SA-RG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
25
Rows
25
Columns
117
.1.3.6.1.4.1.1429.79.2.1.5.2 · 1 row entry · 2 columns
Up to 3 NTP servers are supported. This table
is stored in non-vol. Default entries after factory
reset are:
1: time.nist.gov
2: nist.aol-ca.truetime.com
3: nist1-ny.glassey.com
saRgDeviceTimeSetupNtpServerEntry entry .1.3.6.1.4.1.1429.79.2.1.5.2.1
Indexes
saRgDeviceTimeSetupNtpServerIndex
Column Syntax OID
saRgDeviceTimeSetupNtpServerIndex
The index
Integer32
Constraints:
range: 1-3
.1.3.6.1.4.1.1429.79.2.1.5.2.1.1
saRgDeviceTimeSetupNtpServerAddress
IP address or FQDN of the NTP server.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.1429.79.2.1.5.2.1.2
.1.3.6.1.4.1.1429.79.2.1.7.4 · 1 row entry · 4 columns
Table of IA Address entries associated with IA_NA for the
eRouter's DHCPv6 lease.
saRgDeviceIanaEntry entry .1.3.6.1.4.1.1429.79.2.1.7.4.1
Table of IA Address entries associated with IA_NA for the
eRouter's DHCPv6 lease.
Indexes
saRgDeviceIanaIndex
Column Syntax OID
saRgDeviceIanaIndex
The index
Integer32
Constraints:
range: 1-4
.1.3.6.1.4.1.1429.79.2.1.7.4.1.1
saRgDeviceIanaValue
IPv6 address provided to the eRouter WAN interface via DHCPv6.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.1429.79.2.1.7.4.1.2
saRgDeviceIanaPreferredLifetime
Preferred Lifetime setting for an IPv6 address assigned to the
eRouter.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.1429.79.2.1.7.4.1.3
saRgDeviceIanaValidLifetime
Valid Lifetime setting for an IPv6 address assigned to the
eRouter.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.1429.79.2.1.7.4.1.4
.1.3.6.1.4.1.1429.79.2.1.8.4 · 1 row entry · 5 columns
Table of IA Prefix entries associated with IA_PD for the
eRouter's DHCPv6 lease.
saRgDeviceIapdEntry entry .1.3.6.1.4.1.1429.79.2.1.8.4.1
Table of IA Address entries associated with IA_PD for the
eRouter's DHCPv6 lease.
Indexes
saRgDeviceIapdIndex
Column Syntax OID
saRgDeviceIapdIndex
The index
Integer32
Constraints:
range: 1-4
.1.3.6.1.4.1.1429.79.2.1.8.4.1.1
saRgDeviceIapdPreferredLifetime
Preferred Lifetime setting for an IPv6 address assigned to the
eRouter.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.1429.79.2.1.8.4.1.2
saRgDeviceIapdValidLifetime
Valid Lifetime setting for an IPv6 address assigned to the
eRouter.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.1429.79.2.1.8.4.1.3
saRgDeviceIapdPrefixLength
Length (in bits) for this prefix.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.1429.79.2.1.8.4.1.4
saRgDeviceIapdPrefixValue
Prefix address specified in the IA_PD.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.1429.79.2.1.8.4.1.5
.1.3.6.1.4.1.1429.79.2.2.2.1 · 1 row entry · 11 columns
BSS table
saRgDot11BssEntry entry .1.3.6.1.4.1.1429.79.2.2.2.1.1
A row in the table which represents parameters for SSID.
Indexes
IF-MIBifIndex
Column Syntax OID
saRgDot11BssId
Returns the BSSID
SNMPv2-TCPhysAddress
Textual Convention: SNMPv2-TCPhysAddress OctetString
.1.3.6.1.4.1.1429.79.2.2.2.1.1.1
saRgDot11BssEnable
Controls the BSS state.
When set to enableOnline(3), the SSID is enabled only
when the cable modem is online. When the modem changes
state to offline, the AP will send dissasociation messages
to the STAs connected to th…
Enumerationr/w
Enumerated Values:
1enable
2disable
3enableOnline
.1.3.6.1.4.1.1429.79.2.2.2.1.1.2
saRgDot11BssSsid
Controls and reflects the service set identifier.
The value of primary BSS is stored in non-vol and is
empty after factory reset.
If other BSS's SSID name is not defined, the BSS
will not be enabled.
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.1429.79.2.2.2.1.1.3
saRgDot11BssSecurityMode
Secrity for BSS.
Beacause WPA2 is backwords compatible with WPA, setting this
object to wpaWpa2Psk(7) is allowed and has the same effect as
setting to wpa2Psk(3). The same is true for wpaWpa2Enterprise(8)
and wpa2Enterp…
Enumerationr/w
Enumerated Values:
0disabled
1wep
2wpaPsk
3wpa2Psk
4wpaEnterprise
5wpa2Enterprise
7wpaWpa2Psk
8wpaWpa2Enterprise
.1.3.6.1.4.1.1429.79.2.2.2.1.1.4
saRgDot11BssClosedNetwork
Controls whether the device will operate in closed network mode. If
set to true(1), then the network mode is closed and the SSID will not
be broadcast in beacon packets. If set to false(2), then the network
mode is op…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.1429.79.2.2.2.1.1.5
saRgDot11BssAccessMode
Controls what stations will be given access to the device. If set to
allowAny(0), then any station will be allowed to connect. If set
to allowList(1), then only stations whose MAC address appears in
the saRgDot11Acces…
Enumerationr/w
Enumerated Values:
0allowAny
1allowList
2denyList
.1.3.6.1.4.1.1429.79.2.2.2.1.1.6
saRgDot11BssMaxNumSta
This object defines the maximum number of STAs that can connect to
this SSID. Note that the maximum number of STA accross all SSIDs in
the AP is 128.
Default value is 128 for all SSIDs.
The value for primary BSS is stor…
Integer32r/w
Constraints:
range: 1-128
.1.3.6.1.4.1.1429.79.2.2.2.1.1.11
saRgDot11BssUserStatus
Provides the BSS Id Web UI or Wireless ON/OFF (if exist) status that
is set by the user. If the user can press the Wireless ON/OFF (if
exist) button and its status can be seen in BSS ID Web UI. If user
changes access po…
Enumeration
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.1429.79.2.2.2.1.1.13
saRgDot11BssApIsolation
This MIB is only available in D3.0 products.
AP Isolation (Access Point Isolation) allows you to isloate traffic between CPEs on
the same Wifi SSID. This allows a measure of security to prevent hackers from accessing ot…
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.1429.79.2.2.2.1.1.15
saRgDot11BssSecSsidTrafficPriority
This MIB is only available in D3.0 products and applicable for secondary SSID in hotspot
environment. When disabled, all the traffic to the secondary SSID in question would have same WMM QoS
parameters as the primary SS…
Enumeration
Enumerated Values:
0disable
1acBk
.1.3.6.1.4.1.1429.79.2.2.2.1.1.16
saRgDot11BssRejectPriSsidSta
This MIB is only available in D3.0 products and applicable for secondary SSID in hotspot
environment. By default, a private SSID STA can associate to hotspot SSID. This MIB can be used
to reject private SSID STAs to ass…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.1429.79.2.2.2.1.1.17
.1.3.6.1.4.1.1429.79.2.2.3.1 · 1 row entry · 3 columns
WPA table
saRgDot11WpaEntry entry .1.3.6.1.4.1.1429.79.2.2.3.1.1
A row in the table which represents WPA parameters for BSS.
Indexes
IF-MIBifIndex
Column Syntax OID
saRgDot11WpaAlgorithm
The value of tkip(0) is not allowed when security is WPA2.
The value for primary BSS is stored in non-vol and tkipPlusAes(2)
after factory reset.
The default value for other BSSs is tkip.
Enumerationr/w
Enumerated Values:
0tkip
1aes
2tkipPlusAes
.1.3.6.1.4.1.1429.79.2.2.3.1.1.1
saRgDot11WpaPreSharedKey
Sets the WPA Pre-Shared Key (PSK). This value MUST be either a
64-digit hexadecimal number, OR a 8 to 63 character ASCII string.
The value for primary BSS is stored in non-vol and is the serial
number of the device aft…
OctetStringr/w
Constraints:
range: 8-64
.1.3.6.1.4.1.1429.79.2.2.3.1.1.2
saRgDot11WpaGroupRekeyInterval
Sets the WPA Group Rekey Interval in seconds. Set to zero to disable
periodic rekeying.
The value for primary BSS is stored in non-vol and is 3600 after
factory reset.
The default value for other BSSs is 3600.
secondsSNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.1429.79.2.2.3.1.1.3
.1.3.6.1.4.1.1429.79.2.2.3.2 · 1 row entry · 5 columns
WPA table
saRgDot11RadiusEntry entry .1.3.6.1.4.1.1429.79.2.2.3.2.1
A row in the table which represents WPA parameters for BSS.
Indexes
IF-MIBifIndex
Column Syntax OID
saRgDot11RadiusAddressType
Type of RADIUS server IP address.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.1429.79.2.2.3.2.1.1
saRgDot11RadiusAddress
Sets RADIUS server IP address.
The value for primary BSS is stored in non-vol and is 0.0.0.0
after factory reset.
The default value for other BSSs is 0.0.0.0.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.1429.79.2.2.3.2.1.2
saRgDot11RadiusPort
Sets the UDP port used to communicate with the RADIUS server.
The value for primary BSS is stored in non-vol and is 1645
after factory reset.
The default value for other BSSs is 1645.
INET-ADDRESS-MIBInetPortNumberr/w
Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.1429.79.2.2.3.2.1.3
saRgDot11RadiusKey
Sets or displays the RADIUS key.
The value for primary BSS is stored in non-vol and is null
after factory reset.
The default value for other BSSs is null.
This object return an empty string when read.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.1429.79.2.2.3.2.1.4
saRgDot11RadiusReAuthInterval
Sets the RADIUS Rekey Interval in seconds.
Set to zero to disable periodic rekeying.
The value for primary BSS is stored in non-vol and is 3600
after factory reset.
The default value for other BSSs is 3600.
secondsSNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.1429.79.2.2.3.2.1.5
.1.3.6.1.4.1.1429.79.2.2.3.3 · 1 row entry · 3 columns
WEP table
saRgDot11WepEntry entry .1.3.6.1.4.1.1429.79.2.2.3.3.1
A row in the table which represents WPA parameters for BSS.
Indexes
IF-MIBifIndex
Column Syntax OID
saRgDot11WepDefaultKey
Controls and reflects the default key which will be used when 64 or
128 bit encryption is enabled. Indicates the entry from the
saRgDot1164BitKeyTable if saRgDot11EncryptionMode is set to wep64(1), or
the entry from th…
Integer32r/w
Constraints:
range: 1-4
.1.3.6.1.4.1.1429.79.2.2.3.3.1.1
saRgDot11WepEncryptionMode
The value for primary BSS is stored in non-vol and is wep128(1)
after factory reset.
The default value for other BSSs is wep128.
Enumerationr/w
Enumerated Values:
0wep64
1wep128
.1.3.6.1.4.1.1429.79.2.2.3.3.1.2
saRgDot11WepPassPhrase
Controls and reflects the WEP pass phrase.
The value for primary BSS is stored in non-vol and is null
after factory reset.
The default value for other BSSs is null.
This object return an empty string when read.
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.1429.79.2.2.3.3.1.3
.1.3.6.1.4.1.1429.79.2.2.3.4 · 1 row entry · 2 columns
A table of 40 bit key values used when saRgDot11WepEncryptionMode
is set to wep64(0).
saRgDot11Wep64BitKeyEntry entry .1.3.6.1.4.1.1429.79.2.2.3.4.1
A row in the table which represents a single 64 bit key.
Indexes
IF-MIBifIndex saRgDot11Wep64BitKeyIndex
Column Syntax OID
saRgDot11Wep64BitKeyIndex
Identifies the instance of this table row.
Integer32
Constraints:
range: 1-4
.1.3.6.1.4.1.1429.79.2.2.3.4.1.1
saRgDot11Wep64BitKeyValue
A 40 bit key to be used when saRgDot11WepEncryptionMode is set to wep64(1).
The value for primary BSS is stored in non-vol and is all 1's after factory
reset.
The default value for other BSSs is all 0's.
This object ret…
OctetStringr/w
Constraints:
range: 5-5
.1.3.6.1.4.1.1429.79.2.2.3.4.1.2
.1.3.6.1.4.1.1429.79.2.2.3.5 · 1 row entry · 2 columns
A table of 104 bit key values used when saRgDot11WepEncryptionMode
is set to wep128(1).
saRgDot11Wep128BitKeyEntry entry .1.3.6.1.4.1.1429.79.2.2.3.5.1
A row in the table which represents a single 128 bit key.
Indexes
IF-MIBifIndex saRgDot11Wep128BitKeyIndex
Column Syntax OID
saRgDot11Wep128BitKeyIndex
Identifies the instance of this table row.
Integer32
Constraints:
range: 1-4
.1.3.6.1.4.1.1429.79.2.2.3.5.1.1
saRgDot11Wep128BitKeyValue
A 104 bit key to be used when saRgDot11WepEncryptionMode is set to wep128(2).
The value for primary BSS is stored in non-vol and is all 1's.
The default value for other BSSs is all 0's.
This object return an empty strin…
OctetStringr/w
Constraints:
range: 13-13
.1.3.6.1.4.1.1429.79.2.2.3.5.1.2
.1.3.6.1.4.1.1429.79.2.2.4.2 · 1 row entry · 2 columns
A table of wireless clients that are associated with the BSS.
saRgDot11ClientEntry entry .1.3.6.1.4.1.1429.79.2.2.4.2.1
A row in the table that specifies a single station MAC address.
Indexes
IF-MIBifIndex saRgDot11ClientIndex
Column Syntax OID
saRgDot11ClientIndex
Indicates the instance of this table row.
Integer32
Constraints:
range: 1-128
.1.3.6.1.4.1.1429.79.2.2.4.2.1.1
saRgDot11ClientStation
A MAC address of a client associated with the BSS.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
.1.3.6.1.4.1.1429.79.2.2.4.2.1.2
.1.3.6.1.4.1.1429.79.2.2.6.1 · 1 row entry · 4 columns
Multiple Radio Configuration Table
saRgDot11ExtMgmtEntry entry .1.3.6.1.4.1.1429.79.2.2.6.1.1
A row in the table which represents parameters for a Radio.
Index 32 should be set for Radio 0 -- 2.4 GHz if populated.
Index 112 should be set for Radio 1
Indexes
IF-MIBifIndex
Column Syntax OID
saRgDot11ExtMbssUserControl
Sets the number of user controlled Wifi networks via web pages.
1: The user has control over the primary wireless network only.
No guest network page is displayed.
2: The user has control over the primary wireless ne…
Integer32r/w
Constraints:
range: 1-8
range: 65536-16711680
.1.3.6.1.4.1.1429.79.2.2.6.1.1.15
saRgDot11ExtMbssUseNonvol
Allows to save additional BSS parameters to non-vol if set to true.
Primary BSS parameters are ALWAYS stored in non-vol.
This object value is stored in non-vol and set to false
after factory reset.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.1429.79.2.2.6.1.1.16
saRgDot11ExtMbssAdminControl
Sets the number of admin controlled Wifi networks via web pages.
1: The admin has control over the primary wireless network only.
No guest network page is displayed.
2: The admin has control over the primary wireless…
Integer32r/w
Constraints:
range: 1-8
range: 65536-16711680
.1.3.6.1.4.1.1429.79.2.2.6.1.1.17
saRgDot11ExtActualChannel
Reports the current channel number that wireless is on.
The value of 0 means wireless is disabled.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.1429.79.2.2.6.1.1.18
.1.3.6.1.4.1.1429.79.2.3.2 · 1 row entry · 11 columns
Networks on the LAN side.
Primary BSS stored in non-vol.
saRgIpMgmtLanEntry entry .1.3.6.1.4.1.1429.79.2.3.2.1
List of networks on the LAN side.
Indexes
IF-MIBifIndex
Column Syntax OID
saRgIpMgmtLanMode
Defines the mode of operation for the device.
Setting this object via SNMP for the primary BSS will cause
the unit to reboot.
Setting this object via SNMP for the secondary BSSs will not
cause the unit to reboot.
The va…
Enumerationr/w
Enumerated Values:
1bridge
2router
3l2tpv2-client
4mixed
5vlan
.1.3.6.1.4.1.1429.79.2.3.2.1.1
saRgIpMgmtLanNetwork
The LAN-Trans network number.
Default for primary BSS is 192.168.0.0
Default for other BSSs is 192.168.ifIndex.0
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.1429.79.2.3.2.1.3
saRgIpMgmtLanNetworksAllow
Allows the user via the internal Web GUI (Lan Setup page
to input an IPv4 public or private Local IP address other than a
class C Private address (the default Network for the Primary BSS = 192.168.0.0/24, with
the defau…
Enumerationr/w
Enumerated Values:
0default
1anyPrivateClass
2anyClass
.1.3.6.1.4.1.1429.79.2.3.2.1.4
saRgIpMgmtLanSubnetMask
The device MUST provide the value of this MIB
object in the Option 1 (Subnet Mask) of
DHCP OFFER and ACK messages sent to a LAN IP Device.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.1429.79.2.3.2.1.5
saRgIpMgmtLanGateway
The type of this address is specified by
saRgIpMgmtLanNetwokRouterType. The PS MUST
provide the value of this MIB object in the
Option 3 (Router IP address) of the DHCP
OFFER and ACK messages sent to the LAN IP Device.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.1429.79.2.3.2.1.7
saRgIpMgmtLanDhcpServer
The value for primary BSS is stored in non-vol.
The default value for other BSSs is:
Enabled by default if interface is in router mode.
Always disabled if interface is in bridge mode.
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.1429.79.2.3.2.1.8
saRgIpMgmtLanNapt
The value for primary BSS is stored in non-vol.
The default value for other BSSs is:
Enabled by default if interface is in router mode.
Always disabled if interface is in bridge mode.
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.1429.79.2.3.2.1.9
saRgIpMgmtLanTypeOfService
Definition of the TOS bits for the Network.
This object does not apply to primary BSS.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.1429.79.2.3.2.1.10
saRgIpMgmtLanDhcp125Option
This option controls if the RG adds a Cisco specific
suboption (number 17) to DHCP DISCOVER and REQUEST
from the clients that are bridged on the BSS:
0: do not add the option
1: add suboption 17 to Cisco specific enterp…
Enumerationr/w
Enumerated Values:
0disable
1addSsidName
.1.3.6.1.4.1.1429.79.2.3.2.1.11
saRgIpMgmtLanUpnp
Enable/Disable the UPnP agent.
The value is stored in non-vol and is disabled after factory default for the primary SSID.
The UPnP agents for additional networks are enabled by default.
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.1429.79.2.3.2.1.13
saRgIpMgmtLanDhcpOption43
If option 60 is set from the CPE then return this value in option 43 of the DHCP Reply.
If this value is null then do not reply with option 43 (default is null)
This MIB will apply to the Primary SSID (intface .32) only
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.1429.79.2.3.2.1.14
.1.3.6.1.4.1.1429.79.2.3.3 · 1 row entry · 3 columns
Networks on the LAN side.
Stored in non-vol. .10-.128 for primary BSS
after factory reset.
saRgIpMgmtLanDhcpServerEntry entry .1.3.6.1.4.1.1429.79.2.3.3.1
List of networks on the LAN side.
Indexes
IF-MIBifIndex
Column Syntax OID
saRgIpMgmtLanDhcpServerPoolStart
The start of range LAN Trans IP Addresses. The type of
this address is specified by saRgIpMgmtLanDhcpServerPoolStartType.
Default value depends on IP network and subnet.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.1429.79.2.3.3.1.2
saRgIpMgmtLanDhcpServerPoolEnd
The end of range for LAN-Trans IP Addresses. The type of
this address is specified by saRgIpMgmtLanDhcpServerPoolEndType.
Default value depends on IP network and subnet.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.1429.79.2.3.3.1.4
saRgIpMgmtLanDhcpServerLeaseTime
The PS MUST provide the value of this MIB object in the
Option 51 (IP Address lease time) of the DHCP OFFER and
ACK messages sent to the LAN IP Device.
secondsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1429.79.2.3.3.1.5
.1.3.6.1.4.1.1429.79.2.3.4 · 1 row entry · 8 columns
IP addresses of devices served by DHCP servers.
saRgIpMgmtLanAddrEntry entry .1.3.6.1.4.1.1429.79.2.3.4.1
List of general parameters pertaining to LAN-Trans IP
address reservations and leases.
Indexes
IF-MIBifIndex saRgIpMgmtLanAddrIndex
Column Syntax OID
saRgIpMgmtLanAddrIndex
The index of the the LAN IP Device in the LAN-Trans Realm.
Integer32
Constraints:
range: 1-128
.1.3.6.1.4.1.1429.79.2.3.4.1.1
saRgIpMgmtLanAddrIp SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.1429.79.2.3.4.1.3
saRgIpMgmtLanAddrPhysAddr
The client's (i.e., LAN IP Device's) hardware address as
indicated in the chaddr field of its DHCP REQUEST message.
SNMPv2-TCPhysAddress
Textual Convention: SNMPv2-TCPhysAddress OctetString
.1.3.6.1.4.1.1429.79.2.3.4.1.4
saRgIpMgmtLanAddrLeaseCreateTime
This is the date and time when the LAN IP lease was
created (if it has not yet been renewed) or last renewed.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
.1.3.6.1.4.1.1429.79.2.3.4.1.5
saRgIpMgmtLanAddrLeaseExpireTime
This is the date and time when the LAN IP address lease
expired or will expire.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
.1.3.6.1.4.1.1429.79.2.3.4.1.6
saRgIpMgmtLanAddrHostName
This is the Host Name of the LAN IP address, based on DCHP
option 12.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.1429.79.2.3.4.1.7
saRgIpMgmtLanAddrClientId
This is the Client Class Identifier, based on DHCP option 60.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.1429.79.2.3.4.1.8
saRgIpMgmtLanAddrInterface
This will show the associated interface (LAN, WiFi or MoCA) of the connected CPE.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.1429.79.2.3.4.1.9
.1.3.6.1.4.1.1429.79.2.3.5 · 1 row entry · 1 columns
This table contains the IP addresses of cable network and
Internet DNS servers, in the order of preference in which
the PS's CNP will query them, when it cannot resolve a DNS
query using local information. Entries in this table are
updated with the information contained in DHCP Option 6,
received during both the WAN-Man and WAN-Data IP
acquisition processes.
Stored in non-vol and 0.0.0.0 for all servers after
factory reset.
saRgIpMgmtDnsServerEntry entry .1.3.6.1.4.1.1429.79.2.3.5.1
List of cable network and Internet DNS servers.
Indexes
saRgIpMgmtDnsServerOrder
Column Syntax OID
saRgIpMgmtDnsServerIp
This parameter indicates the IP address of a WAN DNS
server.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.1429.79.2.3.5.1.3
.1.3.6.1.4.1.1429.79.2.3.6 · 1 row entry · 5 columns
Fixed IP address assignments for DHCP server.
Table does not return any row if DHCP disabled.
The value for primary BSS is stored in non-vol.
saRgIpMgmtDhcpFixedIpEntry entry .1.3.6.1.4.1.1429.79.2.3.6.1
List of general parameters pertaining to LAN-Trans IP
address reservations and leases.
Indexes
IF-MIBifIndex saRgIpMgmtDhcpFixedIpIndex
Column Syntax OID
saRgIpMgmtDhcpFixedIpIndex
The index of the the LAN IP Device in the LAN-Trans Realm.
Integer32
Constraints:
range: 1-16
.1.3.6.1.4.1.1429.79.2.3.6.1.1
saRgIpMgmtDhcpFixedIpRowStatus
The row status. A row can be destroyed.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.1429.79.2.3.6.1.2
saRgIpMgmtDhcpFixedIpAddress SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.1429.79.2.3.6.1.4
saRgIpMgmtDhcpFixedIpPhysAddr
The client's (i.e., LAN IP Device's) hardware address as
indicated in the chaddr field of its DHCP REQUEST message.
SNMPv2-TCPhysAddressr/w
Textual Convention: SNMPv2-TCPhysAddress OctetString
.1.3.6.1.4.1.1429.79.2.3.6.1.5
saRgIpMgmtDhcpFixedIpHostName
This is the Host Name of the LAN IP address, based on DCHP
option 12.
OctetStringr/w
Constraints:
range: 0-80
.1.3.6.1.4.1.1429.79.2.3.6.1.6
.1.3.6.1.4.1.1429.79.2.3.8 · 1 row entry · 6 columns
Static route entries in the routing table.
This table is saved in non-vol and is empty
after factory reset.
saRgIpMgmtStaticRouteEntry entry .1.3.6.1.4.1.1429.79.2.3.8.1
List of static route entries in the routing table.
Indexes
saRgIpMgmtStaticRouteIndex
Column Syntax OID
saRgIpMgmtStaticRouteIndex
The index of the the table.
Integer32
Constraints:
range: 1-16
.1.3.6.1.4.1.1429.79.2.3.8.1.1
saRgIpMgmtStaticRouteRowStatus
The row status.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.1429.79.2.3.8.1.2
saRgIpMgmtStaticRouteNetwork
Static route IP network definition
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.1429.79.2.3.8.1.3
saRgIpMgmtStaticRouteSubnetMask
Static route network mask definition
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.1429.79.2.3.8.1.4
saRgIpMgmtStaticRouteGateway
Gateway to the network defined in
saRgIpMgmtStaticRouteNetwork and
saRgIpMgmtStaticRouteSubnetMask.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.1429.79.2.3.8.1.5
saRgIpMgmtStaticRouteRipAdvertise
If set to true(1), then static route entry
will be advertised in RIP.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.1429.79.2.3.8.1.6
.1.3.6.1.4.1.1429.79.2.3.11 · 1 row entry · 5 columns
Additional IP addresses for primary LAN interface.
If RIP is enabled, all subnets are advertised.
All objects are stored in non-vol. The table
is empty after factory reset.
saRgIpMgmtLanExtraSubnetEntry entry .1.3.6.1.4.1.1429.79.2.3.11.1
List of networks on the LAN side.
Indexes
IF-MIBifIndex
Column Syntax OID
saRgIpMgmtLanExtraSubnetIndex
Indicates the instance of this table row.
Enumeration
Enumerated Values:
1secondSubnet
2thirdSubnet
3fourthSubnet
.1.3.6.1.4.1.1429.79.2.3.11.1.1
saRgIpMgmtLanExtraSubnetRowStatus
The row status.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.1429.79.2.3.11.1.2
saRgIpMgmtLanExtraSubnetIpAddress SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.1429.79.2.3.11.1.3
saRgIpMgmtLanExtraSubnetSubnetMask SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.1429.79.2.3.11.1.4
saRgIpMgmtLanExtraSubnetGateway SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.1429.79.2.3.11.1.5
.1.3.6.1.4.1.1429.79.2.3.13.1 · 1 row entry · 2 columns
Table to control the mode for each LAN PORT.
LAN PORTs are numbered 1-4 and are mapped to physical
port location. Each port can either be in router or
in bridge mode.
saRgIpMgmtLanPortControlEntry entry .1.3.6.1.4.1.1429.79.2.3.13.1.1
Indexes
saRgIpMgmtLanPortControlIndex
Column Syntax OID
saRgIpMgmtLanPortControlIndex
The index for each LAN port
Integer32
Constraints:
range: 1-4
.1.3.6.1.4.1.1429.79.2.3.13.1.1.1
saRgIpMgmtLanPortMode
Each physical LAN port can either be controlled
as bridge or router. The saRgIpMgmtLanPortMode MIB only works
when SaRgIpMgmtLanMode.32=4(Mixed). Setting this MIB
through SNMP will take effect only after
saRgIpMgmtApply…
Enumerationr/w
Enumerated Values:
1bridge
2router
.1.3.6.1.4.1.1429.79.2.3.13.1.1.2
.1.3.6.1.4.1.1429.79.2.4.4.1 · 1 row entry · 6 columns
This table is stored in non-vol and is empty
after factory reset.
saRgFirewallReportEventEntry entry .1.3.6.1.4.1.1429.79.2.4.4.1.1
Indexes
saRgFirewallReportEventIndex
Column Syntax OID
saRgFirewallReportEventIndex
The index
Integer32
Constraints:
range: 1-64
.1.3.6.1.4.1.1429.79.2.4.4.1.1.1
saRgFirewallReportEventDescription SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.1429.79.2.4.4.1.1.2
saRgFirewallReportEventCount SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.1429.79.2.4.4.1.1.3
saRgFirewallReportEventLastOccurance SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.1429.79.2.4.4.1.1.4
saRgFirewallReportEventTarget SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.1429.79.2.4.4.1.1.5
saRgFirewallReportEventSource SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.1429.79.2.4.4.1.1.6
.1.3.6.1.4.1.1429.79.2.4.5.1 · 1 row entry · 4 columns
This table is stored in non-vol and is empty
after factory reset.
saRgFirewallIpFilterEntry entry .1.3.6.1.4.1.1429.79.2.4.5.1.1
Indexes
saRgFirewallIpFilterIndex
Column Syntax OID
saRgFirewallIpFilterIndex
The index
Integer32
Constraints:
range: 1-10
.1.3.6.1.4.1.1429.79.2.4.5.1.1.1
saRgFirewallIpFilterRowStatus
The row status. A row can be destroyed.
If the row is not used, set to notInService.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.1429.79.2.4.5.1.1.2
saRgFirewallIpFilterAddressStart SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.1429.79.2.4.5.1.1.3
saRgFirewallIpFilterAddressEnd SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.1429.79.2.4.5.1.1.4
.1.3.6.1.4.1.1429.79.2.4.5.2 · 1 row entry · 5 columns
This table is stored in non-vol and is empty
after factory reset.
saRgFirewallPortFilterEntry entry .1.3.6.1.4.1.1429.79.2.4.5.2.1
Indexes
saRgFirewallPortFilterIndex
Column Syntax OID
saRgFirewallPortFilterIndex
The index
Integer32
Constraints:
range: 1-10
.1.3.6.1.4.1.1429.79.2.4.5.2.1.1
saRgFirewallPortFilterRowStatus
The row status. A row can be destroyed.
If the row is not used, set to notInService.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.1429.79.2.4.5.2.1.2
saRgFirewallPortFilterPortStart INET-ADDRESS-MIBInetPortNumberr/w
Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.1429.79.2.4.5.2.1.5
saRgFirewallPortFilterPortEnd INET-ADDRESS-MIBInetPortNumberr/w
Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.1429.79.2.4.5.2.1.6
saRgFirewallPortFilterProto
IP protocol to block.
Enumerationr/w
Enumerated Values:
1udp
2tcp
3udpTcp
.1.3.6.1.4.1.1429.79.2.4.5.2.1.7
.1.3.6.1.4.1.1429.79.2.4.5.3 · 1 row entry · 3 columns
A table of clients MAC addresses that are denied from accessing Internet.
saRgFirewallMacFilterEntry entry .1.3.6.1.4.1.1429.79.2.4.5.3.1
A row in the table that specifies a single station MAC address.
Indexes
saRgFirewallMacFilterIndex
Column Syntax OID
saRgFirewallMacFilterIndex
The index
Integer32
Constraints:
range: 1-20
.1.3.6.1.4.1.1429.79.2.4.5.3.1.1
saRgFirewallMacFilterRowStatus
The row status. A row can be destroyed.
If the row is not used, set to notInService.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.1429.79.2.4.5.3.1.2
saRgFirewallMacFilterAddress
A MAC address of a station that cannot access Internet.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
.1.3.6.1.4.1.1429.79.2.4.5.3.1.3
.1.3.6.1.4.1.1429.79.2.4.6 · 1 row entry · 8 columns
This table is stored in non-vol and is empty
after factory reset.
saRgFirewallPortFwdEntry entry .1.3.6.1.4.1.1429.79.2.4.6.1
Indexes
saRgFirewallPortFwdIndex
Column Syntax OID
saRgFirewallPortFwdIndex
The index
Integer32
Constraints:
range: 1-30
.1.3.6.1.4.1.1429.79.2.4.6.1.1
saRgFirewallPortFwdRowStatus
The row status. A row can be destroyed.
If the row is not used, set to notInService.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.1429.79.2.4.6.1.2
saRgFirewallPortFwdToAddress
Valid address must be entered for a row to be created.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.1429.79.2.4.6.1.3
saRgFirewallPortFwdPortStart
Valid port must be entered for a row to be created.
INET-ADDRESS-MIBInetPortNumberr/w
Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.1429.79.2.4.6.1.4
saRgFirewallPortFwdPortEnd
Valid port must be entered for a row to be created.
INET-ADDRESS-MIBInetPortNumberr/w
Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.1429.79.2.4.6.1.5
saRgFirewallPortFwdProto Enumerationr/w
Enumerated Values:
1udp
2tcp
3udpTcp
.1.3.6.1.4.1.1429.79.2.4.6.1.6
saRgFirewallPortFwdExternalPortStart
Valid port must be entered for a row to be created. This is the outside-facing start port for the portforward.
INET-ADDRESS-MIBInetPortNumberr/w
Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.1429.79.2.4.6.1.8
saRgFirewallPortFwdExternalPortEnd
Valid port must be entered for a row to be created. This is the outside-facing end port for the portforward.
INET-ADDRESS-MIBInetPortNumberr/w
Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.1429.79.2.4.6.1.9
.1.3.6.1.4.1.1429.79.2.4.7 · 1 row entry · 7 columns
This table is stored in non-vol and is empty
after factory reset.
saRgFirewallPortTrigEntry entry .1.3.6.1.4.1.1429.79.2.4.7.1
Indexes
saRgFirewallPortTrigIndex
Column Syntax OID
saRgFirewallPortTrigIndex
The index
Integer32
Constraints:
range: 1-10
.1.3.6.1.4.1.1429.79.2.4.7.1.1
saRgFirewallPortTrigRowStatus
The row status. A row can be destroyed.
If the row is not used, set to notInService.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.1429.79.2.4.7.1.2
saRgFirewallPortTrigTriggerPortStart INET-ADDRESS-MIBInetPortNumberr/w
Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.1429.79.2.4.7.1.3
saRgFirewallPortTrigTriggerPortEnd INET-ADDRESS-MIBInetPortNumberr/w
Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.1429.79.2.4.7.1.4
saRgFirewallPortTrigTargetPortStart INET-ADDRESS-MIBInetPortNumberr/w
Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.1429.79.2.4.7.1.5
saRgFirewallPortTrigTargetPortEnd INET-ADDRESS-MIBInetPortNumberr/w
Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.1429.79.2.4.7.1.6
saRgFirewallPortTrigProto Enumerationr/w
Enumerated Values:
1udp
2tcp
3udpTcp
.1.3.6.1.4.1.1429.79.2.4.7.1.7