fsMIRstPortRoleSelSmState

SUPERMICRO-MIRSTP-MIB · .1.3.6.1.4.1.10876.101.1.119.1.3.1.11
MIB view Table view

Object

column Enumeration 
This indicates the current state of the Port Role Selection State 
Machine. This object will hold the value 'initbridge' when the 
Port Role Selection state machine is in the INIT_BRIDGE state and 
the value of 'roleselection' when the state machine is in the 
ROLE_SELECTION state.

Context

MIB
SUPERMICRO-MIRSTP-MIB
OID
.1.3.6.1.4.1.10876.101.1.119.1.3.1.11
Type
column
Access
readonly
Status
current
Parent
fsMIDot1wFutureRstEntry
Table
fsMIDot1wFutureRstTable
Siblings
24

Syntax

Enumeration

Values & Constraints

Enumerated Values
0initbridge
1roleselection

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsMIDot1wFutureRstContextId
Identifies the Virtual Bridge Context.
columnInteger32.1.3.6.1.4.1.10876.101.1.119.1.3.1.1
fsMIRstNewRootIdCount
The number of times this Bridge has detected a new Root in the topology. A Trap is generated on the occurrence of this event.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.10876.101.1.119.1.3.1.10
fsMIRstOldDesignatedRoot
The bridge identifier of the old root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node.
columnSUPERMICRO-MIStdBRIDGE-MIBBridgeId.1.3.6.1.4.1.10876.101.1.119.1.3.1.12
fsMIRstDynamicPathcostCalculation
This object is used to determine whether dynamic pathcost calculation is allowed or not.The value is determined by management. If set to true, pathcost is calculated dynamically …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.1.119.1.3.1.13
fsMIRstContextName
This object is used to identity the context-name.
columnOctetString.1.3.6.1.4.1.10876.101.1.119.1.3.1.14
fsMIRstCalcPortPathCostOnSpeedChg
This object is used to determine whether dynamic pathcost calculation is done for a port for which Port Speed is changing dynamically. This is mainly intended for Link Aggregated …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.1.119.1.3.1.15
fsMIRstClearBridgeStats
This object is used to clear the statistical counters.When this object is set to TRUE,it resets the bridge specific counters and all the interface associated counters to zero.…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.1.119.1.3.1.16
fsMIRstRcvdEvent
This object gives information about the recently received event in the system. Currently we support only ConfigurationEvent.
columnEnumeration.1.3.6.1.4.1.10876.101.1.119.1.3.1.17
fsMIRstRcvdEventSubType
This object gives information about sub-type of the event received in the system recently. The value of this object depends on the value of the object fsRstRcvdEvent. For Configu…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.1.119.1.3.1.18
fsMIRstRcvdEventTimeStamp
The time stamp (in milli seconds) at which event specified by the object fsRstRcvdEvent was received in the system at STP module for the last time. This object is introduced to me…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.119.1.3.1.19
fsMIRstSystemControl
The administrative system control status requested by management for the RSTP feature. The value 'start'(1) indicates that all resources required by RSTP should be allocated and …
columnEnumeration.1.3.6.1.4.1.10876.101.1.119.1.3.1.2
fsMIRstRcvdPortStateChangeTimeStamp
The time stamp (in milli seconds) at which port state has been changed in the system. This object is introduced to measure the convergence time in RSTP module.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.119.1.3.1.20
fsMIRstFlushInterval
This time value, measured in units of hundredths of a second, controls the number of flush indications invoked from RSTP module. If set to zero, then normal port …
columncenti-seconds Integer32.1.3.6.1.4.1.10876.101.1.119.1.3.1.21
fsMIRstFlushIndicationThreshold
This indicates the number of flush indications to go before timer method triggers. (i.e) The number of flush indications to trigger the FlushInterval Timer. …
columnInteger32.1.3.6.1.4.1.10876.101.1.119.1.3.1.22
fsMIRstTotalFlushCount
The number of times flush is being triggered from the STP stack in case of RSTP mode.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.10876.101.1.119.1.3.1.23
fsMIRstFwdDelayAltPortRoleTrOptimization
When ROLE_TRANSLATION takes place from ALTERNATE to DESIGNATED, the value with which fdWhile timer started is controlled by this object configuration. 1. As per the standard IEE…
columnEnabledStatus.1.3.6.1.4.1.10876.101.1.119.1.3.1.24
fsMIRstBpduGuard
This object configures BPDU guard globally in RSTP and this global BPDU is applicable if and only if no Port specific BpduGuard is configured. Enable - enables BPDU Guard featu…
columnEnumeration.1.3.6.1.4.1.10876.101.1.119.1.3.1.25
fsMIRstModuleStatus
The administrative module status requested by management for the RSTP Module. This enables or disables RSTP in the system. A value of 'enabled' (1) indicates that RSTP must be ena…
columnEnabledStatus.1.3.6.1.4.1.10876.101.1.119.1.3.1.3
fsMIRstTraceOption
This object is used to enable Trace Statements in the RSTP Module. A FOUR BYTE integer is used for enabling the level of tracing. Each BIT in the four byte integer…
columnInteger32.1.3.6.1.4.1.10876.101.1.119.1.3.1.4
fsMIRstDebugOption
This object is used to enable Debug Statements in the RSTP Module. A FOUR BYTE integer is used for enabling the level of debugging. Each BIT in the four byte integ…
columnInteger32.1.3.6.1.4.1.10876.101.1.119.1.3.1.5
fsMIRstRstpUpCount
The number of times RSTP Module has been enabled.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.10876.101.1.119.1.3.1.6
fsMIRstRstpDownCount
The number of times RSTP Module has been disabled.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.10876.101.1.119.1.3.1.7
fsMIRstBufferFailureCount
The number of times buffer overflows/failures have occurred. A Trap is generated on the occurrence of this event.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.10876.101.1.119.1.3.1.8
fsMIRstMemAllocFailureCount
The number of times memory allocation failures have occurred. A Trap is generated on the occurrence of this event.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.10876.101.1.119.1.3.1.9