tnPtpPortDSConfigConnectedPtpioTimingPort

TROPIC-PTP-MIB · .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.24

Object

column r/w IF-MIBInterfaceIndexOrZero

The timing port of the PTPIO card which this PTP
port is connected to.  It has the same value as
'ifIndex' of the card's port table.  To unconnect
a PTP port from a PTPIO timing port, set this
parameter to 0.

Context

MIB: TROPIC-PTP-MIB
OID: .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.24
Type: column
Access: readwrite
Status: current
Parent: tnPtpPortDSConfigEntry
Table: tnPtpPortDSConfigTable
Siblings: 29

Syntax

IF-MIBInterfaceIndexOrZero

Source: IF-MIBInterfaceIndexOrZero
Base type: Integer32

Values & Constraints

Type Constraints

range: 0..2147483647

Related Objects

Sibling Objects

Object	Type	Syntax	OID
tnPtpPortDSPortIndex The value of tnPtpPortDSPortIndex uniquely identifies a PTP port in a PTP clock. It equals to the portNumber used in the PTP message. Refer to Section 7.5.2.3 of IEEE1588-2008.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.1`
tnPtpPortDSConfigAdminStatus It is used for the user to administratively manage the PTP protocols on the PTP port 0: Disable 1: Enable 2: MT1 (maintenance state 1) 3: MT2 (maintenance state 2).	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.10`
tnPtpPortDSConfigRole It is used for the user to set the role of the PTP port. It is valid for BC only. 0: Automatic 1: Slave 2: Master 3: Passive.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.11`
tnPtpPortDSConfigDelayMechanism The delay mechanism for the PTP port.	column	Enumeration	`.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.12`
tnPtpPortDSConfigVersionNumber The protocol version to be supported in the PTP port.	column	Enumeration	`.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.13`
tnPtpPortDSConfigAsymCorrection It allows the user to specify the correction delay for asymmetrical network path. Refer to Section 7.4.2 of IEEE1588-2008. Value range: {-100ms, +100ms}. …	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.14`
tnPtpPortDSConfigTwoStepFlag This parameter determines if follow-up messaging will be used for this PTP port. true: If the port will use follow-up messaging false: If the port will not use fo…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.15`
tnPtpPortDSConfigEncapType The encapsulation type to transport PTP for the PTP port: 1: UDP/IPv4 per IEEE1588-2008 Annex D 2: UDP/IPv6 per IEEE1588-2008 Annex D 3: Ethernet per IEEE1588-2008 Annex F.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.16`
tnPtpPortDSConfigAddressingMode Indicates addressing mode of the PTP message in the PTP port: - 0: Multicast for all PTP messages - 1: Unicast for all PTP messages with the provisioned destination address. …	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.17`
tnPtpPortDSConfigUnicastForDelayReq deprecated Indicates how the Delay_Req message is sent in the PTP port regarding the destination address. This parameter is valid only when tnPtpPortAddressingMode is Multicast …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.18`
tnPtpPortDSConfigUnicastNegotiation An administrative value indicating whether the unicast negotiation function is enabled or disabled for the PTP port. It is valid when tnPtpPortAddressingMode is Multicast. …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.19`
tnPtpPortDSConfigAssociatedPhysicalPort The physical port which this PTP port is associated to. For the same physical port, it has the same value as 'ifIndex' of the card's port table.	column	IF-MIBInterfaceIndex	`.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.2`
tnPtpPortDSConfigDestMac The unicast destination MAC address for the transmitted PTP messages of the PTP port. It will only be applicable when (tnPtpPortEncapType == 3 ) and (tnPtpPortAddressingMode == 1…	column	SNMPv2-TCMacAddress	`.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.20`
tnPtpPortDSConfigDestIpAddrType The parameter indicates the IP address type for tnPtpPortDSConfigDestIpAddr.	column	InetAddressType	`.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.21`
tnPtpPortDSConfigDestIpAddr The unicast destination IPv4/IPv6 address for the transmitted PTP messages of the PTP port. It will only be applicable when (tnPtpPortEncapType == 1 or 2) and (tnPtpPortAddressin…	column	InetAddress	`.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.22`
tnPtpPortDSConfigRowStatus The RowStatus of the PTP Port entry.	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.23`
tnPtpPortDSConfigAutoLinkAsyMeasureTrigger The action to trigger automatic link asymmetry measurement. true - trigger automatic link asymmetry measurement false - no action.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.25`
tnPtpPortDSConfigNotSlave An administrative value indicating whether the ptp port can be placed in the SLAVE state.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.26`
tnPtpPortDSConfigLocalPriority The localPriority value of the PTP port.	column	Unsigned32	`.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.27`
tnPtpPortDSConfigAssociatedEntityType Indicates the Associated Entity Type of the PTP port. 0: N/A, NOT Applicable 1: Physical PORT 2: Service 3: ERP Ring	column	Unsigned32	`.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.28`
tnPtpPortDSConfigAssociatedEntityID Indicates the Associated Entity ID(8-byte) of the PTP port. The first 4-byte is shelfId/slotId/0/0. The last 4-byte is portId or serviceId or ringId depends on tnPt…	column	OctetString	`.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.29`
tnPtpPortDSConfigVlanVID The VLAN-ID of the Vlan tag for the tx/rx PTP messages. It shall be within the range of [0,4094], 0 means untagged.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.3`
tnPtpPortDSConfigClearMsgCounter Clears the Message Counter of the PTP port. The 32-bit value is defined as below: +----------+----------------------------+ \| 32 11 \| 10 1…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.30`
tnPtpPortDSConfigVlanTPID The TPID of the Vlan tag for the tx/rx PTP messages. It is valid when tnPtpPortDSConfigVlanVID is not 0.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.4`
tnPtpPortDSConfigAnnoRxTimeout The administrative value for the number of timeouts for the announce message associated with the 1588 PTP reference/port. The total time in seconds to timeout is calculated by th…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.5`
tnPtpPortDSConfigLogAnnoInterval The administrative value, which is represented as logarithm to the base 2 of the transmission interval for the announce message in this PTP port. Valid values: -4, …	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.6`
tnPtpPortDSConfigLogSyncInterval The administrative value, which is represented as logarithm to the base 2 of the transmission interval for the sync message in this PTP port. Valid values: -7, -6, …	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.7`
tnPtpPortDSConfigLogDelayReqInterval The administrative value, which is represented as logarithm to the base 2 of the transmission interval for the delay_req message in this PTP port. Valid values: -7,…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.8`
tnPtpPortDSConfigLogMinPDelayReqInterval The administrative value, which is represented as logarithm to the base 2 of the transmission interval for the pdelay_req message in this PTP port. Valid values: -7…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.9`