fsMIRstSystemControl

SUPERMICRO-MIRSTP-MIB · .1.3.6.1.4.1.10876.101.1.119.1.3.1.2

Object

column r/w Enumeration

The administrative system control status requested by management for
the RSTP feature. The value 'start'(1) indicates that all resources 
required by RSTP should be allocated and RSTP should be supported 
in the device on all ports. The value shutdown(2) indicates that RSTP 
should be shutdown in the device on all ports and all allocated memory 
must be released.

Context

MIB: SUPERMICRO-MIRSTP-MIB
OID: .1.3.6.1.4.1.10876.101.1.119.1.3.1.2
Type: column
Access: readwrite
Status: current
Parent: fsMIDot1wFutureRstEntry
Table: fsMIDot1wFutureRstTable
Siblings: 24

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	start
`2`	shutdown

Related Objects

Sibling Objects

Object	Type	Syntax	OID
fsMIDot1wFutureRstContextId Identifies the Virtual Bridge Context.	column	Integer32	`.1.3.6.1.4.1.10876.101.1.119.1.3.1.1`
fsMIRstNewRootIdCount The number of times this Bridge has detected a new Root in the topology. A Trap is generated on the occurrence of this event.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.10876.101.1.119.1.3.1.10`
fsMIRstPortRoleSelSmState This indicates the current state of the Port Role Selection State Machine. This object will hold the value 'initbridge' when the Port Role Selection state machine is in the INIT…	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.119.1.3.1.11`
fsMIRstOldDesignatedRoot The bridge identifier of the old root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node.	column	SUPERMICRO-MIStdBRIDGE-MIBBridgeId	`.1.3.6.1.4.1.10876.101.1.119.1.3.1.12`
fsMIRstDynamicPathcostCalculation This object is used to determine whether dynamic pathcost calculation is allowed or not.The value is determined by management. If set to true, pathcost is calculated dynamically …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.10876.101.1.119.1.3.1.13`
fsMIRstContextName This object is used to identity the context-name.	column	OctetString	`.1.3.6.1.4.1.10876.101.1.119.1.3.1.14`
fsMIRstCalcPortPathCostOnSpeedChg This object is used to determine whether dynamic pathcost calculation is done for a port for which Port Speed is changing dynamically. This is mainly intended for Link Aggregated …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.10876.101.1.119.1.3.1.15`
fsMIRstClearBridgeStats This object is used to clear the statistical counters.When this object is set to TRUE,it resets the bridge specific counters and all the interface associated counters to zero.…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.10876.101.1.119.1.3.1.16`
fsMIRstRcvdEvent This object gives information about the recently received event in the system. Currently we support only ConfigurationEvent.	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.119.1.3.1.17`
fsMIRstRcvdEventSubType This object gives information about sub-type of the event received in the system recently. The value of this object depends on the value of the object fsRstRcvdEvent. For Configu…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.10876.101.1.119.1.3.1.18`
fsMIRstRcvdEventTimeStamp The time stamp (in milli seconds) at which event specified by the object fsRstRcvdEvent was received in the system at STP module for the last time. This object is introduced to me…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.10876.101.1.119.1.3.1.19`
fsMIRstRcvdPortStateChangeTimeStamp The time stamp (in milli seconds) at which port state has been changed in the system. This object is introduced to measure the convergence time in RSTP module.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.10876.101.1.119.1.3.1.20`
fsMIRstFlushInterval This time value, measured in units of hundredths of a second, controls the number of flush indications invoked from RSTP module. If set to zero, then normal port …	column	centi-seconds Integer32	`.1.3.6.1.4.1.10876.101.1.119.1.3.1.21`
fsMIRstFlushIndicationThreshold This indicates the number of flush indications to go before timer method triggers. (i.e) The number of flush indications to trigger the FlushInterval Timer. …	column	Integer32	`.1.3.6.1.4.1.10876.101.1.119.1.3.1.22`
fsMIRstTotalFlushCount The number of times flush is being triggered from the STP stack in case of RSTP mode.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.10876.101.1.119.1.3.1.23`
fsMIRstFwdDelayAltPortRoleTrOptimization When ROLE_TRANSLATION takes place from ALTERNATE to DESIGNATED, the value with which fdWhile timer started is controlled by this object configuration. 1. As per the standard IEE…	column	EnabledStatus	`.1.3.6.1.4.1.10876.101.1.119.1.3.1.24`
fsMIRstBpduGuard This object configures BPDU guard globally in RSTP and this global BPDU is applicable if and only if no Port specific BpduGuard is configured. Enable - enables BPDU Guard featu…	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.119.1.3.1.25`
fsMIRstModuleStatus The administrative module status requested by management for the RSTP Module. This enables or disables RSTP in the system. A value of 'enabled' (1) indicates that RSTP must be ena…	column	EnabledStatus	`.1.3.6.1.4.1.10876.101.1.119.1.3.1.3`
fsMIRstTraceOption This object is used to enable Trace Statements in the RSTP Module. A FOUR BYTE integer is used for enabling the level of tracing. Each BIT in the four byte integer…	column	Integer32	`.1.3.6.1.4.1.10876.101.1.119.1.3.1.4`
fsMIRstDebugOption This object is used to enable Debug Statements in the RSTP Module. A FOUR BYTE integer is used for enabling the level of debugging. Each BIT in the four byte integ…	column	Integer32	`.1.3.6.1.4.1.10876.101.1.119.1.3.1.5`
fsMIRstRstpUpCount The number of times RSTP Module has been enabled.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.10876.101.1.119.1.3.1.6`
fsMIRstRstpDownCount The number of times RSTP Module has been disabled.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.10876.101.1.119.1.3.1.7`
fsMIRstBufferFailureCount The number of times buffer overflows/failures have occurred. A Trap is generated on the occurrence of this event.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.10876.101.1.119.1.3.1.8`
fsMIRstMemAllocFailureCount The number of times memory allocation failures have occurred. A Trap is generated on the occurrence of this event.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.10876.101.1.119.1.3.1.9`