saRgDot11BssEnable
SA-RG-MIB ·
.1.3.6.1.4.1.1429.79.2.2.2.1.1.2
Object
column
r/w
Enumeration
Controls the BSS state. When set to enableOnline(3), the SSID is enabled only when the cable modem is online. When the modem changes state to offline, the AP will send dissasociation messages to the STAs connected to the SSID and then disable. The value of primary BSS is stored in non-vol and is enabled(1) after factory reset. The other BSSs are disabled by default. If other BSS's SSID name is not defined, the BSS will not be enabled.
Context
- MIB
- SA-RG-MIB
- OID
.1.3.6.1.4.1.1429.79.2.2.2.1.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- saRgDot11BssEntry
- Table
- saRgDot11BssTable
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enable |
2 | disable |
3 | enableOnline |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| saRgDot11BssId Returns the BSSID | column | SNMPv2-TCPhysAddress | .1.3.6.1.4.1.1429.79.2.2.2.1.1.1 |
| saRgDot11BssMaxNumSta This object defines the maximum number of STAs that can connect to
this SSID. Note that the maximum number of STA accross all SSIDs in
the AP is 128.
Default value is 128 for all … | column | Integer32 | .1.3.6.1.4.1.1429.79.2.2.2.1.1.11 |
| saRgDot11BssUserStatus Provides the BSS Id Web UI or Wireless ON/OFF (if exist) status that
is set by the user. If the user can press the Wireless ON/OFF (if
exist) button and its status can be seen in … | column | Enumeration | .1.3.6.1.4.1.1429.79.2.2.2.1.1.13 |
| saRgDot11BssApIsolation This MIB is only available in D3.0 products.
AP Isolation (Access Point Isolation) allows you to isloate traffic between CPEs on
the same Wifi SSID. This allows a measure of secur… | column | Enumeration | .1.3.6.1.4.1.1429.79.2.2.2.1.1.15 |
| saRgDot11BssSecSsidTrafficPriority This MIB is only available in D3.0 products and applicable for secondary SSID in hotspot
environment. When disabled, all the traffic to the secondary SSID in question would have s… | column | Enumeration | .1.3.6.1.4.1.1429.79.2.2.2.1.1.16 |
| saRgDot11BssRejectPriSsidSta This MIB is only available in D3.0 products and applicable for secondary SSID in hotspot
environment. By default, a private SSID STA can associate to hotspot SSID. This MIB can be… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1429.79.2.2.2.1.1.17 |
| saRgDot11BssSsid Controls and reflects the service set identifier.
The value of primary BSS is stored in non-vol and is
empty after factory reset.
If other BSS's SSID name is not defined, the BSS
… | column | OctetString | .1.3.6.1.4.1.1429.79.2.2.2.1.1.3 |
| saRgDot11BssSecurityMode Secrity for BSS.
Beacause WPA2 is backwords compatible with WPA, setting this
object to wpaWpa2Psk(7) is allowed and has the same effect as
setting to wpa2Psk(3). The same is true… | column | Enumeration | .1.3.6.1.4.1.1429.79.2.2.2.1.1.4 |
| saRgDot11BssClosedNetwork Controls whether the device will operate in closed network mode. If
set to true(1), then the network mode is closed and the SSID will not
be broadcast in beacon packets. If set … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1429.79.2.2.2.1.1.5 |
| saRgDot11BssAccessMode Controls what stations will be given access to the device. If set to
allowAny(0), then any station will be allowed to connect. If set
to allowList(1), then only stations whose M… | column | Enumeration | .1.3.6.1.4.1.1429.79.2.2.2.1.1.6 |