasterOffsetScaledLogVariance
The OffsetScaledLogVariance value of the
grandmaster which the parent clock locks to.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.9
tnPtpClockParentDSGrandmasterPriority1
The priority1 value of the grandmaster which
the parent clock locks to.
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.10
tnPtpClockParentDSGrandmasterPriority2
The priority2 value of the grandmaster which
the parent clock locks to.
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.11

tnPtpClockTimePropertiesDSTable

table
.1.3.6.1.4.1.7483.2.2.4.9.1.2.5 · 1 row entry · 9 columns
Open in standard view 
This table provides the information of the Time
Properties Data Set for an OC/BC PTP clock.  For
TC (E2E or P2P), this table is not available.
tnPtpClockTimePropertiesDSEntry entry .1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1
Time properties information of an OC/BC PTP clock.
Indexes
tnPtpClockIndex
Column Syntax OID
tnPtpClockTimePropertiesDSCurrentUtcOffset
The current UTC offset value. Refer to Section
8.2.4.2 of IEEE1588-2008. The unit is seconds.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.1
tnPtpClockTimePropertiesDSCurrentUtcOffsetValid
This parameter indicates whether current UTC
offset is valid or not. Refer to Section
8.2.4.3 of IEEE1588-2008.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.2
tnPtpClockTimePropertiesDSLeap59
This parameter indicates whether the last minute
of the current UTC day contains 59 seconds or
not. Refer to Section 8.2.4.4 of IEEE1588-2008.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.3
tnPtpClockTimePropertiesDSLeap61
This parameter indicates whether the last minute
of the current UTC day contains 61 seconds or
not. Refer to Section 8.2.4.5 of IEEE1588-2008.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.4
tnPtpClockTimePropertiesDSTimeTraceable
This parameter indicates whether the timescale
or the current UTC offset are traceable to a
primary reference or not. Refer to Section
8.2.4.6 of IEEE1588-2008.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.5
tnPtpClockTimePropertiesDSFrequencyTraceable
This parameter indicates whether the frequency
determining the timescale is traceable to a
primary reference or not. Refer to Section
8.2.4.7 of IEEE1588-2008.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.6
tnPtpClockTimePropertiesDSPtpTimescale
This parameter indicates the type of time scale
of the grandmaster clock:
true: PTP timescale
false: ARB timescale

Refer to Section 8.2.4.8 of IEEE1588-2008.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.7
tnPtpClockTimePropertiesDSPtpTimeSource
This parameter indicates the timesource used by
grandmaster clock:
-0x10: ATOMIC_CLOCK
-0x20: GPS
-0x30: TEERESTRIAL_RADIO
-0x40: PTP
-0x50: NTP
-0x60: HAND_SET
-0x90: OTHER
-0xA0: INTERNAL_OSCILLATOR

Ref…
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.8
tnPtpClockTimePropertiesDSSyncUncertainFlag
This parameter indicates if the SynchronizationUncertain
flag of incoming announce message from the parent clock
is TRUE or FALSE. It is valid only when the PTP profile
is itug8275dot1 and the SyncUncertainMon is ENABL…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.9

tnPtpClockPathTraceDSTable

table
.1.3.6.1.4.1.7483.2.2.4.9.1.2.6 · 1 row entry · 2 columns
Open in standard view 
This table provides tn PTP Clock Path Trace Data Set
for a PTP Clock.
tnPtpClockPathTraceDSEntry entry .1.3.6.1.4.1.7483.2.2.4.9.1.2.6.1
Path Trace Data Set of a PTP Clock.
Indexes
tnPtpClockIndex
Column Syntax OID
tnPtpClockPathTraceDSEnable
Enable/Disable the Path Trace mechanism.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.6.1.1
tnPtpClockPathTraceDSList
A list of ClockIdentity values. The length of one
ClockIdentity is 8.
OctetString
Constraints:
range: 0-256
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.6.1.2

tnPtpClockSyncOamTable

table
.1.3.6.1.4.1.7483.2.2.4.9.1.2.7 · 1 row entry · 9 columns
Open in standard view 
This table provides the PTP Clock
Sync OAM attributes.
tnPtpClockSyncOamEntry entry .1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1
PTP Clock Sync OAM attributes.
Indexes
tnPtpClockIndex
Column Syntax OID
tnPtpClockRealtimeTimeOffsetDuration
Duration time(minute) for the PTP Clock
Realtime Time Offset.
Range: 1 to 15 minutes.
MinuteUnsigned32r/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.1
tnPtpClockRealtimeTimeOffsetInterval
Interval time(second) for the PTP Clock
Realtime Time Offset.
Range: 1 to 5 seconds.
SecondUnsigned32r/w
Constraints:
range: 1-5
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.2
tnPtpClockRealtimeTimeOffset1
The PTP Clock Realtime Time Offset part 1.

Every Time Offset value is an Integer32(4-byte).

The maximum size of
tnPtpClockRealtimeTimeOffset1,
tnPtpClockRealtimeTimeOffset2, and
tnPtpClockR…
OctetString
Constraints:
range: 0-1200
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.3
tnPtpClockRealtimeTimeOffset2
The PTP Clock Realtime Time Offset part 2.

Refer to tnPtpClockRealtimeTimeOffset1.
OctetString
Constraints:
range: 0-1200
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.4
tnPtpClockRealtimeTimeOffset3
The PTP Clock Realtime Time Offset part 3.

Refer to tnPtpClockRealtimeTimeOffset1.
OctetString
Constraints:
range: 0-1200
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.5
tnPtpClockSyncLossDetectionInterval
The number of SYNC Interval to raise
PtpClock SYNCLOSS alarm.
Range: 2 to 255.
Unsigned32r/w
Constraints:
range: 2-255
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.6
tnPtpClockDelayRespLossDetectionInterval
The number of DELAY_RESP Interval to raise
PtpClock DELAYRESPLOSS alarm.
Range: 2 to 255.
Unsigned32r/w
Constraints:
range: 2-255
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.7
tnPtpClockPtpInputDegradeThreshold
The Threshold value to raise PtpClock PTPINPUTDEG
alarm.

For IEEE_1588_2008_CCSA profile, valid values are
6, 7, 8, 52, 187.

For G_8275_1 profile, valid values are
6, 7, 135, 140, 150, 160,…
Unsigned32r/w
Constraints:
range: 6-248
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.8
tnPtpClockTimeErrorReferencePortIndex
The Reference Input 1PPS/ToD port index for
the PTP Time Error(PTERREF).
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.9

tnPtpClockGenericTable

table
.1.3.6.1.4.1.7483.2.2.4.9.1.2.8 · 1 row entry · 2 columns
Open in standard view 
This table provides generic information for a PTP clock.
tnPtpClockGenericEntry entry .1.3.6.1.4.1.7483.2.2.4.9.1.2.8.1
Generic information for a PTP clock.
Indexes
tnPtpClockIndex
Column Syntax OID
tnPtpClockMode
This parameter determines the PTP operational mode of
the card. It is intended to be managed by the System
Operator.

0: 1588 function of this card is disabled
1: Ordinary Clock - Slave
2: Ordinary Clo…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.8.1.1
tnPtpClockAlmProfName
ASAP (alarm severity assignment profile) Name for
PTP clock.
OctetStringr/w
Constraints:
range: 1-40
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.8.1.2

tnPtpTransparentClockDefaultDSTable

table
.1.3.6.1.4.1.7483.2.2.4.9.1.2.9 · 1 row entry · 4 columns
Open in standard view 
This table provides the default data set of
Transparent Clock.
          
Refer to 8.3.2 transparentClockDefaultDS
data set member specifications.
tnPtpTransparentClockDefaultDSEntry entry .1.3.6.1.4.1.7483.2.2.4.9.1.2.9.1
Default data set of Transparent Clock.
Indexes
tnPtpClockIndex
Column Syntax OID
tnPtpTransparentClockDefaultDSClockIdentity
The clockIdentity of the Transparent Clock.
AluWdmPtpClockIdentifier
Textual Convention: AluWdmPtpClockIdentifier OctetString
Type Constraints:
range: 8
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.9.1.1
tnPtpTransparentClockDefaultDSNumberPorts
The number of PTPPOTRs of the Transparent Clock.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.9.1.2
tnPtpTransparentClockDefaultDSDelayMechanism
E2E(end-to-end) or P2P(peer-to-peer) Transparent Clock.
Enumerationr/w
Enumerated Values:
1e2e
2p2p
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.9.1.3
tnPtpTransparentClockDefaultDSPrimaryDomain
The domainNumber of the primary
syntonization domain.
Unsigned32r/w
Constraints:
range: 24-43
 .1.3.6.1.4.1.7483.2.2.4.9.1.2.9.1.4

tnPtpPortNextIndexTable

table
.1.3.6.1.4.1.7483.2.2.4.9.1.3.1 · 1 row entry · 1 columns
Open in standard view 
This table provides the next available index
for a PTP port to be created in a PTP clock.
tnPtpPortNextIndexEntry entry .1.3.6.1.4.1.7483.2.2.4.9.1.3.1.1
Next available index for a PTP port to be
created in a PTP clock.
Indexes
tnPtpClockIndex
Column Syntax OID
tnPtpPortNextIndex
This parameter indicates the next available index
for a PTP port to be created in a PTP clock,
which will be used when the user wants to create
a new row in tnPtpPortDSConfigTable.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.1.1.1

tnPtpPortDSConfigTable

table
.1.3.6.1.4.1.7483.2.2.4.9.1.3.2 · 1 row entry · 30 columns
Open in standard view 
This table provides configuration for a PTP port.
tnPtpPortDSConfigEntry entry .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1
Configuration information concerning a PTP port.
Indexes
tnPtpClockIndex tnPtpPortDSPortIndex
Column Syntax OID
tnPtpPortDSPortIndex
The value of tnPtpPortDSPortIndex uniquely
identifies a PTP port in a PTP clock. It equals
to the portNumber used in the PTP message. Refer
to Section 7.5.2.3 of IEEE1588-2008.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.1
tnPtpPortDSConfigAssociatedPhysicalPort
The physical port which this PTP port is
associated to. For the same physical port, it
has the same value as 'ifIndex' of the card's
port table.
IF-MIBInterfaceIndexr/w
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.2
tnPtpPortDSConfigVlanVID
The VLAN-ID of the Vlan tag for the tx/rx PTP
messages. It shall be within the range of
[0,4094], 0 means untagged.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.3
tnPtpPortDSConfigVlanTPID
The TPID of the Vlan tag for the tx/rx PTP
messages. It is valid when
tnPtpPortDSConfigVlanVID is not 0.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.4
tnPtpPortDSConfigAnnoRxTimeout
The administrative value for the number of
timeouts for the announce message associated
with the 1588 PTP reference/port. The total
time in seconds to timeout is calculated by the
tnPtpPortDSAnnoRxTimeout * 2 ^ tnPtpPo…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.5
tnPtpPortDSConfigLogAnnoInterval
The administrative value, which is represented
as logarithm to the base 2 of the transmission
interval for the announce message in this PTP
port.

Valid values: -4, -3, -2, -1, 0, 1, 2, 3, 4.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.6
tnPtpPortDSConfigLogSyncInterval
The administrative value, which is represented
as logarithm to the base 2 of the transmission
interval for the sync message in this PTP port.

Valid values: -7, -6, -5, -4, -3, -2, -1, 0, 1,
…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.7
tnPtpPortDSConfigLogDelayReqInterval
The administrative value, which is represented
as logarithm to the base 2 of the transmission
interval for the delay_req message in this PTP
port.

Valid values: -7, -6, -5, -4, -3, -2, -1, 0, 1,
…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.8
tnPtpPortDSConfigLogMinPDelayReqInterval
The administrative value, which is represented
as logarithm to the base 2 of the transmission
interval for the pdelay_req message in this PTP
port.

Valid values: -7, -6, -5, -4, -3, -2, -1, 0, 1,
…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.9
tnPtpPortDSConfigAdminStatus
It is used for the user to administratively
manage the PTP protocols on the PTP port
0: Disable
1: Enable
2: MT1 (maintenance state 1)
3: MT2 (maintenance state 2).
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.10
tnPtpPortDSConfigRole
It is used for the user to set the role of the
PTP port. It is valid for BC only.
0: Automatic
1: Slave
2: Master
3: Passive.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.11
tnPtpPortDSConfigDelayMechanism
The delay mechanism for the PTP port.
Enumerationr/w
Enumerated Values:
1e2e
2p2p
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.12
tnPtpPortDSConfigVersionNumber
The protocol version to be supported in the PTP
port.
Enumerationr/w
Enumerated Values:
1v1
2v2
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.13
tnPtpPortDSConfigAsymCorrection
It allows the user to specify the correction
delay for asymmetrical network path. Refer to
Section 7.4.2 of IEEE1588-2008.

Value range: {-100ms, +100ms}.

The unit of this attribute shall …
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.14
tnPtpPortDSConfigTwoStepFlag
This parameter determines if follow-up messaging
will be used for this PTP port.

true: If the port will use follow-up messaging
false: If the port will not use follow-up messaging.

Only f…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.15
tnPtpPortDSConfigEncapType
The encapsulation type to transport PTP for the
PTP port:
1: UDP/IPv4 per IEEE1588-2008 Annex D
2: UDP/IPv6 per IEEE1588-2008 Annex D
3: Ethernet per IEEE1588-2008 Annex F.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.16
tnPtpPortDSConfigAddressingMode
Indicates addressing mode of the PTP message in
the PTP port:
- 0: Multicast for all PTP messages
- 1: Unicast for all PTP messages with the
provisioned destination address.
- 2: Hybrid mode. The Delay_Req and Dela…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.17
tnPtpPortDSConfigUnicastForDelayReq deprecated
Indicates how the Delay_Req message is sent in
the PTP port regarding the destination address.
This parameter is valid only when
tnPtpPortAddressingMode is Multicast

true: The port sends the Delay_Req me…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.18
tnPtpPortDSConfigUnicastNegotiation
An administrative value indicating whether the
unicast negotiation function is enabled or
disabled for the PTP port. It is valid when
tnPtpPortAddressingMode is Multicast.

true: Unicast negotiation is e…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.19
tnPtpPortDSConfigDestMac
The unicast destination MAC address for the
transmitted PTP messages of the PTP port. It
will only be applicable when
(tnPtpPortEncapType == 3 ) and
(tnPtpPortAddressingMode == 1).
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.20
tnPtpPortDSConfigDestIpAddrType
The parameter indicates the IP address type for
tnPtpPortDSConfigDestIpAddr.
InetAddressTyper/w
Textual Convention: InetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
16dns
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.21
tnPtpPortDSConfigDestIpAddr
The unicast destination IPv4/IPv6 address for
the transmitted PTP messages of the PTP port.
It will only be applicable when
(tnPtpPortEncapType == 1 or 2) and
(tnPtpPortAddressingMode == 1).
InetAddressr/w
Textual Convention: InetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.22
tnPtpPortDSConfigRowStatus
The RowStatus of the PTP Port entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.23
tnPtpPortDSConfigConnectedPtpioTimingPort
The timing port of the PTPIO card which this PTP
port is connected to. It has the same value as
'ifIndex' of the card's port table. To unconnect
a PTP port from a PTPIO timing port, set this
parameter to 0.
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.24
tnPtpPortDSConfigAutoLinkAsyMeasureTrigger
The action to trigger automatic link asymmetry
measurement.
true - trigger automatic link asymmetry measurement
false - no action.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.25
tnPtpPortDSConfigNotSlave
An administrative value indicating whether the
ptp port can be placed in the SLAVE state.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.26
tnPtpPortDSConfigLocalPriority
The localPriority value of the PTP port.
Unsigned32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.27
tnPtpPortDSConfigAssociatedEntityType
Indicates the Associated Entity Type of the PTP port.

0: N/A, NOT Applicable
1: Physical PORT
2: Service
3: ERP Ring
Unsigned32r/w
Constraints:
range: 0-3
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.28
tnPtpPortDSConfigAssociatedEntityID
Indicates the Associated Entity ID(8-byte) of the PTP
port.

The first 4-byte is shelfId/slotId/0/0.
The last 4-byte is portId or serviceId or ringId
depends on tnPtpPortDSConfigAssociatedEntityType.
OctetStringr/w
Constraints:
range: 8-8
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.29
tnPtpPortDSConfigClearMsgCounter
Clears the Message Counter of the PTP port. The 32-bit
value is defined as below:

+----------+----------------------------+
| 32 11 | 10 1 |
+----------+-------------------------…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.30

tnPtpPortDSInfoTable

table
.1.3.6.1.4.1.7483.2.2.4.9.1.3.3 · 1 row entry · 20 columns
Open in standard view 
This table contains non-configurable information
of a PTP port
tnPtpPortDSInfoEntry entry .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1
Non-configurable information of a PTP port.
Indexes
tnPtpClockIndex tnPtpPortDSPortIndex
Column Syntax OID
tnPtpPortDSInfoPeerPathDelay
It's an estimate of the current one-way
propagation delay on the link attached to the
PTP port. The unit is ns. This attribute is
valid only when tnPtpPortDSConfigDelayMechanism
= p2p.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.1
tnPtpPortDSInfoPortOperState
The state of the PTP port.
AluWdmtnPtpPortState
Textual Convention: AluWdmtnPtpPortState Enumeration
Type Values:
0unknown
1initializing
2faulty
3disabled
4listening
5premaster
6master
7passive
8uncalibrated
9slave
65537masterOriented
65538slaveOriented
65539tcFaulty
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.2
tnPtpPortDSInfoNumOfSessions deprecated
The parameter indicates the number of the active
sessions of the PTP port.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.3
tnPtpPortDSInfoAutoLinkAsyMeasureStatus
The parameter indicates the state of the automatic
measurement trigger.
0 - noTrigger
1 - inProgress
2 - successful
3 - noMsgReceived
4 - noMsgReceivedAfterSwap
5 - oswFailure
6 - unstable timestamps.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.4
tnPtpPortDSInfoMeasuredLinkAsymmetry
The parameter indicates the measured delay
asymmetry of the PTP port. It is valid only
when tnPtpPortDSInfoAutoMeasureStatus = 1.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.5
tnPtpPortDSInfoAnnounceMsgTx
Indicates the number of Announce packets
transmitted to this port.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.6
tnPtpPortDSInfoAnnounceMsgRx
Indicates the number of Announce packets
received from this port.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.7
tnPtpPortDSInfoSyncMsgTx
Indicates the number of Sync packets transmitted
to this port.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.8
tnPtpPortDSInfoSyncMsgRx
Indicates the number of Sync packets received
from this port.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.9
tnPtpPortDSInfoDelayReqMsgTx
Indicates the number of Delay Request packets
transmitted to this port.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.10
tnPtpPortDSInfoDelayReqMsgRx
Indicates the number of Delay request packets
received from this port.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.11
tnPtpPortDSInfoDelayRspMsgTx
Indicates the number of Delay response packets
transmitted to this port.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.12
tnPtpPortDSInfoDelayRspMsgRx
Indicates the number of Delay response packets
received from this port.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.13
tnPtpPortDSInfoSignalingMsgTx
Indicates the number of Signaling packets
transmitted to this port.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.14
tnPtpPortDSInfoSignalingMsgRx
Indicates the number of Signaling packets
received from this port.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.15
tnPtpPortDSInfoManagementMsgTx
Indicates the number of Management packets
transmitted to this port.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.16
tnPtpPortDSInfoManagementMsgRx
Indicates the number of Management packets
received from this port.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.17
tnPtpPortDSInfoFollowUpMsgTx
Indicates the number of FollowUp packets
transmitted to this port.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.18
tnPtpPortDSInfoFollowUpMsgRx
Indicates the number of FollowUp packets
received from this port.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.19
tnPtpPortDSInfoPhyPortMac
The MAC address of the associated physical port.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.20

tnPtpPortGenericTable

table
.1.3.6.1.4.1.7483.2.2.4.9.1.3.5 · 1 row entry · 1 columns
Open in standard view 
This table provides generic information for a PTP port.
tnPtpPortGenericEntry entry .1.3.6.1.4.1.7483.2.2.4.9.1.3.5.1
Generic information for a PTP port.
Indexes
tnPtpClockIndex tnPtpPortDSPortIndex
Column Syntax OID
tnPtpPortAlmProfName
ASAP(alarm severity assignment profile) Name for PTP port.
OctetStringr/w
Constraints:
range: 1-40
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.5.1.1

tnPtpTransparentClockPortDSTable

table
.1.3.6.1.4.1.7483.2.2.4.9.1.3.6 · 1 row entry · 2 columns
Open in standard view 
This table provides the data set of Transparent Clock
PTP port.
          
Refer to 8.3.3 transparentClockPortDS data set member
specifications.
tnPtpTransparentClockPortDSEntry entry .1.3.6.1.4.1.7483.2.2.4.9.1.3.6.1
Data set of the PTP port of Transparent Clock.
Indexes
tnPtpClockIndex tnPtpPortDSPortIndex
Column Syntax OID
tnPtpTransparentClockPortDSPortIdentity
The PortIdentity attribute of the PTP port.
AluWdmPtpPortIdentity
Textual Convention: AluWdmPtpPortIdentity OctetString
Type Constraints:
range: 10
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.6.1.1
tnPtpTransparentClockPortDSFaultyFlag
The value shall be TRUE if the PTP port is faulty and
FALSE if the PTP port is operating normally. The
initialization value shall be FALSE.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7483.2.2.4.9.1.3.6.1.2

tnPtpExtTodIfTable

table
.1.3.6.1.4.1.7483.2.2.4.9.1.4.1 · 1 row entry · 18 columns
Open in standard view 
This table contains parameters of the external
1PPS/ToD interfaces.
tnPtpExtTodIfEntry entry .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1
Attributes of an external 1PPS&ToD interface.
Indexes
tnPtpExtTodIfIndex
Column Syntax OID
tnPtpExtTodIfIndex
The index of the 1pps/ToD interface. It contains
the shelf, slot and port number information and
is equal to the ifIndex of the ifTable.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.1
tnPtpExtTodIfDirection
The direction of the 1PPS&ToD interface.
0: Input (to the node)
1: Output (from the node).
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.2
tnPtpExtTodSignalValid
This parameter enables/disables the ToD signal
of the 1PPS&ToD interface.
true: The ToD signal is enabled.
false: The ToD signal is disabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.3
tnPtpExtTodIfPulseFormat
The format for the 1PPS signal of the 1PPS&ToD
interface.
0: 1 pulse per second
1: 1 pulse per minute
2: 1 pulse per hour.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.4
tnPtpExtTodIfToDFormat
The format for the ToD signal of the 1PPS&ToD
interface
0: UBX
1: IRIG-B
2: IRIG-D
3: ITU-T

This parameter is valid only when
tnPtpExtTodSignalValid is true.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.5
tnPtpExtTodIfCableCorrection
The compensation value of the cable for the
1PPS&ToD interface.

Value range: {-100ms, +100ms}.

The unit of this attribute shall be ns and the
steps of this attribute shall be 1ns.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.6
tnPtpExtTodIfAdminStatus
The Admin status of the 1PPS&ToD interface.
0: Disable
1: Enable.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.7
tnPtpExtTodIf1ppsStatus
The operational status of the 1PPS signal of the
1PPS&ToD interface.
1: Normal
2: Loss.

This parameter is valid only when
tnPtpExtTodIfDirection is input.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.8
tnPtpExtTodIfToDStatus
The operational status of the ToD signal of the
1PPS&ToD interface.
1: Normal
2: Degraded
3: Do Not used (default)
4: Loss
256: N/A - NotApplicable.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.9
tnPtpExtTodIfAdditionalInfo
The additional information for the 1PPS&ToD
interface.
OctetString
Constraints:
range: 0-48
 .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.10
tnPtpExtCompensationMode
This parameter determines the PTP Compensation
mode. It is intended to be managed by the
System Operator.
0: precalibrated mode
1: auto mode
2: manual mode
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.11
tnPtpExtCompenAutoTestTrigger
This parameter enables/disables Compensation AutoTest
true: enabled Compensation AutoTest.
false: disabled Compensation AutoTest.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.12
tnPtpExtCompenManualValueIn
The compensation manual value in for the
1PPS&ToD interface.
Value range: {-127ns, +127ns}.
The unit of this attribute shall be ns.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.13
tnPtpExtCompenManualValueOut
The compensation manual value out for the
1PPS&ToD interface.
Value range: {-127ns, +127ns}.

The unit of this attribute shall be ns.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.14
tnPtpExtCompenMeasureStatus
This parameter indicate the the status of automatical
calibration measurement
0: noTrigger
1: inProgress
2: successful
2: failed.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.15
tnPtpExtTodIfDegradeThreshold
The Threshold value to raise ToD Degrade(TODDEG).

For IEEE_1588_2008_CCSA profile,
Range: 0 to 5;
Default: 0.

For G_8275_1 profile,
valid values are 6, 7, 135, 140, 150, 160, 165, 248;
Defa…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.16
tnPtpExtTodIfTodClockClass
The ClockClass of the ToD signal with itu ToD message
format type.

Valid values are:
0..255: ClockClass
256: N/A - NotApplicable.
Unsigned32
Constraints:
range: 0-256
 .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.17
tnPtpExtTodAlmProfName
.
OctetStringr/w
Constraints:
range: 1-40
 .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.18