RAD-RadShdsl-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
32

shdslEndpointCurrTable

table
.1.3.6.1.4.1.164.3.1.6.12.1 · 1 row entry · 9 columns
Open in standard view 
This table is an extension of hdsl2ShdslEndpointCurrTable of rfc4319
It contains current status and performance information
for segment endpoints in HDSL2/SHDSL Lines.  As with other
tables in this MIB indexed by ifIndex, entries in this table
MUST be maintained in a persistent manner.
shdslEndpointCurrEntry entry .1.3.6.1.4.1.164.3.1.6.12.1.1
An entry in the shdslEndpointCurrTable. Each entry
contains status and performance information relating to a
single segment endpoint. It is indexed by the ifIndex of the
HDSL2/SHDSL line, the UnitId of the associated …
Indexes
No indexes recorded
Column Syntax OID
hdsl2ShdslEndpointCurrRcvGain
The current receive gain in hundredth of dB.
dBSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.1.6.12.1.1.1
hdsl2ShdslEndpointCurrTransPower
The current transmit power in tenth of dBm.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.1.6.12.1.1.2
hdsl2ShdslEndpointCurrPowerBO
The current transceiver actual power backoff from 0dB to 31dB.
dBSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.1.6.12.1.1.3
hdsl2ShdslEndpointCurrLineStatus
The current line synchronization status.
Enumeration
Enumerated Values:
2noSync
3sync
 .1.3.6.1.4.1.164.3.1.6.12.1.1.4
hdsl2ShdslEndpointCurrOpState
The current operational state.
Bits
Enumerated Values:
0idleMode
1dataMode
2bootUpload
3bootUploadDone
4startupHandshakeInProgress
5startupTrainingInProgress
6framerSyncInProgress
7localAnalogLoopbackInProgress
8remoteCoreLoopbackInProgress
9localDigitalLoopbackInProgress
10spectrumTestInProgress
 .1.3.6.1.4.1.164.3.1.6.12.1.1.5
hdsl2ShdslEndpointAccumulatedTimeElapsed
The time (in hundredths of a second) since the
accumulated counters were last re-initialized:
Accumulated counters are hdsl2ShdslEndpointES,
hdsl2ShdslEndpointSES, hdsl2ShdslEndpointCRCanomalies
hdsl2ShdslEndpointLOSW…
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.12.1.1.6
hdsl2ShdslEndpointCurrPsd
This object indicates use of symmetric/asymmetric PSD (Power
Spectral Density) Mask for the associated SHDSL Line.
Enumeration
Enumerated Values:
2asymmetric
3symmetric
 .1.3.6.1.4.1.164.3.1.6.12.1.1.7
hdsl2ShdslEndpointValidIntervals
The number of previous 15 minutes intervals
for which valid data was collected.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.12.1.1.8
hdsl2ShdslEndpointValidDaysIntervals
The number of previous Days intervals
for which valid data was collected.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.12.1.1.9

shdslEndpointMaintTable

table
.1.3.6.1.4.1.164.3.1.6.12.2 · 1 row entry · 1 columns
Open in standard view 
This table supports maintenance operations (eg. loopbacks)
to be performed on HDSL2/SHDSL segment endpoints.  This table
contains live data from equipment.  As such, it is NOT
persistent.
shdslEndpointMaintEntry entry .1.3.6.1.4.1.164.3.1.6.12.2.1
An entry in the hdsl2ShdslEndpointMaintTable. Each entry
corresponds to a single segment endpoint, and is indexed by the
ifIndex of the HDSL2/SHDSL line, the UnitId of the associated
unit and the side of the unit.
Indexes
IF-MIBifIndex HDSL2-SHDSL-LINE-MIBhdsl2ShdslInvIndex HDSL2-SHDSL-LINE-MIBhdsl2ShdslEndpointSide
Column Syntax OID
shdslMaintPowerBackOff
This object configures the receiver at the associated
segment endpoint to operate in default or enhanced power
backoff mode.
powerbackoff may also be disabled
Enumerationr/w
Enumerated Values:
1default
2enhanced
3disabled
 .1.3.6.1.4.1.164.3.1.6.12.2.1.1

shdslSpanConfProfileTable

table
.1.3.6.1.4.1.164.3.1.6.12.3 · 1 row entry · 4 columns
Open in standard view 
This table supports definitions of span configuration
profiles for SHDSL lines.  HDSL2 does not support these 
configuration options.  This table MUST be maintained
in a persistent manner.
shdslSpanConfProfileEntry entry .1.3.6.1.4.1.164.3.1.6.12.3.1
Each entry corresponds to a single span configuration
profile. Each profile contains a set of span configuration
parameters. The configuration parameters in a profile are
applied to those lines referencing that profil…
Indexes
No indexes recorded
Column Syntax OID
hdsl2ShdslSpanConfEocCompatible
This object indicate if device supports only
standard EOC messages or also proprietary messages.
Enumeration
Enumerated Values:
2proprietary
3standard
 .1.3.6.1.4.1.164.3.1.6.12.3.1.1
hdsl2ShdslSpanConfAsymmetricPSDRate
This object indicates line rate when
rfc3276.hdsl2ShdslSpanConfPSD value is asymmetric(2).
Seleceted rate depends on transmission mode -
specified in Annex A or B of G.991.2.
For Annex A;
R1 selects the 776 or …
Enumerationr/w
Enumerated Values:
1notApplicable
2asymmetricR1
3asymmetricR2
 .1.3.6.1.4.1.164.3.1.6.12.3.1.2
hdsl2ShdslSpanConfWireInterfaceUsed
This object enable user to configure SHDSL port with 4 wires
to use 2 or 4 wires, or to auto detect far end number of wires
Enumerationr/w
Enumerated Values:
1notApplicable
2twoWires
3fourWires
4autoDetection
 .1.3.6.1.4.1.164.3.1.6.12.3.1.3
hdsl2ShdslSpanConfHandshake
This object indicates the Handshake Procedure.
Enumerationr/w
Enumerated Values:
1automatic
2g994dot1rev2001
 .1.3.6.1.4.1.164.3.1.6.12.3.1.4

hdsl2ShdslIfConfTable

table
.1.3.6.1.4.1.164.3.1.6.12.4.1 · 1 row entry · 18 columns
Open in standard view 
This table enables configuration of HDSL2/SHDSL interfaces
per configuration index.
Write operation for products supporting Active+Temp configurations,
is possible only on the Temp configuration(255).
hdsl2ShdslIfConfEntry entry .1.3.6.1.4.1.164.3.1.6.12.4.1.1
An entry in the hdsl2ShdslIfConfTable.
Indexes
hdsl2ShdslIfConfIdx IF-MIBifIndex hdsl2ShdslSideIdx
Column Syntax OID
hdsl2ShdslIfConfIdx
This object indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config.
Write operation for products supporting Active+Temp configurations,
is allowed to Temporary configuration…
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.164.3.1.6.12.4.1.1.1
hdsl2ShdslSideIdx
This object indicates the Side of the managed object: Near-End
or Far-End.
Enumeration
Enumerated Values:
2nearEnd
3farEnd
4rptr1
5rptr2
6rptr3
7rptr4
8rptr5
9rptr6
10rptr7
11rptr8
 .1.3.6.1.4.1.164.3.1.6.12.4.1.1.2
hdsl2ShdslMaxBw
Maximum BW (Bandwidth) of the Shdsl Line, in Kbps units.
Respective Max No. of TSs = Max. Rate/64
This object can be Set only for a Central (xtuC) unit.
Enumerationr/w
Enumerated Values:
1notApplicable
2r192
3r256
4r320
5r384
6r448
7r512
8r576
9r640
10r704
11r768
12r832
13r896
14r960
15r1024
16r1088
17r1152
18r1216
19r1280
20r1344
21r1408
22r1472
23r1536
24r1600
25r1664
26r1728
27r1792
28r1856
29r1920
30r1984
31r2048
 .1.3.6.1.4.1.164.3.1.6.12.4.1.1.3
hdsl2ShdslPwrBackoff
This object configures the receiver at the associated
segment endpoint to enable/disable power backoff mode.
This object is similar to hdsl2ShdslMaintPowerBackOff, but per
configuration. Therefore, the order of the enum…
Enumerationr/w
Enumerated Values:
1notApplicable
2enhanced
3disabled
 .1.3.6.1.4.1.164.3.1.6.12.4.1.1.4
hdsl2ShdslTxMode
This object configures the Transmission Mode for the SHDSL Line.
Normally, This object can be Set only for a Central (xtuC) unit.
Enumerationr/w
Enumerated Values:
1notApplicable
2annexA
3annexB
4annexG
5annexF
 .1.3.6.1.4.1.164.3.1.6.12.4.1.1.5
hdsl2ShdslAttenuationThreshold
This object configures the Attentuation alarm threshold.
0=Off
Valid values: 0..127 .
dBSNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.1.6.12.4.1.1.6
hdsl2ShdslSnrMarginThreshold
This object configures the SNR margin alarm threshold.
0=Off
Valid values: 0..15 .
dBSNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.1.6.12.4.1.1.7
hdsl2ShdslTs0OverDsl
This object configures the way TS0 will be treated over the SHDSL Line.
looped - looped inside
transparent - sent transparently over the DSL Line.
This object can be Set only for a Central (xtuC) unit.
Enumerationr/w
Enumerated Values:
1notApplicable
2looped
3transparent
 .1.3.6.1.4.1.164.3.1.6.12.4.1.1.8
hdsl2ShdslMode
This object is relevant only for the Near-End device.
stuC - Central
stuR - Remote .
Enumerationr/w
Enumerated Values:
1notApplicable
2stuC
3stuR
 .1.3.6.1.4.1.164.3.1.6.12.4.1.1.9
hdsl2ShdslTsCompactionMode
This object configures how TSs will be compacted over the SHDSL Line.
In both mapping cases (2),(3), only the TSs connected on the E1 line will be
transferred over the SHDSL Line
noCompaction - the whole E1 BW is reser…
Enumerationr/w
Enumerated Values:
1noCompaction
2noMapping
3withMapping
4lowTsMapping
5spareMapping
 .1.3.6.1.4.1.164.3.1.6.12.4.1.1.10
hdsl2ShdslEocEnable
This object configures whether EOC protocol is supported by the Far-End
device working with this port.
Enumerationr/w
Enumerated Values:
1notApplicable
2no
3yes
 .1.3.6.1.4.1.164.3.1.6.12.4.1.1.11
hdsl2ShdslFar1stIfNumOfTSs
This object configures the number of TSs of the SHDSL line
that belong to the 1st Interface of the Far-End device, where
1st means that these TSs are first on the SHDSL line.

It is applicable only for N…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.12.4.1.1.12
hdsl2ShdslFarEndDevice
This object indicates the Far-End device.
It is used for 2 purposes:
- in order to know if EOC is used (EOC is used only when the device
is any of the ASMi52 options: (4)..(7))
- in order to know how to work vs Far-En…
Enumerationr/w
Enumerated Values:
2other
3mpComponent
4asmi52SingleIf
5asmi52E1AndData
6asmi52E1AndEth
7asmi52EthAndData
8fcdip
9dxc
 .1.3.6.1.4.1.164.3.1.6.12.4.1.1.13
hdsl2ShdslPwrBackoffDb
This object configures the Power Backoff (in dB) of the
receiver, at the associated segment endpoint.
0=Off
Valid values: 0..31 .
dBSNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.1.6.12.4.1.1.14
hdsl2ShdslFarEndMuxTsa
This object represents Assignment of E1 TSs to Far-End MUX Interfaces.
It is relevant only when hdsl2ShdslSideIdx=nearEnd(2), when for the
Near-End device, hdsl2ShdslMode=stuC(2)AND hdsl2ShdslFarEndDevice=(5),(6)or(7).…
OctetStringr/w .1.3.6.1.4.1.164.3.1.6.12.4.1.1.15
hdsl2ShdslLineProbeEnable
This object enables/disables support for Line Probe of
the units in an SHDSL line. When Line Probe is enabled, the
system performs Line Probing to find the best possible
rate. If Line Probe is disabled, the rate adapt…
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.164.3.1.6.12.4.1.1.16
hdsl2ShdslClockMode
This object enables configuration of the clock mode.
(1) - 1 Plesiochronous (e.g. ASMi-52 / ASMi-54L)
(2) - 2 Plesiochronous with timing reference (e.g. ASMi-54 / ASMi-54L)
(3) - 3a - Synchronous
(4) - 3b - Hybrid: down…
Enumerationr/w
Enumerated Values:
1plesiochronous1
2plesiochronousWithTimeReference2
3synchronous3a
4hybrid
 .1.3.6.1.4.1.164.3.1.6.12.4.1.1.17
hdsl2ShdslIfConfLinkDownReason Bits
Enumerated Values:
0unknown
1es
2ses
3crcAnomaly
4losw
5uas
6snrMarginAlarm
 .1.3.6.1.4.1.164.3.1.6.12.4.1.1.19