fsMIRstFlushIndicationThreshold
SUPERMICRO-MIRSTP-MIB ·
.1.3.6.1.4.1.10876.101.1.119.1.3.1.22
Object
column
r/w
Integer32
This indicates the number of flush indications to go before
timer method triggers. (i.e) The number of flush indications
to trigger the FlushInterval Timer.
This value can be configurable only when fsMIRstFlushInterval
is other than default value.
When the value is retained as default value and flush interval
is being configured other than default value(0), then
global flushing will happen.
When this value is non-default and the flush interval is being
configured other than default value(0), then the port
based flushing will happen until the actual flush indication
reaches the threshold. Once the threshold is reached, timer
will be started and during timer expiry gloabl flushing will
happen.
Context
- MIB
- SUPERMICRO-MIRSTP-MIB
- OID
.1.3.6.1.4.1.10876.101.1.119.1.3.1.22- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsMIDot1wFutureRstEntry
- Table
- fsMIDot1wFutureRstTable
- Siblings
- 24
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMIDot1wFutureRstContextId Identifies the Virtual Bridge Context. | column | Integer32 | .1.3.6.1.4.1.10876.101.1.119.1.3.1.1 |
| fsMIRstNewRootIdCount The number of times this Bridge has detected a new Root in the topology.
A Trap is generated on the occurrence of this event. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.10876.101.1.119.1.3.1.10 |
| fsMIRstPortRoleSelSmState This indicates the current state of the Port Role Selection State
Machine. This object will hold the value 'initbridge' when the
Port Role Selection state machine is in the INIT… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.119.1.3.1.11 |
| fsMIRstOldDesignatedRoot The bridge identifier of the old root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. | column | SUPERMICRO-MIStdBRIDGE-MIBBridgeId | .1.3.6.1.4.1.10876.101.1.119.1.3.1.12 |
| fsMIRstDynamicPathcostCalculation This object is used to determine whether dynamic pathcost
calculation is allowed or not.The value is determined by
management. If set to true, pathcost is calculated dynamically … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.1.119.1.3.1.13 |
| fsMIRstContextName This object is used to identity the context-name. | column | OctetString | .1.3.6.1.4.1.10876.101.1.119.1.3.1.14 |
| fsMIRstCalcPortPathCostOnSpeedChg This object is used to determine whether dynamic pathcost
calculation is done for a port for which Port Speed is changing
dynamically. This is mainly intended for Link Aggregated … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.1.119.1.3.1.15 |
| fsMIRstClearBridgeStats This object is used to clear the statistical counters.When this
object is set to TRUE,it resets the bridge specific counters
and all the interface associated counters to zero.… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.1.119.1.3.1.16 |
| fsMIRstRcvdEvent This object gives information about the recently received event in the system.
Currently we support only ConfigurationEvent. | column | Enumeration | .1.3.6.1.4.1.10876.101.1.119.1.3.1.17 |
| fsMIRstRcvdEventSubType This object gives information about sub-type of the event received in the system
recently. The value of this object depends on the value of the object fsRstRcvdEvent.
For Configu… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.119.1.3.1.18 |
| fsMIRstRcvdEventTimeStamp The time stamp (in milli seconds) at which event specified by the object fsRstRcvdEvent
was received in the system at STP module for the last time. This object is introduced to me… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.1.119.1.3.1.19 |
| fsMIRstSystemControl The administrative system control status requested by management for
the RSTP feature. The value 'start'(1) indicates that all resources
required by RSTP should be allocated and … | column | Enumeration | .1.3.6.1.4.1.10876.101.1.119.1.3.1.2 |
| fsMIRstRcvdPortStateChangeTimeStamp The time stamp (in milli seconds) at which port state has been changed in
the system. This object is introduced to measure the convergence time in RSTP module. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.1.119.1.3.1.20 |
| fsMIRstFlushInterval This time value, measured in units of hundredths
of a second, controls the number of flush indications
invoked from RSTP module.
If set to zero, then normal port … | column | centi-seconds Integer32 | .1.3.6.1.4.1.10876.101.1.119.1.3.1.21 |
| fsMIRstTotalFlushCount The number of times flush is being triggered from
the STP stack in case of RSTP mode. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.10876.101.1.119.1.3.1.23 |
| fsMIRstFwdDelayAltPortRoleTrOptimization When ROLE_TRANSLATION takes place from ALTERNATE to DESIGNATED, the value with which
fdWhile timer started is controlled by this object configuration.
1. As per the standard IEE… | column | EnabledStatus | .1.3.6.1.4.1.10876.101.1.119.1.3.1.24 |
| fsMIRstBpduGuard This object configures BPDU guard globally in RSTP
and this global BPDU is applicable if and only if no Port specific
BpduGuard is configured.
Enable - enables BPDU Guard featu… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.119.1.3.1.25 |
| fsMIRstModuleStatus The administrative module status requested by management for the RSTP
Module. This enables or disables RSTP in the system. A value of 'enabled'
(1) indicates that RSTP must be ena… | column | EnabledStatus | .1.3.6.1.4.1.10876.101.1.119.1.3.1.3 |
| fsMIRstTraceOption This object is used to enable Trace Statements in the RSTP
Module.
A FOUR BYTE integer is used for enabling the level of tracing.
Each BIT in the four byte integer… | column | Integer32 | .1.3.6.1.4.1.10876.101.1.119.1.3.1.4 |
| fsMIRstDebugOption This object is used to enable Debug Statements in the RSTP
Module.
A FOUR BYTE integer is used for enabling the level of debugging.
Each BIT in the four byte integ… | column | Integer32 | .1.3.6.1.4.1.10876.101.1.119.1.3.1.5 |
| fsMIRstRstpUpCount The number of times RSTP Module has been enabled. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.10876.101.1.119.1.3.1.6 |
| fsMIRstRstpDownCount The number of times RSTP Module has been disabled. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.10876.101.1.119.1.3.1.7 |
| fsMIRstBufferFailureCount The number of times buffer overflows/failures have occurred.
A Trap is generated on the occurrence of this event. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.10876.101.1.119.1.3.1.8 |
| fsMIRstMemAllocFailureCount The number of times memory allocation failures have occurred.
A Trap is generated on the occurrence of this event. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.10876.101.1.119.1.3.1.9 |