QTECH-PIM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
9
Rows
9
Columns
79

qtechPimInterfaceTable

table
.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2 · 1 row entry · 28 columns
Open in standard view 
The (conceptual) table listing the router's PIM interfaces.
IGMP and PIM are enabled on all interfaces listed in this
table.
qtechPimInterfaceEntry entry .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1
An entry (conceptual row) in the qtechPimInterfaceTable.
Indexes
qtechPimInterfaceIfIndex
Column Syntax OID
qtechPimInterfaceIfIndex
The ifIndex value of this PIM interface.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.1
qtechPimInterfaceAddress
The IP address of the PIM interface.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.2
qtechPimInterfaceNetMask
The network mask for the IP address of the PIM interface.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.3
qtechPimInterfaceMode
The configured mode of this PIM interface. A value of
sparseDense is only valid for PIMv1.
Enumerationr/w
Enumerated Values:
1dense
2sparse
3sparseDense
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.4
qtechPimInterfaceDR
The Designated Router on this PIM interface.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.5
qtechPimInterfaceHelloInterval
The frequency at which PIM Hello messages are transmitted
on this interface.
secondsInteger32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.6
qtechPimInterfaceJoinPruneInterval
The frequency at which PIM Join/Prune messages are
transmitted on this PIM interface. The default value of
this object is the pimJoinPruneInterval.
secondsSNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.7
qtechPimInterfaceCBSRPreference
The preference value for the local interface as a candidate
bootstrap router. The value of -1 is used to indicate that
the local interface is not a candidate BSR interface.
Integer32r/w
Constraints:
range: -1-255
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.8
qtechPimInterfaceTrigHelloInterval
The maximum time before a triggered PIM Hello message
is transmitted on this interface.
secondsSNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.9
qtechPimInterfaceHelloHoldtime
The value set in the Holdtime field of Hello messages
transmitted on this interface. This should be 3.5
times the value of pimInterfaceHelloInterval.
secondsInteger32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.10
qtechPimInterfaceLanPruneDelay
Turns the LAN Prune Delay Option off and on on this
interface.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.11
qtechPimInterfacePropagationDelay
The value inserted into the LAN Prune Delay field of a
LAN Prune Delay option on this interface.
millisecondsInteger32r/w
Constraints:
range: 0-32767
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.12
qtechPimInterfaceOverrideInterval
The value inserted into the Override Interval field of
a LAN Prune Delay option on this interface.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.13
qtechPimInterfaceGenerationID
Turns the Generation ID Option off and on on this
interface.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.14
qtechPimInterfaceJoinPruneHoldtime
The value inserted into the Holdtime field of a Join/
Prune message sent on this interface. The value should
be 3.5 times pimInterfaceJoinPruneInterval.
secondsInteger32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.15
qtechPimInterfaceGraftRetryInterval
The interval a PIM router waits for a Graft Ack before
resending a Graft on this interface.
secondsSNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.16
qtechPimInterfaceMaxGraftRetries
The maximum number of times this router will resend a
Graft on this interface.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.17
qtechPimInterfaceSRTTLThreshold
The Time To Live in a PIM-DM Refresh message at
which it is not forwarded on this interface.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.18
qtechPimInterfaceLanDelayEnabled
Evaluates to TRUE if all routers on this interface are
using the LAN Prune Delay Option.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.19
qtechPimInterfaceSRCapable
Evaluates to TRUE if all routers on this interface are
using the State Refresh Capable Option.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.20
qtechPimInterfaceDRPriority
The Designater Router Priority inserted into the DR
priority option on this interface.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.21
qtechPimInterfaceNbrCounter
The number of interface's neighbour.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.22
qtechPimInterfaceBsrBorderEnabled
Enabled means Define a PIM bootstrap message boundary
for the PIM domain,use disabled to remove the PIM border.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.23
qtechPimInterfaceCountIn
Number of packets into the interface since the
router has been up.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.24
qtechPimInterfaceCountOut
Number of packets out of the interface
since the router has been up.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.25
qtechPimInterfaceEnabled
use the ip pim command in interface configuration mode.
To disable PIM on the interface, use the no form of this
command.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.26
qtechPimNeighborFilterAcl
The name of the neighbor filter address list,which limits
the scope of the neighbor,The default value means all
neighbors will be allowed.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.27
qtechPimDrSupportAddressBound
The name of the DR support address list,which limits the scope of
the souce address ,this will be only used when the interface is DR,
The default value means all souce address will be allowed.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.28

qtechPimNeighborTable

table
.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3 · 1 row entry · 10 columns
Open in standard view 
The (conceptual) table listing the router's PIM neighbors.
qtechPimNeighborEntry entry .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3.1
An entry (conceptual row) in the qtechPimNeighborTable.
Indexes
qtechPimNeighborAddress
Column Syntax OID
qtechPimNeighborAddress
The IP address of the PIM neighbor for which this entry
contains information.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3.1.1
qtechPimNeighborIfIndex
The value of ifIndex for the interface used to reach this
PIM neighbor.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3.1.2
qtechPimNeighborUpTime
The time since this PIM neighbor (last) became a neighbor
of the local router.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3.1.3
qtechPimNeighborExpiryTime
The minimum time remaining before this PIM neighbor will be
aged out.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3.1.4
qtechPimNeighborMode deprecated
The active PIM mode of this neighbor. This object is
deprecated for PIMv2 routers since all neighbors on the
interface must be either dense or sparse as determined by
the protocol running on the interface.
Enumeration
Enumerated Values:
1dense
2sparse
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3.1.5
qtechPimNeighborLanPruneDelay
The value of LAN Prune Delay field of the LAN Prune
Delay Option received from this neighbor. A value of
0 indicates that no LAN Prune Delay Option was
received from this neigbor.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3.1.6
qtechPimNeighborOverrideInterval
The value of Override Interval field of the LAN Prune
Delay Option received from this neighbor. A value of
0 indicates that no LAN Prune Delay Option was
received from this neigbor.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3.1.7
qtechPimNeighborTBit
The value of the T bit field of the LAN Prune
Delay Option received from this neighbor. The T bit
specifies the ability of the neighbor to disable
join suppression.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3.1.8
qtechPimNeighborSRCapable
Evaluates to TRUE if this neighbor is using the State
Refresh Capable Option.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3.1.9
qtechPimNeighborDRPresent
Evaluates to TRUE if this neighbor is using the
Designated Router Option.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3.1.10

qtechPimIpMRouteTable

table
.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.4 · 1 row entry · 8 columns
Open in standard view 
The (conceptual) table listing PIM-specific information on
a subset of the rows of the ipMRouteTable defined in the IP
Multicast MIB.
qtechPimIpMRouteEntry entry .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.4.1
An entry (conceptual row) in the pimIpMRouteTable. There
is one entry per entry in the ipMRouteTable whose incoming
interface is running PIM.
Indexes
IPMROUTE-STD-MIBipMRouteGroup IPMROUTE-STD-MIBipMRouteSource IPMROUTE-STD-MIBipMRouteSourceMask
Column Syntax OID
qtechPimIpMRouteUpstreamAssertTimer
The time remaining before the router changes its upstream
neighbor back to its RPF neighbor. This timer is called the
Assert timer in the PIM Sparse and Dense mode specification.
A value of 0 indicates that no Assert h…
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.4.1.1
qtechPimIpMRouteAssertMetric
The metric advertised by the assert winner on the upstream
interface, or 0 if no such assert is in received.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.4.1.2
qtechPimIpMRouteAssertMetricPref
The preference advertised by the assert winner on the
upstream interface, or 0 if no such assert is in effect.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.4.1.3
qtechPimIpMRouteAssertRPTBit
The value of the RPT-bit advertised by the assert winner on
the upstream interface, or false if no such assert is in
effect.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.4.1.4
qtechPimIpMRouteFlags
This object describes PIM-specific flags related to a
multicast state entry. See the PIM Sparse Mode
specification for the meaning of the RPT and SPT bits.
Enumeration
Enumerated Values:
0rpt
1spt
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.4.1.5
qtechPimIpMRouteRPFNeighbor
The IP Address of the current RPF neighbor. If there
is an upstream Assert Winner, it will be the RPF
neighbor. Otherwise, the RPF neighbor will be
the next hop indicated by unicast routing.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.4.1.6
qtechPimIpMRouteSourceTimer
The time before this router ceases originating State
Refresh messages for this route.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.4.1.7
qtechPimIpMRouteOriginatorSRTTL
The TTL used in State Refresh messages originated by
this router for this route.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.4.1.8

qtechPimIpMRouteNextHopTable

table
.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.5 · 1 row entry · 6 columns
Open in standard view 
The (conceptual) table listing PIM-specific information on
a subset of the rows of the ipMRouteNextHopTable defined in
the IP Multicast MIB.
qtechPimIpMRouteNextHopEntry entry .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.5.1
An entry (conceptual row) in the pimIpMRouteNextHopTable.
There is one entry per entry in the ipMRouteNextHopTable
whose interface is running PIM and whose
ipMRouteNextHopState is pruned(1).
Indexes
IPMROUTE-STD-MIBipMRouteNextHopGroup IPMROUTE-STD-MIBipMRouteNextHopSource IPMROUTE-STD-MIBipMRouteNextHopSourceMask IPMROUTE-STD-MIBipMRouteNextHopIfIndex IPMROUTE-STD-MIBipMRouteNextHopAddress
Column Syntax OID
qtechPimIpMRouteNextHopPruneReason
This object indicates why the downstream interface was
pruned, whether in response to a PIM prune message or due to
PIM Assert processing.
Enumeration
Enumerated Values:
1other
2prune
3assert
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.5.1.1
qtechPimIpMRouteNextHopAssertWinner
The IP Address of the Assert Winner.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.5.1.2
qtechPimIpMRouteNextHopAssertTimer
The time remaining before the PIM router leaves the
current Assert state. A value of 0 indicates that the
router is in the No Info state.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.5.1.3
qtechPimIpMRouteNextHopAssertMetric
The metric advertised by the Assert Winner.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.5.1.4
qtechPimIpMRouteNextHopAssertMetricPref
The metric preference advertised by the Assert Winner.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.5.1.5
qtechPimIpMRouteNextHopJoinPruneTimer
The time remaining before the PIM router reverts to
default operation on this interface. PIM-SM will
cease forwarding, PIM-DM will resume forwarding.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.5.1.6

qtechPimRPSetTable

table
.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.6 · 1 row entry · 7 columns
Open in standard view 
The (conceptual) table listing PIM information for
candidate Rendezvous Points (RPs) for IP multicast groups.
When the local router is the BSR, this information is
obtained from received Candidate-RP-Advertisements.  When
the local router is not the BSR, this information is
obtained from received RP-Set messages.
qtechPimRPSetEntry entry .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.6.1
An entry (conceptual row) in the pimRPSetTable.
Indexes
qtechPimRPSetComponent qtechPimRPSetGroupAddress qtechPimRPSetGroupMask qtechPimRPSetAddress
Column Syntax OID
qtechPimRPSetGroupAddress
The IP multicast group address which, when combined with
pimRPSetGroupMask, gives the group prefix for which this
entry contains information about the Candidate-RP.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.6.1.1
qtechPimRPSetGroupMask
The multicast group address mask which, when combined with
pimRPSetGroupAddress, gives the group prefix for which this
entry contains information about the Candidate-RP.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.6.1.2
qtechPimRPSetAddress
The IP address of the Candidate-RP.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.6.1.3
qtechPimRPSetHoldTime
The holdtime of a Candidate-RP.
secondsInteger32
Constraints:
range: 0-255
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.6.1.4
qtechPimRPSetExpiryTime
The minimum time remaining before the Candidate-RP will be
declared down.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.6.1.5
qtechPimRPSetComponent
A number uniquely identifying the component. Each
protocol instance connected to a separate domain should have
a different index value.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.6.1.6
qtechPimRPSetUpTime
Length of time that this rp has been up.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.6.1.7

qtechPimComponentTable

table
.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.7 · 1 row entry · 9 columns
Open in standard view 
The (conceptual) table containing objects specific to a PIM
domain.  One row exists for each domain to which the router
is connected.  A PIM-SM domain is defined as an area of the
network over which Bootstrap messages are forwarded.
Typically, a PIM-SM router will be a member of exactly one
domain.  This table also supports, however, routers which
may form a border between two PIM-SM domains and do not
forward Bootstrap messages between them.
qtechPimComponentEntry entry .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.7.1
An entry (conceptual row) in the starPimComponentTable.
Indexes
qtechPimComponentIndex
Column Syntax OID
qtechPimComponentIndex
A number uniquely identifying the component. Each protocol
instance connected to a separate domain should have a
different index value. Routers that only support membership
in a single PIM-SM domain should use a pimCo…
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.7.1.1
qtechPimComponentBSRAddress
The IP address of the bootstrap router (BSR) for the local
PIM region.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.7.1.2
qtechPimComponentBSRExpiryTime
The minimum time remaining before the bootstrap router in
the local domain will be declared down. For candidate BSRs,
this is the time until the component sends an RP-Set
message. For other routers, this is the time u…
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.7.1.3
qtechPimComponentCRPHoldTime
The holdtime of the component when it is a candidate RP in
the local domain.
secondsInteger32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.7.1.4
qtechPimComponentBSRUptime
Length of time that this router has been up.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.7.1.5
qtechPimComponentBSRPriority
The Priority of Bsr.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.7.1.6
qtechPimComponentBSRHashMaskLength
Length of a mask (32 bits maximum) that is to be ANDed with
the group address before the hash function is called.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.7.1.7
qtechPimComponentBSRNextBsrMessage
Time (in hours, minutes, and seconds) in which the next
bootstrap message is due from this BSR.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.7.1.8
qtechPimComponentNextCandRPAdv
Time (in hours, minutes, and seconds) in which the next
candidate RP advertisement will be sent.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.7.1.9

qtechPimRPTable

table
.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.13 · 1 row entry · 4 columns
Open in standard view 
The (conceptual) table listing PIM version 2 information
for the Rendezvous Points (RPs) for IP multicast groups.
qtechPimRPEntry entry .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.13.1
An entry (conceptual row) in the pimRPTable.
Indexes
qtechPimRPGroupAddress
Column Syntax OID
qtechPimRPGroupAddress
The IP multicast group address which, when combined with
pimRPSetGroupMask, gives the group prefix for which this
entry contains information about the Candidate-RP.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.13.1.1
qtechPimRPAddress
The IP address of the RP.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.13.1.2
qtechPimRPExpiryTime
The minimum time remaining before the RP will be
declared down. If the local router is not the BSR, this
value is 0.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.13.1.3
qtechPimRPNextRPReachableIn
Indicates the time the next RP-reachable message will be sent.
Time is expressed in hours:minutes:seconds.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.13.1.4

qtechPimStaticRPTable

table
.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.14 · 1 row entry · 4 columns
Open in standard view 
The (conceptual) table listing PIM version 2 information
for the Rendezvous Points (RPs) for IP multicast groups.
qtechPimStaticRPEntry entry .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.14.1
An entry (conceptual row) in the pimStaticRPTable.
Indexes
qtechPimStaticRPAddress
Column Syntax OID
qtechPimStaticRPAddress
The IP address of the RP.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.14.1.1
qtechPimStaticRPAddressIsOverride
Indicates that if there is a conflict, the RP configured with
this command prevails over the RP learned by Bsr-RP.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.14.1.2
qtechPimStaticRPAclName
Name of an access list that defines for which
multicast groups the RP should be used,the
default value means all groups should be
used.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.14.1.3
qtechPimStaticRPStatus
The status of this entry. Creating the entry enables PIM
on the interface; destroying the entry disables PIM on the
interface.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.14.1.4

qtechPimRpCandidateTable

table
.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.15 · 1 row entry · 3 columns
Open in standard view 
The (conceptual) table listing the IP multicast groups for
which the local router is to advertise itself as a
Candidate-RP when the value of pimComponentCRPHoldTime is
non-zero.  If this table is empty, then the local router
will advertise itself as a Candidate-RP for all groups
(providing the value of pimComponentCRPHoldTime is non-
zero).
qtechPimRpCandidateEntry entry .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.15.1
An entry (conceptual row) in the pimRpCandidateTable.
Indexes
qtechPimRpCandidateIfindex
Column Syntax OID
qtechPimRpCandidateIfindex
IP address associated with this interface type and number
is advertised as a candidate RP address.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.15.1.1
qtechPimRpCandidateAclName
The name of Acl list,that defines the group
prefixes that are advertised in association
with the RP address,the default value means
all groups will be advertised in association
with the RP address.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.15.1.2
qtechPimRpCandidateStatus
The status of this entry. Creating the entry enables PIM
on the interface; destroying the entry disables PIM on the
interface.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.15.1.3