tnPtpExtTodIfToDStatus
TROPIC-PTP-MIB ·
.1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.9
Object
column
SNMPv2-SMIUnsigned32
The operational status of the ToD signal of the 1PPS&ToD interface. 1: Normal 2: Degraded 3: Do Not used (default) 4: Loss 256: N/A - NotApplicable.
Context
- MIB
- TROPIC-PTP-MIB
- OID
.1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.9- Type
- column
- Access
- readonly
- Status
- current
- Parent
- tnPtpExtTodIfEntry
- Table
- tnPtpExtTodIfTable
- Siblings
- 17
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tnPtpExtTodIfIndex The index of the 1pps/ToD interface. It contains
the shelf, slot and port number information and
is equal to the ifIndex of the ifTable. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.1 |
| tnPtpExtTodIfAdditionalInfo The additional information for the 1PPS&ToD
interface. | column | OctetString | .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.10 |
| tnPtpExtCompensationMode This parameter determines the PTP Compensation
mode. It is intended to be managed by the
System Operator.
0: precalibrated mode
1: auto mode
2: manual mode | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.11 |
| tnPtpExtCompenAutoTestTrigger This parameter enables/disables Compensation AutoTest
true: enabled Compensation AutoTest.
false: disabled Compensation AutoTest. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.12 |
| tnPtpExtCompenManualValueIn The compensation manual value in for the
1PPS&ToD interface.
Value range: {-127ns, +127ns}.
The unit of this attribute shall be ns. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.13 |
| tnPtpExtCompenManualValueOut The compensation manual value out for the
1PPS&ToD interface.
Value range: {-127ns, +127ns}.
The unit of this attribute shall be ns. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.14 |
| tnPtpExtCompenMeasureStatus This parameter indicate the the status of automatical
calibration measurement
0: noTrigger
1: inProgress
2: successful
2: failed. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.15 |
| tnPtpExtTodIfDegradeThreshold The Threshold value to raise ToD Degrade(TODDEG).
For IEEE_1588_2008_CCSA profile,
Range: 0 to 5;
Default: 0.
For G_8275_1 profile,
valid values are … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.16 |
| tnPtpExtTodIfTodClockClass The ClockClass of the ToD signal with itu ToD message
format type.
Valid values are:
0..255: ClockClass
256: N/A - NotApplicable. | column | Unsigned32 | .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.17 |
| tnPtpExtTodAlmProfName . | column | OctetString | .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.18 |
| tnPtpExtTodIfDirection The direction of the 1PPS&ToD interface.
0: Input (to the node)
1: Output (from the node). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.2 |
| tnPtpExtTodSignalValid This parameter enables/disables the ToD signal
of the 1PPS&ToD interface.
true: The ToD signal is enabled.
false: The ToD signal is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.3 |
| tnPtpExtTodIfPulseFormat The format for the 1PPS signal of the 1PPS&ToD
interface.
0: 1 pulse per second
1: 1 pulse per minute
2: 1 pulse per hour. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.4 |
| tnPtpExtTodIfToDFormat The format for the ToD signal of the 1PPS&ToD
interface
0: UBX
1: IRIG-B
2: IRIG-D
3: ITU-T
This parameter is valid only when
tnPtpExtTodSignalValid is true. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.5 |
| tnPtpExtTodIfCableCorrection The compensation value of the cable for the
1PPS&ToD interface.
Value range: {-100ms, +100ms}.
The unit of this attribute shall be ns and the
steps … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.6 |
| tnPtpExtTodIfAdminStatus The Admin status of the 1PPS&ToD interface.
0: Disable
1: Enable. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.7 |
| tnPtpExtTodIf1ppsStatus The operational status of the 1PPS signal of the
1PPS&ToD interface.
1: Normal
2: Loss.
This parameter is valid only when
tnPtpExtTodIfDirection is input. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.8 |