saRgIpMgmtLanMode
SA-RG-MIB ·
.1.3.6.1.4.1.1429.79.2.3.2.1.1
Object
column
r/w
Enumeration
Defines the mode of operation for the device.
Setting this object via SNMP for the primary BSS will cause
the unit to reboot.
Setting this object via SNMP for the secondary BSSs will not
cause the unit to reboot.
The value for primary BSS is stored in non-vol and is router
after factory reset.
The default value for other BSSs is router.
This MIB supersedes saRgDeviceMode for the .32 interface.
l2tpv2-client(3)is obsoleted and NOT supported.
bridge(1): Sets individual interface to bridging mode
(for IPv6 interfaces DHCPv6 is external)
router(2): Sets individual interface to routing mode
(for IPv6 interfaces DHCPv6 is internal)
l2tpv2-client(3): <obsolete>
mixed(4): For mixed mode. This setting is applicable only to
.32 interface. This value is used on conjunction with
saRgIpMgmtLanPortControlTable
*Note: mixed(4) mode NOT Supported by DOCSIS 2.0 products.
vlan (5): Enables the vlan control feature.
See saRgVlanTable MIBs for VLAN configuration information.
Context
- MIB
- SA-RG-MIB
- OID
.1.3.6.1.4.1.1429.79.2.3.2.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- saRgIpMgmtLanEntry
- Table
- saRgIpMgmtLanTable
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | bridge |
2 | router |
3 | l2tpv2-client |
4 | mixed |
5 | vlan |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| saRgIpMgmtLanTypeOfService Definition of the TOS bits for the Network.
This object does not apply to primary BSS. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1429.79.2.3.2.1.10 |
| saRgIpMgmtLanDhcp125Option This option controls if the RG adds a Cisco specific
suboption (number 17) to DHCP DISCOVER and REQUEST
from the clients that are bridged on the BSS:
0: do not add the option
1: a… | column | Enumeration | .1.3.6.1.4.1.1429.79.2.3.2.1.11 |
| saRgIpMgmtLanUpnp Enable/Disable the UPnP agent.
The value is stored in non-vol and is disabled after factory default for the primary SSID.
The UPnP agents for additional networks are enabl… | column | Enumeration | .1.3.6.1.4.1.1429.79.2.3.2.1.13 |
| saRgIpMgmtLanDhcpOption43 If option 60 is set from the CPE then return this value in option 43 of the DHCP Reply.
If this value is null then do not reply with option 43 (default is null)
This MIB will appl… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.1429.79.2.3.2.1.14 |
| saRgIpMgmtLanNetwork The LAN-Trans network number.
Default for primary BSS is 192.168.0.0
Default for other BSSs is 192.168.ifIndex.0 | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1429.79.2.3.2.1.3 |
| saRgIpMgmtLanNetworksAllow Allows the user via the internal Web GUI (Lan Setup page
to input an IPv4 public or private Local IP address other than a
class C Private address (the default Network for the Prim… | column | Enumeration | .1.3.6.1.4.1.1429.79.2.3.2.1.4 |
| saRgIpMgmtLanSubnetMask The device MUST provide the value of this MIB
object in the Option 1 (Subnet Mask) of
DHCP OFFER and ACK messages sent to a LAN IP Device. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1429.79.2.3.2.1.5 |
| saRgIpMgmtLanGateway The type of this address is specified by
saRgIpMgmtLanNetwokRouterType. The PS MUST
provide the value of this MIB object in the
Option 3 (Router IP address) of the DHCP
OFFER and … | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1429.79.2.3.2.1.7 |
| saRgIpMgmtLanDhcpServer The value for primary BSS is stored in non-vol.
The default value for other BSSs is:
Enabled by default if interface is in router mode.
Always disabled if interface is in bridge m… | column | Enumeration | .1.3.6.1.4.1.1429.79.2.3.2.1.8 |
| saRgIpMgmtLanNapt The value for primary BSS is stored in non-vol.
The default value for other BSSs is:
Enabled by default if interface is in router mode.
Always disabled if interface is in bridge m… | column | Enumeration | .1.3.6.1.4.1.1429.79.2.3.2.1.9 |