SLE-MPLS-TP-LPS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
19

sleMplsTpLpsCfgInfoTable

table
.1.3.6.1.4.1.6296.101.16.18.1.1 · 1 row entry · 14 columns
Open in standard view 
This table lists the sleMplsTp linear protection groups that
have been configured on the system.
sleMplsTpLpsCfgInfoEntry entry .1.3.6.1.4.1.6296.101.16.18.1.1.1
A conceptual row in the sleMplsTpLpsCfgInfoTable.
Indexes
sleMplsTpLpsCfgInfoGroupIndex
Column Syntax OID
sleMplsTpLpsCfgInfoGroupIndex
Index for the conceptual row identifying a protection group.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6296.101.16.18.1.1.1.1
sleMplsTpLpsCfgInfoGroupName
Textual name represents the sleMplsTp tp protection group.
Each Protection Group is identified by a unique
protection group name.
OctetString
Constraints:
range: 1-128
 .1.3.6.1.4.1.6296.101.16.18.1.1.1.2
sleMplsTpLpsCfgInfoMode
The architectural mode of the Protection group. This can
either be 1+1, 1:1, 1:n.

1+1

In the 1+1 protection scheme, a fully dedicated
protection entity is allocated. Data traffic is copied
…
Enumeration
Enumerated Values:
1onePlusOne
2oneColonOne
3oneColonN
 .1.3.6.1.4.1.6296.101.16.18.1.1.1.3
sleMplsTpLpsCfgInfoProtectionScheme
The object represents the operational scheme of
protection switching group. The protection scheme may
either be unidirectional or bidirectional.

bidirectional
In bidirectional protection scheme, both the …
Enumeration
Enumerated Values:
1bidirectional
2unidirectional
 .1.3.6.1.4.1.6296.101.16.18.1.1.1.4
sleMplsTpLpsCfgInfoRevertive
This object represents the reversion mode of the Linear
Protection Switching group. The reversion mode of
protection mechanism may be either revertive or
non-revertive.

In non-revertive mode, after a serv…
Enumeration
Enumerated Values:
1nonrevertive
2revertive
 .1.3.6.1.4.1.6296.101.16.18.1.1.1.5
sleMplsTpLpsCfgInfoWtr
This object hold the Wait To Restore timer value in
seconds.
The WTR timer is used to delay reversion of PSC state
to Normal state when recovering from a failure
condition on the working path when the protection
domain …
secondsUnsigned32
Constraints:
range: 0-720
 .1.3.6.1.4.1.6296.101.16.18.1.1.1.6
sleMplsTpLpsCfgInfoContinualTxInterval
The Continual Tx Time in Seconds. Represents the time
interval to send the continual LPS packet to the other
end based on the current state.
secondsUnsigned32
Constraints:
range: 1-20
 .1.3.6.1.4.1.6296.101.16.18.1.1.1.7
sleMplsTpLpsCfgInfoRapidTxInterval
The Rapid Tx interval in micro-Seconds. Represents the time
interval to send the LPS packet to the other end, when
there is a change in state of Linear Protection domain due
to local input. The default value is 3.3 mill…
micro-secondsUnsigned32
Constraints:
range: 1000-20000
 .1.3.6.1.4.1.6296.101.16.18.1.1.1.8
sleMplsTpLpsCfgInfoSwitchOver
this object used for switch the traffic to the back up path.
Enumeration
Enumerated Values:
0none
1forced
2manual
 .1.3.6.1.4.1.6296.101.16.18.1.1.1.9
sleMplsTpLpsCfgInfoLockOut
this is object is used for preventing the swith traffic by the protection path.
Enumeration
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.6296.101.16.18.1.1.1.10
sleMplsTpLpsCfgInfoHoldOffTimer
this object used for show the hold off timer.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6296.101.16.18.1.1.1.11
sleMplsTpLpsCfgInfoActivePath
This object say which path is Active .
Enumeration
Enumerated Values:
1primary
2backup
 .1.3.6.1.4.1.6296.101.16.18.1.1.1.12
sleMplsTpLpsCfgInfoOperationState
this object says Operational Status of LPS. The LPS is between PE to PE.
Enumeration
Enumerated Values:
0down
1up
 .1.3.6.1.4.1.6296.101.16.18.1.1.1.13
sleMplsTpLpsCfgInfoEventStatus
This is object says EVENT Status of LPS protection .
Enumeration
Enumerated Values:
1normal
2protection
3localForce
4localManual
5localSgfProtection
6localSgfWorking
7localWtr
8localLock
9localClrSfProtection
10localClrSfWorking
11localClrEvent
12remoteLock
13remoteForce
14remoteManual
15remoteSfProtect
16remoteSfWork
17remoteWtr
18remoteNoReq
19remoteNotRevert
20noRequest
21remoteSdWork
22remoteSdProtection
23remoteExesWork
24remoteExesProtect
25remoteRrReqWork
26remoteRrReqProtec
27remoteNoReqWork
28remoteNoReqProtection
29localSdProtection
30localClearSdProtection
31localSdWorking
32localClearSdWorking
33localExercise
 .1.3.6.1.4.1.6296.101.16.18.1.1.1.14

sleMplsTpLpsMeCfgInfoTable

table
.1.3.6.1.4.1.6296.101.16.18.2.1 · 1 row entry · 5 columns
Open in standard view 
This table lists Maintenance Association that have been
configured in Protection groups.
sleMplsTpLpsMeCfgInfoEntry entry .1.3.6.1.4.1.6296.101.16.18.2.1.1
A conceptual row in the sleMplsTpLpsMeCfgInfoTable.
Indexes
sleMplsTpLpsMeCfgInfoMeIndex sleMplsTpLpsMeCfgInfoMPId sleMplsTpLspMeCfgInfoGroupIndex sleMplsTpLpsMeCfgInfoMegIndex
Column Syntax OID
sleMplsTpLpsMeCfgInfoMegIndex
Uniquely identifies a maintenance entity index within
a MEG.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6296.101.16.18.2.1.1.1
sleMplsTpLpsMeCfgInfoMeIndex
This object denotes the ME name, each
Maintenance Entity has unique name within MEG.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6296.101.16.18.2.1.1.2
sleMplsTpLpsMeCfgInfoMPId
Indicates the maintenance point index, used to create
multiple MEPs in a node of single ME. The value of this
object can be MEP index or MIP index. Managers should
obtain new values for row creation in this table by re…
Unsigned32
Constraints:
range: 1-8191
 .1.3.6.1.4.1.6296.101.16.18.2.1.1.3
sleMplsTpLspMeCfgInfoGroupIndex
Textual name represents the sleMplsTp tp protection group.
Each Protection Group is identified by a unique
protection group name.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6296.101.16.18.2.1.1.4
sleMplsTpLpsMeCfgInfoState
This object represents the operational state of the ME
as either primary or backup
Enumerationr/w
Enumerated Values:
1primary
2backup
 .1.3.6.1.4.1.6296.101.16.18.2.1.1.5