saRgDot11BssSecurityMode – SA-RG-MIB

Object

column r/w Enumeration

Secrity for BSS.
Beacause WPA2 is backwords compatible with WPA, setting this
object to wpaWpa2Psk(7) is allowed and has the same effect as
setting to wpa2Psk(3). The same is true for wpaWpa2Enterprise(8)
and wpa2Enterprise(5).
The value for primary BSS is stored in non-vol and is wpaWpa2Psk(7)
after factory reset.
For each other BSS security has to be included in configuration
file or the BSS will be disabled.

Context

MIB: SA-RG-MIB
OID: .1.3.6.1.4.1.1429.79.2.2.2.1.1.4
Type: column
Access: readwrite
Status: current
Parent: saRgDot11BssEntry
Table: saRgDot11BssTable
Siblings: 10

Syntax

Enumeration

Values & Constraints

Enumerated Values

`0`	disabled
`1`	wep
`2`	wpaPsk
`3`	wpa2Psk
`4`	wpaEnterprise
`5`	wpa2Enterprise
`7`	wpaWpa2Psk
`8`	wpaWpa2Enterprise

Related Objects

Sibling Objects

Object	Type	Syntax	OID
saRgDot11BssId Returns the BSSID	column	SNMPv2-TCPhysAddress	`.1.3.6.1.4.1.1429.79.2.2.2.1.1.1`
saRgDot11BssMaxNumSta This object defines the maximum number of STAs that can connect to this SSID. Note that the maximum number of STA accross all SSIDs in the AP is 128. Default value is 128 for all …	column	Integer32	`.1.3.6.1.4.1.1429.79.2.2.2.1.1.11`
saRgDot11BssUserStatus Provides the BSS Id Web UI or Wireless ON/OFF (if exist) status that is set by the user. If the user can press the Wireless ON/OFF (if exist) button and its status can be seen in …	column	Enumeration	`.1.3.6.1.4.1.1429.79.2.2.2.1.1.13`
saRgDot11BssApIsolation This MIB is only available in D3.0 products. AP Isolation (Access Point Isolation) allows you to isloate traffic between CPEs on the same Wifi SSID. This allows a measure of secur…	column	Enumeration	`.1.3.6.1.4.1.1429.79.2.2.2.1.1.15`
saRgDot11BssSecSsidTrafficPriority This MIB is only available in D3.0 products and applicable for secondary SSID in hotspot environment. When disabled, all the traffic to the secondary SSID in question would have s…	column	Enumeration	`.1.3.6.1.4.1.1429.79.2.2.2.1.1.16`
saRgDot11BssRejectPriSsidSta This MIB is only available in D3.0 products and applicable for secondary SSID in hotspot environment. By default, a private SSID STA can associate to hotspot SSID. This MIB can be…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.1429.79.2.2.2.1.1.17`
saRgDot11BssEnable Controls the BSS state. When set to enableOnline(3), the SSID is enabled only when the cable modem is online. When the modem changes state to offline, the AP will send dissasociat…	column	Enumeration	`.1.3.6.1.4.1.1429.79.2.2.2.1.1.2`
saRgDot11BssSsid Controls and reflects the service set identifier. The value of primary BSS is stored in non-vol and is empty after factory reset. If other BSS's SSID name is not defined, the BSS …	column	OctetString	`.1.3.6.1.4.1.1429.79.2.2.2.1.1.3`
saRgDot11BssClosedNetwork Controls whether the device will operate in closed network mode. If set to true(1), then the network mode is closed and the SSID will not be broadcast in beacon packets. If set …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.1429.79.2.2.2.1.1.5`
saRgDot11BssAccessMode Controls what stations will be given access to the device. If set to allowAny(0), then any station will be allowed to connect. If set to allowList(1), then only stations whose M…	column	Enumeration	`.1.3.6.1.4.1.1429.79.2.2.2.1.1.6`