SUPERMICRO-MIRSTP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
4
Rows
4
Columns
69
.1.3.6.1.4.1.10876.101.1.119.1.3 · 1 row entry · 25 columns
List of per virtual context RstModule Parameters
fsMIDot1wFutureRstEntry entry .1.3.6.1.4.1.10876.101.1.119.1.3.1
Virtual Bridge RstModule Parameters.
Indexes
fsMIDot1wFutureRstContextId
Column Syntax OID
fsMIDot1wFutureRstContextId
Identifies the Virtual Bridge Context.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.10876.101.1.119.1.3.1.1
fsMIRstSystemControl
The administrative system control status requested by management for
the RSTP feature. The value 'start'(1) indicates that all resources
required by RSTP should be allocated and RSTP should be supported
in the device …
Enumerationr/w
Enumerated Values:
1start
2shutdown
.1.3.6.1.4.1.10876.101.1.119.1.3.1.2
fsMIRstModuleStatus
The administrative module status requested by management for the RSTP
Module. This enables or disables RSTP in the system. A value of 'enabled'
(1) indicates that RSTP must be enabled in the device on all the ports.
A v…
EnabledStatusr/w
Textual Convention: EnabledStatus Enumeration
Type Values:
1enabled
2disabled
.1.3.6.1.4.1.10876.101.1.119.1.3.1.3
fsMIRstTraceOption
This object is used to enable Trace Statements in the RSTP
Module.

A FOUR BYTE integer is used for enabling the level of tracing.
Each BIT in the four byte integer, represents a particular
level of Trac…
Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.10876.101.1.119.1.3.1.4
fsMIRstDebugOption
This object is used to enable Debug Statements in the RSTP
Module.

A FOUR BYTE integer is used for enabling the level of debugging.
Each BIT in the four byte integer, represents a particular
level of De…
Integer32r/w
Constraints:
range: 0-524287
.1.3.6.1.4.1.10876.101.1.119.1.3.1.5
fsMIRstRstpUpCount
The number of times RSTP Module has been enabled.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.119.1.3.1.6
fsMIRstRstpDownCount
The number of times RSTP Module has been disabled.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.119.1.3.1.7
fsMIRstBufferFailureCount
The number of times buffer overflows/failures have occurred.
A Trap is generated on the occurrence of this event.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.119.1.3.1.8
fsMIRstMemAllocFailureCount
The number of times memory allocation failures have occurred.
A Trap is generated on the occurrence of this event.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.119.1.3.1.9
fsMIRstNewRootIdCount
The number of times this Bridge has detected a new Root in the topology.
A Trap is generated on the occurrence of this event.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.119.1.3.1.10
fsMIRstPortRoleSelSmState
This indicates the current state of the Port Role Selection State
Machine. This object will hold the value 'initbridge' when the
Port Role Selection state machine is in the INIT_BRIDGE state and
the value of 'rolesel…
Enumeration
Enumerated Values:
0initbridge
1roleselection
.1.3.6.1.4.1.10876.101.1.119.1.3.1.11
fsMIRstOldDesignatedRoot
The bridge identifier of the old root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node.
SUPERMICRO-MIStdBRIDGE-MIBBridgeId
Textual Convention: SUPERMICRO-MIStdBRIDGE-MIBBridgeId OctetString
Type Constraints:
range: 8
.1.3.6.1.4.1.10876.101.1.119.1.3.1.12
fsMIRstDynamicPathcostCalculation
This object is used to determine whether dynamic pathcost
calculation is allowed or not.The value is determined by
management. If set to true, pathcost is calculated dynamically
from port speed(when the operational st…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.10876.101.1.119.1.3.1.13
fsMIRstContextName
This object is used to identity the context-name.
OctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.10876.101.1.119.1.3.1.14
fsMIRstCalcPortPathCostOnSpeedChg
This object is used to determine whether dynamic pathcost
calculation is done for a port for which Port Speed is changing
dynamically. This is mainly intended for Link Aggregated ports where
depening on Active ports spe…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.10876.101.1.119.1.3.1.15
fsMIRstClearBridgeStats
This object is used to clear the statistical counters.When this
object is set to TRUE,it resets the bridge specific counters
and all the interface associated counters to zero.After resetting
the counters the object…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.10876.101.1.119.1.3.1.16
fsMIRstRcvdEvent
This object gives information about the recently received event in the system.
Currently we support only ConfigurationEvent.
Enumeration
Enumerated Values:
1configurationEvent
2bpduEvent
3timerExpiryEvent
.1.3.6.1.4.1.10876.101.1.119.1.3.1.17
fsMIRstRcvdEventSubType
This object gives information about sub-type of the event received in the system
recently. The value of this object depends on the value of the object fsRstRcvdEvent.
For ConfigurationEvent, the sub-types supported are…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.10876.101.1.119.1.3.1.18
fsMIRstRcvdEventTimeStamp
The time stamp (in milli seconds) at which event specified by the object fsRstRcvdEvent
was received in the system at STP module for the last time. This object is introduced to measure the
convergence time in RSTP modu…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.119.1.3.1.19
fsMIRstRcvdPortStateChangeTimeStamp
The time stamp (in milli seconds) at which port state has been changed in
the system. This object is introduced to measure the convergence time in RSTP module.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.119.1.3.1.20
fsMIRstFlushInterval
This time value, measured in units of hundredths
of a second, controls the number of flush indications
invoked from RSTP module.

If set to zero, then normal port based flushing will take place
in RSTP (…
centi-secondsInteger32r/w
Constraints:
range: 0-500
.1.3.6.1.4.1.10876.101.1.119.1.3.1.21
fsMIRstFlushIndicationThreshold
This indicates the number of flush indications to go before
timer method triggers. (i.e) The number of flush indications
to trigger the FlushInterval Timer.

This value can be configurable only when…
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.10876.101.1.119.1.3.1.22
fsMIRstTotalFlushCount
The number of times flush is being triggered from
the STP stack in case of RSTP mode.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.119.1.3.1.23
fsMIRstFwdDelayAltPortRoleTrOptimization
When ROLE_TRANSLATION takes place from ALTERNATE to DESIGNATED, the value with which
fdWhile timer started is controlled by this object configuration.
1. As per the standard IEEE 802.1Q 2005, which talks about MSTP im…
EnabledStatusr/w
Textual Convention: EnabledStatus Enumeration
Type Values:
1enabled
2disabled
.1.3.6.1.4.1.10876.101.1.119.1.3.1.24
fsMIRstBpduGuard
This object configures BPDU guard globally in RSTP
and this global BPDU is applicable if and only if no Port specific
BpduGuard is configured.
Enable - enables BPDU Guard feature on edge ports globally and
moves the …
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.10876.101.1.119.1.3.1.25
.1.3.6.1.4.1.10876.101.1.119.1.4 · 1 row entry · 36 columns
This is a table that is an extension to the dot1dStpExtPortTable.
This contains object(s) that are Port-based.
fsMIRstPortExtEntry entry .1.3.6.1.4.1.10876.101.1.119.1.4.1
Each entry in this table is for each port present in the system.
This table is indexed by the fsMIRstPort.
Indexes
fsMIRstPort
Column Syntax OID
fsMIRstPort
A unique value, greater than zero, indicating the Port number.
Integer32
Constraints:
range: 1-4096
.1.3.6.1.4.1.10876.101.1.119.1.4.1.1
fsMIRstPortRole
This indicates the current Port Role assumed by this Port.
Enumeration
Enumerated Values:
0disabledPort
1alternatePort
2backupPort
3rootPort
4designatedPort
.1.3.6.1.4.1.10876.101.1.119.1.4.1.2
fsMIRstPortOperVersion
This indicates whether the Port is operationally in the Rstp
mode or the Stp-compatible mode i.e., whether the Port is
transmitting RST BPDUs or Config/TCN BPDUs.
Enumeration
Enumerated Values:
0stpCompatible
2rstp
.1.3.6.1.4.1.10876.101.1.119.1.4.1.3
fsMIRstPortInfoSmState
This indicates the current state of the Port Information state
machine. This object will hold the value 'disabled' when the
Port Information state machine is in the DISABLED state, the value
'aged' when the state mac…
Enumeration
Enumerated Values:
0disabled
1aged
2update
3superior
4repeat
5notdesignated
6present
7receive
8inferiordesignated
.1.3.6.1.4.1.10876.101.1.119.1.4.1.4
fsMIRstPortMigSmState
This indicates the current state of the Port Protocol Migration state
machine. This object will hold the value 'checkingrstp' when the
Protocol Migration state machine is in the CHECKING_RSTP state,
the value 'select…
Enumeration
Enumerated Values:
0checkingrstp
1selectingstp
2sensing
.1.3.6.1.4.1.10876.101.1.119.1.4.1.5
fsMIRstPortRoleTransSmState
This indicates the current state of the Port Role Transition state
machine. This object will hold the value 'init' when the Port Role
Transition state machine is in the INIT state, the value 'disableport'
when the sta…
Enumeration
Enumerated Values:
0init
1disableport
2disabledport
3rootport
4designatedport
5backupport
6rootproposed
7rootagreed
8reroot
9rootforward
10rootlearn
11rerooted
12designatedpropose
13designatedsynced
14designatedretired
15designatedforward
16designatedlearn
17designatedlisten
.1.3.6.1.4.1.10876.101.1.119.1.4.1.6
fsMIRstPortStateTransSmState
This indicates the current state of the Port State Transition state
machine. This object will hold the value 'discarding' when the Port
State Transition state machine is in the DISCARDING state, the value
'learning' …
Enumeration
Enumerated Values:
0discarding
1learning
2forwarding
.1.3.6.1.4.1.10876.101.1.119.1.4.1.7
fsMIRstPortTopoChSmState
This indicates the current state of the Topology Change state machine.
This object will hold the value 'inactive' when the Topology Change
state machine is in the INACTIVE state, the value 'learning' when the
state ma…
Enumeration
Enumerated Values:
0inactive
1learning
2detected
3active
4notifiedtcn
5notifiedtc
6propagating
7acknowledged
.1.3.6.1.4.1.10876.101.1.119.1.4.1.8
fsMIRstPortTxSmState
This indicates the current state of the Port Transmit state machine.
This object will hold the value 'transmitinit' when the Port Transmit
state machine is in the TRANSMIT_INIT state, the value
'transmitperiodic' when…
Enumeration
Enumerated Values:
0transmitinit
1transmitperiodic
2transmitconfig
3transmittcn
4transmitrstp
5idle
.1.3.6.1.4.1.10876.101.1.119.1.4.1.9
fsMIRstPortRxRstBpduCount
The number of RST BPDUs that have been received on this Port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.119.1.4.1.10
fsMIRstPortRxConfigBpduCount
The number of Config BPDUs that have been received on this Port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.119.1.4.1.11
fsMIRstPortRxTcnBpduCount
The number of TCN BPDUs that have been received on this Port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.119.1.4.1.12
fsMIRstPortTxRstBpduCount
The number of RST BPDUs that have been transmitted by this Port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.119.1.4.1.13
fsMIRstPortTxConfigBpduCount
The number of Config BPDUs that have been transmitted by this Port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.119.1.4.1.14
fsMIRstPortTxTcnBpduCount
The number of TCN BPDUs that have been transmitted by this Port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.119.1.4.1.15
fsMIRstPortInvalidRstBpduRxCount
The number of invalid RSTP BPDUs that have been received on this Port.
A Trap is generated on the occurrence of this event.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.119.1.4.1.16
fsMIRstPortInvalidConfigBpduRxCount
The number of invalid Configuration BPDUs that have been received on
this Port. A Trap is generated on the occurrence of this event.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.119.1.4.1.17
fsMIRstPortInvalidTcnBpduRxCount
The number of invalid TCN BPDUs that have been received on this Port.
A Trap is generated on the occurrence of this event.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.119.1.4.1.18
fsMIRstPortProtocolMigrationCount
The number of times this Port has migrated from one STP protocol
version to another. The relevant protocols are STP-COMPATIBLE and RSTP.
A Trap is generated on the occurrence of this event.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.119.1.4.1.19
fsMIRstPortEffectivePortState
The effective Operational state of the port. This object will be
set to TRUE only when the port is operationally up in the
interface manager and the force Port State for this port and
specified port state is enabled…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.10876.101.1.119.1.4.1.20
fsMIRstPortAutoEdge
This parameter when TRUE(1) indicates that detection of a port
as Edge Port happens automatically and FALSE(2)
indicates that this feature is disabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.10876.101.1.119.1.4.1.21
fsMIRstPortRestrictedRole
A Boolean value set by management. If TRUE causes the Port not
to be selected as Root Port for the CIST or any MSTI, even it has
the best spanning tree priority vector. Such a Port will be selected
as an Alternate Po…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.10876.101.1.119.1.4.1.22
fsMIRstPortRestrictedTCN
A Boolean value set by management. If TRUE causes the Port not
to propagate received topology change notifications and topology
changes to other Ports. This parameter should be FALSE by default.
If set it can cause t…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.10876.101.1.119.1.4.1.23
fsMIRstPortEnableBPDURx
A Boolean value set by management. If FALSE, the BPDUs received on
the port are ignored.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.10876.101.1.119.1.4.1.24
fsMIRstPortEnableBPDUTx
A Boolean value set by management. If FALSE, no BPDUs are transmitted
by this port. This variable should be FALSE before configuring port
as a Layer Two Gateway Port.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.10876.101.1.119.1.4.1.25
fsMIRstPortPseudoRootId
In RSTP Bridge, the fsMIRstPortPseudoRootId parameter value.
By default, it is set to the BridgeIdentifier.
The pseudoRootId is used by Layer Two Gateway Port as the RootId
in generated BPDUs.
SUPERMICRO-MIStdBRIDGE-MIBBridgeIdr/w
Textual Convention: SUPERMICRO-MIStdBRIDGE-MIBBridgeId OctetString
Type Constraints:
range: 8
.1.3.6.1.4.1.10876.101.1.119.1.4.1.26
fsMIRstPortIsL2Gp
A Boolean value set by management. If TRUE, then port is functioning
as a Layer Two Gateway Port. The fsMIRstPortEnableBPDUTx should be
FALSE to set fsMIRstPortIsL2Gp to TRUE.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.10876.101.1.119.1.4.1.27
fsMIRstPortLoopGuard
A Boolean value set by management. If TRUE, then it will not age out
the information even if the peer does not send information. If the port
continues to receive information through BPDUs the operation
on this port will…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.10876.101.1.119.1.4.1.28
fsMIRstPortClearStats
This object is used to clear the statistical counters.When this
object is set to TRUE,it resets the given interface counters to
zero.After resetting the counters the object is set to FALSE
again.Configuration of this M…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.10876.101.1.119.1.4.1.29
fsMIRstPortRcvdEvent
This object gives information about the recently received event in the system.
Currently we support only ConfigurationEvent.
Enumeration
Enumerated Values:
1configurationEvent
2bpduEvent
3timerExpiryEvent
.1.3.6.1.4.1.10876.101.1.119.1.4.1.30
fsMIRstPortRcvdEventSubType
This object gives information about sub-type of the event received in the system
recently. The value of this object depends on the value of the object fsRstPortRcvdEvent.
For ConfigurationEvent, the sub-types supported…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.10876.101.1.119.1.4.1.31
fsMIRstPortRcvdEventTimeStamp
This object gives the time stamp (in milli seconds) at which the event specified by the object
fsRstPortRcvdEvent was received in the system. This object was introduced to measure the
convergence time in RSTP module.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.119.1.4.1.32
fsMIRstPortStateChangeTimeStamp
This object gives the time stamp (in milli seconds) when the port state is
updated to forwarding path for any instance on this port. This object is introduced
to measure the convergence time in RSTP module.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.119.1.4.1.33
fsMIRstPortRowStatus
This object is used to create or delete interfaces at RSTP module
level.Ports can be created at RSTP module level only for ports that
have been created in Interface manager and mapped to a context .
This is applicable o…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.10876.101.1.119.1.4.1.34
fsMIRstLoopInconsistentState
A Boolean value set when the non-designated port on expiry of received information while timer
transitions to Designated/Discarding state when the superior BPDU's are not received with the
loop guard feature being ena…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.10876.101.1.119.1.4.1.35
fsMIRstPortBpduGuard
This configures the BPDU guard feature on this port and has higher priority over Global BPDU Guard.
Enable - prevents temporary loops and applicable to ports and
moves the port to disabled discarding state when BPDU is…
Enumerationr/w
Enumerated Values:
0none
1enable
2disable
.1.3.6.1.4.1.10876.101.1.119.1.4.1.36
.1.3.6.1.4.1.10876.101.1.119.2.3 · 1 row entry · 2 columns
List of per virtual bridge TrapsControl Info.
fsMIDot1wFsRstTrapsControlEntry entry .1.3.6.1.4.1.10876.101.1.119.2.3.1
Virtual bridge TrapsControl information.
Indexes
fsMIDot1wFutureRstContextId
Column Syntax OID
fsMIRstSetTraps
This object is used to enable and disable context-specific
RSTP traps. Currently the following are defined
0 - Traps are not enabled.
1 - Protocol up or down traps.
2 - Exception Traps like port protocol migration or i…
Integer32r/w
Constraints:
range: 0-3
.1.3.6.1.4.1.10876.101.1.119.2.3.1.1
fsMIRstGenTrapType
Used within the Trap Notification PDU.
It denotes general events like
none - none of the below values
up - protocol UP,
down - protocol DOWN
Enumeration
Enumerated Values:
0none
1up
2down
.1.3.6.1.4.1.10876.101.1.119.2.3.1.2
.1.3.6.1.4.1.10876.101.1.119.2.4 · 1 row entry · 6 columns
This table is used to store the notification information
occurred in each of the port for protocol migration and 
invalid packet received
fsMIRstPortTrapNotificationEntry entry .1.3.6.1.4.1.10876.101.1.119.2.4.1
This entry is used to store the notification information
Indexes
fsMIRstPortTrapIndex
Column Syntax OID
fsMIRstPortTrapIndex
A unique value, greater than zero, indicating the Port number.
Integer32
Constraints:
range: 1-4096
.1.3.6.1.4.1.10876.101.1.119.2.4.1.1
fsMIRstPortMigrationType
Port Protocol migration type occurred in the port
Enumeration
Enumerated Values:
0sendstp
1sendrstp
.1.3.6.1.4.1.10876.101.1.119.2.4.1.2
fsMIRstPktErrType
Type of invalid packet received in each of the port
Enumeration
Enumerated Values:
0protocolIdErr
1invalidBpdu
2configLengthErr
3tcnLengthErr
4rstpLengthErr
5maxAgeErr
6fwdDelayErr
7helloTimeErr
.1.3.6.1.4.1.10876.101.1.119.2.4.1.3
fsMIRstPktErrVal
Packet error value corresponding to the above type
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.10876.101.1.119.2.4.1.4
fsMIRstPortRoleType
Particular Role Selected for the Port
Enumeration
Enumerated Values:
0disabledPort
1alternatePort
2backupPort
3rootPort
4designatedPort
.1.3.6.1.4.1.10876.101.1.119.2.4.1.5
fsMIRstOldRoleType
Particular Role which is existing for the Port
Enumeration
Enumerated Values:
0disabledPort
1alternatePort
2backupPort
3rootPort
4designatedPort
.1.3.6.1.4.1.10876.101.1.119.2.4.1.6