Standard view Table view

HDSL2-SHDSL-LINE-MIB

        This MIB module defines a collection of objects for managing
HDSL2/SHDSL lines.  An agent may reside at either end of the
line; however, the MIB module is designed to require no
management communication between the modems beyond that
inherent in the low-level EOC line protocol as defined in
ANSI T1E1.4/2000-006 (for HDSL2 lines) or in ITU G.991.2
(for SHDSL lines).
        
Copyright (C) The Internet Society (2005).  This version of
this MIB module is part of RFC 4319; see the RFC itself for
full legal notices.
hdsl2ShdslMIB 1.3.6.1.2.1.10.48
Imported Objects
IF-MIB ifIndex
PerfHist-TC-MIB PerfCurrentCount PerfIntervalCount
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI Counter32 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE transmission Unsigned32
SNMPv2-TC RowStatus TEXTUAL-CONVENTION
Type Definitions (9)
Hdsl2Shdsl1DayIntervalCount Unsigned32
Hdsl2ShdslClockReferenceType Enumeration
localClk(1)
networkClk(2)
dataOrNetworkClk(3)
dataClk(4)
Hdsl2ShdslPerfCurrDayCount Unsigned32
Hdsl2ShdslPerfIntervalThreshold Unsigned32 range: 0..900
Hdsl2ShdslPerfTimeElapsed Unsigned32 range: 0..86399
Hdsl2ShdslTransmissionModeType Bits
region1(0)
region2(1)
Hdsl2ShdslUnitId Enumeration
xtuC(1)
xtuR(2)
xru1(3)
xru2(4)
xru3(5)
xru4(6)
xru5(7)
xru6(8)
xru7(9)
xru8(10)
Hdsl2ShdslUnitSide Enumeration
networkSide(1)
customerSide(2)
Hdsl2ShdslWirePair Enumeration
wirePair1(1)
wirePair2(2)
wirePair3(3)
wirePair4(4)
Objects (118)
hdsl2ShdslMIB .1.3.6.1.2.1.10.48
hdsl2ShdslNotifications .1.3.6.1.2.1.10.48.0
hdsl2ShdslMibObjects .1.3.6.1.2.1.10.48.1
hdsl2ShdslSpanConfTable .1.3.6.1.2.1.10.48.1.1
hdsl2ShdslSpanConfEntry IF-MIBifIndex .1.3.6.1.2.1.10.48.1.1.1
hdsl2ShdslSpanConfNumRepeaters r/w repeatersUnsigned32 .1.3.6.1.2.1.10.48.1.1.1.1
hdsl2ShdslSpanConfProfile r/w OctetString .1.3.6.1.2.1.10.48.1.1.1.2
hdsl2ShdslSpanConfAlarmProfile r/w OctetString .1.3.6.1.2.1.10.48.1.1.1.3
hdsl2ShdslSpanConfProfileTable .1.3.6.1.2.1.10.48.1.10
hdsl2ShdslSpanConfProfileEntry hdsl2ShdslSpanConfProfileName .1.3.6.1.2.1.10.48.1.10.1
hdsl2ShdslSpanConfProfileName OctetString .1.3.6.1.2.1.10.48.1.10.1.1
hdsl2ShdslSpanConfWorstCaseTargetMarginDown r/w dBInteger32 .1.3.6.1.2.1.10.48.1.10.1.10
hdsl2ShdslSpanConfCurrCondTargetMarginUp r/w dBInteger32 .1.3.6.1.2.1.10.48.1.10.1.11
hdsl2ShdslSpanConfWorstCaseTargetMarginUp r/w dBInteger32 .1.3.6.1.2.1.10.48.1.10.1.12
hdsl2ShdslSpanConfUsedTargetMargins r/w Bits .1.3.6.1.2.1.10.48.1.10.1.13
hdsl2ShdslSpanConfReferenceClock r/w Hdsl2ShdslClockReferenceType .1.3.6.1.2.1.10.48.1.10.1.14
hdsl2ShdslSpanConfLineProbeEnable r/w Enumeration .1.3.6.1.2.1.10.48.1.10.1.15
hdsl2ShdslSpanConfProfileRowStatus r/w SNMPv2-TCRowStatus .1.3.6.1.2.1.10.48.1.10.1.16
hdsl2ShdslSpanConfWireInterface r/w Enumeration .1.3.6.1.2.1.10.48.1.10.1.2
hdsl2ShdslSpanConfMinLineRate r/w bpsUnsigned32 .1.3.6.1.2.1.10.48.1.10.1.3
hdsl2ShdslSpanConfMaxLineRate r/w bpsUnsigned32 .1.3.6.1.2.1.10.48.1.10.1.4
hdsl2ShdslSpanConfPSD r/w Enumeration .1.3.6.1.2.1.10.48.1.10.1.5
hdsl2ShdslSpanConfTransmissionMode r/w Hdsl2ShdslTransmissionModeType .1.3.6.1.2.1.10.48.1.10.1.6
hdsl2ShdslSpanConfRemoteEnabled r/w Enumeration .1.3.6.1.2.1.10.48.1.10.1.7
hdsl2ShdslSpanConfPowerFeeding r/w Enumeration .1.3.6.1.2.1.10.48.1.10.1.8
hdsl2ShdslSpanConfCurrCondTargetMarginDown r/w dBInteger32 .1.3.6.1.2.1.10.48.1.10.1.9
hdsl2ShdslEndpointAlarmConfProfileTable .1.3.6.1.2.1.10.48.1.11
hdsl2ShdslEndpointAlarmConfProfileEntry hdsl2ShdslEndpointAlarmConfProfileName .1.3.6.1.2.1.10.48.1.11.1
hdsl2ShdslEndpointAlarmConfProfileName OctetString .1.3.6.1.2.1.10.48.1.11.1.1
hdsl2ShdslEndpointThreshLoopAttenuation r/w dBInteger32 .1.3.6.1.2.1.10.48.1.11.1.2
hdsl2ShdslEndpointThreshSNRMargin r/w dBInteger32 .1.3.6.1.2.1.10.48.1.11.1.3
hdsl2ShdslEndpointThreshES r/w secondsHdsl2ShdslPerfIntervalThreshold .1.3.6.1.2.1.10.48.1.11.1.4
hdsl2ShdslEndpointThreshSES r/w secondsHdsl2ShdslPerfIntervalThreshold .1.3.6.1.2.1.10.48.1.11.1.5
hdsl2ShdslEndpointThreshCRCanomalies r/w detected CRC AnomaliesInteger32 .1.3.6.1.2.1.10.48.1.11.1.6
hdsl2ShdslEndpointThreshLOSWS r/w secondsHdsl2ShdslPerfIntervalThreshold .1.3.6.1.2.1.10.48.1.11.1.7
hdsl2ShdslEndpointThreshUAS r/w secondsHdsl2ShdslPerfIntervalThreshold .1.3.6.1.2.1.10.48.1.11.1.8
hdsl2ShdslEndpointAlarmConfProfileRowStatus r/w SNMPv2-TCRowStatus .1.3.6.1.2.1.10.48.1.11.1.9
hdsl2ShdslSpanStatusTable .1.3.6.1.2.1.10.48.1.2
hdsl2ShdslSpanStatusEntry IF-MIBifIndex .1.3.6.1.2.1.10.48.1.2.1
hdsl2ShdslStatusNumAvailRepeaters Unsigned32 .1.3.6.1.2.1.10.48.1.2.1.1
hdsl2ShdslStatusMaxAttainableLineRate bpsUnsigned32 .1.3.6.1.2.1.10.48.1.2.1.2
hdsl2ShdslStatusActualLineRate bpsUnsigned32 .1.3.6.1.2.1.10.48.1.2.1.3
hdsl2ShdslStatusTransmissionModeCurrent Hdsl2ShdslTransmissionModeType .1.3.6.1.2.1.10.48.1.2.1.4
hdsl2ShdslStatusMaxAttainablePayloadRate bpsUnsigned32 .1.3.6.1.2.1.10.48.1.2.1.5
hdsl2ShdslStatusActualPayloadRate bpsUnsigned32 .1.3.6.1.2.1.10.48.1.2.1.6
hdsl2ShdslInventoryTable .1.3.6.1.2.1.10.48.1.3
hdsl2ShdslInventoryEntry IF-MIBifIndexhdsl2ShdslInvIndex .1.3.6.1.2.1.10.48.1.3.1
hdsl2ShdslInvIndex Hdsl2ShdslUnitId .1.3.6.1.2.1.10.48.1.3.1.1
hdsl2ShdslInvEquipmentCode OctetString .1.3.6.1.2.1.10.48.1.3.1.10
hdsl2ShdslInvVendorOther OctetString .1.3.6.1.2.1.10.48.1.3.1.11
hdsl2ShdslInvTransmissionModeCapability Hdsl2ShdslTransmissionModeType .1.3.6.1.2.1.10.48.1.3.1.12
hdsl2ShdslInvVendorID OctetString .1.3.6.1.2.1.10.48.1.3.1.2
hdsl2ShdslInvVendorModelNumber OctetString .1.3.6.1.2.1.10.48.1.3.1.3
hdsl2ShdslInvVendorSerialNumber OctetString .1.3.6.1.2.1.10.48.1.3.1.4
hdsl2ShdslInvVendorEOCSoftwareVersion Integer32 .1.3.6.1.2.1.10.48.1.3.1.5
hdsl2ShdslInvStandardVersion Integer32 .1.3.6.1.2.1.10.48.1.3.1.6
hdsl2ShdslInvVendorListNumber OctetString .1.3.6.1.2.1.10.48.1.3.1.7
hdsl2ShdslInvVendorIssueNumber OctetString .1.3.6.1.2.1.10.48.1.3.1.8
hdsl2ShdslInvVendorSoftwareVersion OctetString .1.3.6.1.2.1.10.48.1.3.1.9
hdsl2ShdslEndpointConfTable .1.3.6.1.2.1.10.48.1.4
hdsl2ShdslEndpointConfEntry IF-MIBifIndexhdsl2ShdslInvIndexhdsl2ShdslEndpointSidehdsl2ShdslEndpointWirePair .1.3.6.1.2.1.10.48.1.4.1
hdsl2ShdslEndpointSide Hdsl2ShdslUnitSide .1.3.6.1.2.1.10.48.1.4.1.1
hdsl2ShdslEndpointWirePair Hdsl2ShdslWirePair .1.3.6.1.2.1.10.48.1.4.1.2
hdsl2ShdslEndpointAlarmConfProfile r/w OctetString .1.3.6.1.2.1.10.48.1.4.1.3
hdsl2ShdslEndpointCurrTable .1.3.6.1.2.1.10.48.1.5
hdsl2ShdslEndpointCurrEntry IF-MIBifIndexhdsl2ShdslInvIndexhdsl2ShdslEndpointSidehdsl2ShdslEndpointWirePair .1.3.6.1.2.1.10.48.1.5.1
hdsl2ShdslEndpointCurrAtn dBInteger32 .1.3.6.1.2.1.10.48.1.5.1.1
hdsl2ShdslEndpointCurr15MinES secondsPerfHist-TC-MIBPerfCurrentCount .1.3.6.1.2.1.10.48.1.5.1.10
hdsl2ShdslEndpointCurr15MinSES secondsPerfHist-TC-MIBPerfCurrentCount .1.3.6.1.2.1.10.48.1.5.1.11
hdsl2ShdslEndpointCurr15MinCRCanomalies detected CRC AnomaliesPerfHist-TC-MIBPerfCurrentCount .1.3.6.1.2.1.10.48.1.5.1.12
hdsl2ShdslEndpointCurr15MinLOSWS secondsPerfHist-TC-MIBPerfCurrentCount .1.3.6.1.2.1.10.48.1.5.1.13
hdsl2ShdslEndpointCurr15MinUAS secondsPerfHist-TC-MIBPerfCurrentCount .1.3.6.1.2.1.10.48.1.5.1.14
hdsl2ShdslEndpointCurr1DayTimeElapsed secondsHdsl2ShdslPerfTimeElapsed .1.3.6.1.2.1.10.48.1.5.1.15
hdsl2ShdslEndpointCurr1DayES secondsHdsl2ShdslPerfCurrDayCount .1.3.6.1.2.1.10.48.1.5.1.16
hdsl2ShdslEndpointCurr1DaySES secondsHdsl2ShdslPerfCurrDayCount .1.3.6.1.2.1.10.48.1.5.1.17
hdsl2ShdslEndpointCurr1DayCRCanomalies detected CRC AnomaliesHdsl2ShdslPerfCurrDayCount .1.3.6.1.2.1.10.48.1.5.1.18
hdsl2ShdslEndpointCurr1DayLOSWS secondsHdsl2ShdslPerfCurrDayCount .1.3.6.1.2.1.10.48.1.5.1.19
hdsl2ShdslEndpointCurrSnrMgn dBInteger32 .1.3.6.1.2.1.10.48.1.5.1.2
hdsl2ShdslEndpointCurr1DayUAS secondsHdsl2ShdslPerfCurrDayCount .1.3.6.1.2.1.10.48.1.5.1.20
hdsl2ShdslEndpointCurrTipRingReversal Enumeration .1.3.6.1.2.1.10.48.1.5.1.21
hdsl2ShdslEndpointCurrActivationState Enumeration .1.3.6.1.2.1.10.48.1.5.1.22
hdsl2ShdslEndpointCurrStatus Bits .1.3.6.1.2.1.10.48.1.5.1.3
hdsl2ShdslEndpointES secondsSNMPv2-SMICounter32 .1.3.6.1.2.1.10.48.1.5.1.4
hdsl2ShdslEndpointSES secondsSNMPv2-SMICounter32 .1.3.6.1.2.1.10.48.1.5.1.5
hdsl2ShdslEndpointCRCanomalies detected CRC AnomaliesSNMPv2-SMICounter32 .1.3.6.1.2.1.10.48.1.5.1.6
hdsl2ShdslEndpointLOSWS secondsSNMPv2-SMICounter32 .1.3.6.1.2.1.10.48.1.5.1.7
hdsl2ShdslEndpointUAS secondsSNMPv2-SMICounter32 .1.3.6.1.2.1.10.48.1.5.1.8
hdsl2ShdslEndpointCurr15MinTimeElapsed secondsHdsl2ShdslPerfTimeElapsed .1.3.6.1.2.1.10.48.1.5.1.9
hdsl2Shdsl15MinIntervalTable .1.3.6.1.2.1.10.48.1.6
hdsl2Shdsl15MinIntervalEntry IF-MIBifIndexhdsl2ShdslInvIndexhdsl2ShdslEndpointSidehdsl2ShdslEndpointWirePairhdsl2Shdsl15MinIntervalNumber .1.3.6.1.2.1.10.48.1.6.1
hdsl2Shdsl15MinIntervalNumber Unsigned32 .1.3.6.1.2.1.10.48.1.6.1.1
hdsl2Shdsl15MinIntervalES secondsPerfHist-TC-MIBPerfIntervalCount .1.3.6.1.2.1.10.48.1.6.1.2
hdsl2Shdsl15MinIntervalSES secondsPerfHist-TC-MIBPerfIntervalCount .1.3.6.1.2.1.10.48.1.6.1.3
hdsl2Shdsl15MinIntervalCRCanomalies detected CRC AnomaliesPerfHist-TC-MIBPerfIntervalCount .1.3.6.1.2.1.10.48.1.6.1.4
hdsl2Shdsl15MinIntervalLOSWS secondsPerfHist-TC-MIBPerfIntervalCount .1.3.6.1.2.1.10.48.1.6.1.5
hdsl2Shdsl15MinIntervalUAS secondsPerfHist-TC-MIBPerfIntervalCount .1.3.6.1.2.1.10.48.1.6.1.6
hdsl2Shdsl1DayIntervalTable .1.3.6.1.2.1.10.48.1.7
hdsl2Shdsl1DayIntervalEntry IF-MIBifIndexhdsl2ShdslInvIndexhdsl2ShdslEndpointSidehdsl2ShdslEndpointWirePairhdsl2Shdsl1DayIntervalNumber .1.3.6.1.2.1.10.48.1.7.1
hdsl2Shdsl1DayIntervalNumber Unsigned32 .1.3.6.1.2.1.10.48.1.7.1.1
hdsl2Shdsl1DayIntervalMoniSecs secondsHdsl2ShdslPerfTimeElapsed .1.3.6.1.2.1.10.48.1.7.1.2
hdsl2Shdsl1DayIntervalES secondsHdsl2Shdsl1DayIntervalCount .1.3.6.1.2.1.10.48.1.7.1.3
hdsl2Shdsl1DayIntervalSES secondsHdsl2Shdsl1DayIntervalCount .1.3.6.1.2.1.10.48.1.7.1.4
hdsl2Shdsl1DayIntervalCRCanomalies detected CRC AnomaliesHdsl2Shdsl1DayIntervalCount .1.3.6.1.2.1.10.48.1.7.1.5
hdsl2Shdsl1DayIntervalLOSWS secondsHdsl2Shdsl1DayIntervalCount .1.3.6.1.2.1.10.48.1.7.1.6
hdsl2Shdsl1DayIntervalUAS secondsHdsl2Shdsl1DayIntervalCount .1.3.6.1.2.1.10.48.1.7.1.7
hdsl2ShdslEndpointMaintTable .1.3.6.1.2.1.10.48.1.8
hdsl2ShdslEndpointMaintEntry IF-MIBifIndexhdsl2ShdslInvIndexhdsl2ShdslEndpointSide .1.3.6.1.2.1.10.48.1.8.1
hdsl2ShdslMaintLoopbackConfig r/w Enumeration .1.3.6.1.2.1.10.48.1.8.1.1
hdsl2ShdslMaintTipRingReversal Enumeration .1.3.6.1.2.1.10.48.1.8.1.2
hdsl2ShdslMaintPowerBackOff r/w Enumeration .1.3.6.1.2.1.10.48.1.8.1.3
hdsl2ShdslMaintSoftRestart r/w Enumeration .1.3.6.1.2.1.10.48.1.8.1.4
hdsl2ShdslUnitMaintTable .1.3.6.1.2.1.10.48.1.9
hdsl2ShdslUnitMaintEntry IF-MIBifIndexhdsl2ShdslInvIndex .1.3.6.1.2.1.10.48.1.9.1
hdsl2ShdslMaintLoopbackTimeout r/w minutesInteger32 .1.3.6.1.2.1.10.48.1.9.1.1
hdsl2ShdslMaintUnitPowerSource Enumeration .1.3.6.1.2.1.10.48.1.9.1.2
hdsl2ShdslConformance .1.3.6.1.2.1.10.48.3
hdsl2ShdslGroups .1.3.6.1.2.1.10.48.3.1
hdsl2ShdslCompliances .1.3.6.1.2.1.10.48.3.2
Notifications / Traps (16)
NameOIDDescription
hdsl2ShdslLoopAttenCrossing
hdsl2ShdslEndpointCurrAtn hdsl2ShdslEndpointThreshLoopAttenuation
.1.3.6.1.2.1.10.48.0.1 
This notification indicates that the loop attenuation
threshold (as per the hdsl2ShdslEndpointThreshLoopAttenuation
value) has been reached/exceeded for the HDSL2/SHDSL segment
endpoint.
hdsl2ShdslpowerBackoff
hdsl2ShdslEndpointCurrStatus
.1.3.6.1.2.1.10.48.0.10 
This notification indicates that the bit setting for
powerBackoff in the hdsl2ShdslEndpointCurrStatus object for
this endpoint has changed.
hdsl2ShdsldeviceFault
hdsl2ShdslEndpointCurrStatus
.1.3.6.1.2.1.10.48.0.11 
This notification indicates that the bit setting for
deviceFault in the hdsl2ShdslEndpointCurrStatus object for
this endpoint has changed.
hdsl2ShdsldcContinuityFault
hdsl2ShdslEndpointCurrStatus
.1.3.6.1.2.1.10.48.0.12 
This notification indicates that the bit setting for
dcContinuityFault in the hdsl2ShdslEndpointCurrStatus object
for this endpoint has changed.
hdsl2ShdslconfigInitFailure
hdsl2ShdslEndpointCurrStatus
.1.3.6.1.2.1.10.48.0.13 
This notification indicates that the bit setting for
configInitFailure in the hdsl2ShdslEndpointCurrStatus object
for this endpoint has changed.
hdsl2ShdslprotocolInitFailure
hdsl2ShdslEndpointCurrStatus
.1.3.6.1.2.1.10.48.0.14 
This notification indicates that the bit setting for
protocolInitFailure in the hdsl2ShdslEndpointCurrStatus
object for this endpoint has changed.
hdsl2ShdslnoNeighborPresent
hdsl2ShdslEndpointCurrStatus
.1.3.6.1.2.1.10.48.0.15 
This notification indicates that the bit setting for
noNeighborPresent in the hdsl2ShdslEndpointCurrStatus object
for this endpoint has changed.
hdsl2ShdslLocalPowerLoss
hdsl2ShdslInvVendorID
.1.3.6.1.2.1.10.48.0.16 
This notification indicates impending unit failure due to
loss of local power (last gasp).
hdsl2ShdslSNRMarginCrossing
hdsl2ShdslEndpointCurrSnrMgn hdsl2ShdslEndpointThreshSNRMargin
.1.3.6.1.2.1.10.48.0.2 
This notification indicates that the SNR margin threshold (as
per the hdsl2ShdslEndpointThreshSNRMargin value) has been
reached/exceeded for the HDSL2/SHDSL segment endpoint.
hdsl2ShdslPerfESThresh
hdsl2ShdslEndpointCurr15MinES hdsl2ShdslEndpointThreshES
.1.3.6.1.2.1.10.48.0.3 
This notification indicates that the errored seconds
threshold (as per the hdsl2ShdslEndpointThreshES value)
has been reached/exceeded for the HDSL2/SHDSL segment
endpoint.
hdsl2ShdslPerfSESThresh
hdsl2ShdslEndpointCurr15MinSES hdsl2ShdslEndpointThreshSES
.1.3.6.1.2.1.10.48.0.4 
This notification indicates that the severely errored seconds
threshold (as per the hdsl2ShdslEndpointThreshSES value) has
been reached/exceeded for the HDSL2/SHDSL segment endpoint.
hdsl2ShdslPerfCRCanomaliesThresh
hdsl2ShdslEndpointCurr15MinCRCanomalies hdsl2ShdslEndpointThreshCRCanomalies
.1.3.6.1.2.1.10.48.0.5 
This notification indicates that the CRC anomalies threshold
(as per the hdsl2ShdslEndpointThreshCRCanomalies value) has
been reached/exceeded for the HDSL2/SHDSL segment endpoint.
hdsl2ShdslPerfLOSWSThresh
hdsl2ShdslEndpointCurr15MinLOSWS hdsl2ShdslEndpointThreshLOSWS
.1.3.6.1.2.1.10.48.0.6 
This notification indicates that the LOSW Seconds threshold
(as per the hdsl2ShdslEndpointThreshLOSWS value) has been
reached/exceeded for the HDSL2/SHDSL segment endpoint.
hdsl2ShdslPerfUASThresh
hdsl2ShdslEndpointCurr15MinUAS hdsl2ShdslEndpointThreshUAS
.1.3.6.1.2.1.10.48.0.7 
This notification indicates that the unavailable seconds
threshold (as per the hdsl2ShdslEndpointThreshUAS value) has
been reached/exceeded for the HDSL2/SHDSL segment endpoint.
hdsl2ShdslSpanInvalidNumRepeaters
hdsl2ShdslSpanConfNumRepeaters
.1.3.6.1.2.1.10.48.0.8 
This notification indicates that a mismatch has been detected
between the number of repeater/regenerator units configured
for an HDSL2/SHDSL line via the hdsl2ShdslSpanConfNumRepeaters
object and the actual number of repeater/regenerator units
discovered via the EOC.
hdsl2ShdslLoopbackFailure
hdsl2ShdslMaintLoopbackConfig
.1.3.6.1.2.1.10.48.0.9 
This notification indicates that an endpoint maintenance
loopback command failed for an HDSL2/SHDSL segment.