sleMplsTpLpsCfgInfoSwitchOver
SLE-MPLS-TP-LPS-MIB ·
.1.3.6.1.4.1.6296.101.16.18.1.1.1.9
Object
column
Enumeration
this object used for switch the traffic to the back up path.
Context
- MIB
- SLE-MPLS-TP-LPS-MIB
- OID
.1.3.6.1.4.1.6296.101.16.18.1.1.1.9- Type
- column
- Access
- readonly
- Status
- current
- Parent
- sleMplsTpLpsCfgInfoEntry
- Table
- sleMplsTpLpsCfgInfoTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | none |
1 | forced |
2 | manual |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sleMplsTpLpsCfgInfoGroupIndex Index for the conceptual row identifying a protection group. | column | Unsigned32 | .1.3.6.1.4.1.6296.101.16.18.1.1.1.1 |
| sleMplsTpLpsCfgInfoLockOut this is object is used for preventing the swith traffic by the protection path. | column | Enumeration | .1.3.6.1.4.1.6296.101.16.18.1.1.1.10 |
| sleMplsTpLpsCfgInfoHoldOffTimer this object used for show the hold off timer. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6296.101.16.18.1.1.1.11 |
| sleMplsTpLpsCfgInfoActivePath This object say which path is Active . | column | Enumeration | .1.3.6.1.4.1.6296.101.16.18.1.1.1.12 |
| sleMplsTpLpsCfgInfoOperationState this object says Operational Status of LPS. The LPS is between PE to PE. | column | Enumeration | .1.3.6.1.4.1.6296.101.16.18.1.1.1.13 |
| sleMplsTpLpsCfgInfoEventStatus This is object says EVENT Status of LPS protection . | column | Enumeration | .1.3.6.1.4.1.6296.101.16.18.1.1.1.14 |
| sleMplsTpLpsCfgInfoGroupName Textual name represents the sleMplsTp tp protection group.
Each Protection Group is identified by a unique
protection group name. | column | OctetString | .1.3.6.1.4.1.6296.101.16.18.1.1.1.2 |
| sleMplsTpLpsCfgInfoMode The architectural mode of the Protection group. This can
either be 1+1, 1:1, 1:n.
1+1
In the 1+1 protection scheme, a fully dedicated
protection enti… | column | Enumeration | .1.3.6.1.4.1.6296.101.16.18.1.1.1.3 |
| sleMplsTpLpsCfgInfoProtectionScheme The object represents the operational scheme of
protection switching group. The protection scheme may
either be unidirectional or bidirectional.
bidirectional
In bi… | column | Enumeration | .1.3.6.1.4.1.6296.101.16.18.1.1.1.4 |
| sleMplsTpLpsCfgInfoRevertive This object represents the reversion mode of the Linear
Protection Switching group. The reversion mode of
protection mechanism may be either revertive or
non-revertive.
… | column | Enumeration | .1.3.6.1.4.1.6296.101.16.18.1.1.1.5 |
| sleMplsTpLpsCfgInfoWtr This object hold the Wait To Restore timer value in
seconds.
The WTR timer is used to delay reversion of PSC state
to Normal state when recovering from a failure
condition on the … | column | seconds Unsigned32 | .1.3.6.1.4.1.6296.101.16.18.1.1.1.6 |
| sleMplsTpLpsCfgInfoContinualTxInterval The Continual Tx Time in Seconds. Represents the time
interval to send the continual LPS packet to the other
end based on the current state. | column | seconds Unsigned32 | .1.3.6.1.4.1.6296.101.16.18.1.1.1.7 |
| sleMplsTpLpsCfgInfoRapidTxInterval The Rapid Tx interval in micro-Seconds. Represents the time
interval to send the LPS packet to the other end, when
there is a change in state of Linear Protection domain due
to lo… | column | micro-seconds Unsigned32 | .1.3.6.1.4.1.6296.101.16.18.1.1.1.8 |