tnPtpPortDSConfigNotSlave
TROPIC-PTP-MIB ·
.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.26
Object
An administrative value indicating whether the ptp port can be placed in the SLAVE state.
Context
- MIB
- TROPIC-PTP-MIB
- OID
.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.26- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tnPtpPortDSConfigEntry
- Table
- tnPtpPortDSConfigTable
- Siblings
- 29
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tnPtpPortDSPortIndex The value of tnPtpPortDSPortIndex uniquely
identifies a PTP port in a PTP clock. It equals
to the portNumber used in the PTP message. Refer
to Section 7.5.2.3 of IEEE1588-2008. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.1 |
| tnPtpPortDSConfigAdminStatus It is used for the user to administratively
manage the PTP protocols on the PTP port
0: Disable
1: Enable
2: MT1 (maintenance state 1)
3: MT2 (maintenance state 2). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.10 |
| tnPtpPortDSConfigRole It is used for the user to set the role of the
PTP port. It is valid for BC only.
0: Automatic
1: Slave
2: Master
3: Passive. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.11 |
| tnPtpPortDSConfigDelayMechanism The delay mechanism for the PTP port. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.12 |
| tnPtpPortDSConfigVersionNumber The protocol version to be supported in the PTP
port. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.13 |
| tnPtpPortDSConfigAsymCorrection It allows the user to specify the correction
delay for asymmetrical network path. Refer to
Section 7.4.2 of IEEE1588-2008.
Value range: {-100ms, +100ms}.
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.14 |
| tnPtpPortDSConfigTwoStepFlag This parameter determines if follow-up messaging
will be used for this PTP port.
true: If the port will use follow-up messaging
false: If the port will not use fo… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.15 |
| tnPtpPortDSConfigEncapType The encapsulation type to transport PTP for the
PTP port:
1: UDP/IPv4 per IEEE1588-2008 Annex D
2: UDP/IPv6 per IEEE1588-2008 Annex D
3: Ethernet per IEEE1588-2008 Annex F. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.16 |
| tnPtpPortDSConfigAddressingMode Indicates addressing mode of the PTP message in
the PTP port:
- 0: Multicast for all PTP messages
- 1: Unicast for all PTP messages with the
provisioned destination address.
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.17 |
| tnPtpPortDSConfigUnicastForDelayReq deprecated Indicates how the Delay_Req message is sent in
the PTP port regarding the destination address.
This parameter is valid only when
tnPtpPortAddressingMode is Multicast
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.18 |
| tnPtpPortDSConfigUnicastNegotiation An administrative value indicating whether the
unicast negotiation function is enabled or
disabled for the PTP port. It is valid when
tnPtpPortAddressingMode is Multicast.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.19 |
| tnPtpPortDSConfigAssociatedPhysicalPort The physical port which this PTP port is
associated to. For the same physical port, it
has the same value as 'ifIndex' of the card's
port table. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.2 |
| tnPtpPortDSConfigDestMac The unicast destination MAC address for the
transmitted PTP messages of the PTP port. It
will only be applicable when
(tnPtpPortEncapType == 3 ) and
(tnPtpPortAddressingMode == 1… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.20 |
| tnPtpPortDSConfigDestIpAddrType The parameter indicates the IP address type for
tnPtpPortDSConfigDestIpAddr. | column | InetAddressType | .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.21 |
| tnPtpPortDSConfigDestIpAddr The unicast destination IPv4/IPv6 address for
the transmitted PTP messages of the PTP port.
It will only be applicable when
(tnPtpPortEncapType == 1 or 2) and
(tnPtpPortAddressin… | column | InetAddress | .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.22 |
| tnPtpPortDSConfigRowStatus The RowStatus of the PTP Port entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.23 |
| tnPtpPortDSConfigConnectedPtpioTimingPort The timing port of the PTPIO card which this PTP
port is connected to. It has the same value as
'ifIndex' of the card's port table. To unconnect
a PTP port from a PTPIO timing p… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.24 |
| tnPtpPortDSConfigAutoLinkAsyMeasureTrigger The action to trigger automatic link asymmetry
measurement.
true - trigger automatic link asymmetry measurement
false - no action. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.25 |
| tnPtpPortDSConfigLocalPriority The localPriority value of the PTP port. | column | Unsigned32 | .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.27 |
| tnPtpPortDSConfigAssociatedEntityType Indicates the Associated Entity Type of the PTP port.
0: N/A, NOT Applicable
1: Physical PORT
2: Service
3: ERP Ring | column | Unsigned32 | .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.28 |
| tnPtpPortDSConfigAssociatedEntityID Indicates the Associated Entity ID(8-byte) of the PTP
port.
The first 4-byte is shelfId/slotId/0/0.
The last 4-byte is portId or serviceId or ringId
depends on tnPt… | column | OctetString | .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.29 |
| tnPtpPortDSConfigVlanVID The VLAN-ID of the Vlan tag for the tx/rx PTP
messages. It shall be within the range of
[0,4094], 0 means untagged. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.3 |
| tnPtpPortDSConfigClearMsgCounter Clears the Message Counter of the PTP port. The 32-bit
value is defined as below:
+----------+----------------------------+
| 32 11 | 10 1… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.30 |
| tnPtpPortDSConfigVlanTPID The TPID of the Vlan tag for the tx/rx PTP
messages. It is valid when
tnPtpPortDSConfigVlanVID is not 0. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.4 |
| tnPtpPortDSConfigAnnoRxTimeout The administrative value for the number of
timeouts for the announce message associated
with the 1588 PTP reference/port. The total
time in seconds to timeout is calculated by th… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.5 |
| tnPtpPortDSConfigLogAnnoInterval The administrative value, which is represented
as logarithm to the base 2 of the transmission
interval for the announce message in this PTP
port.
Valid values: -4, … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.6 |
| tnPtpPortDSConfigLogSyncInterval The administrative value, which is represented
as logarithm to the base 2 of the transmission
interval for the sync message in this PTP port.
Valid values: -7, -6, … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.7 |
| tnPtpPortDSConfigLogDelayReqInterval The administrative value, which is represented
as logarithm to the base 2 of the transmission
interval for the delay_req message in this PTP
port.
Valid values: -7,… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.8 |
| tnPtpPortDSConfigLogMinPDelayReqInterval The administrative value, which is represented
as logarithm to the base 2 of the transmission
interval for the pdelay_req message in this PTP
port.
Valid values: -7… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.9 |