qtechPimInterfaceOverrideInterval

QTECH-PIM-MIB · .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.13
MIB view Table view

Object

column r/w Integer32 
The value inserted into the Override Interval field of 
a LAN Prune Delay option on this interface.

Context

MIB
QTECH-PIM-MIB
OID
.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.13
Type
column
Access
readwrite
Status
current
Parent
qtechPimInterfaceEntry
Table
qtechPimInterfaceTable
Siblings
27

Syntax

Integer32

Values & Constraints

Object Constraints
range: 0-65535

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
qtechPimInterfaceIfIndex
The ifIndex value of this PIM interface.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.1
qtechPimInterfaceHelloHoldtime
The value set in the Holdtime field of Hello messages transmitted on this interface. This should be 3.5 times the value of pimInterfaceHelloInterval.
columnseconds Integer32.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.10
qtechPimInterfaceLanPruneDelay
Turns the LAN Prune Delay Option off and on on this interface.
columnEnumeration.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.11
qtechPimInterfacePropagationDelay
The value inserted into the LAN Prune Delay field of a LAN Prune Delay option on this interface.
columnmilliseconds Integer32.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.12
qtechPimInterfaceGenerationID
Turns the Generation ID Option off and on on this interface.
columnEnumeration.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.14
qtechPimInterfaceJoinPruneHoldtime
The value inserted into the Holdtime field of a Join/ Prune message sent on this interface. The value should be 3.5 times pimInterfaceJoinPruneInterval.
columnseconds Integer32.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.15
qtechPimInterfaceGraftRetryInterval
The interval a PIM router waits for a Graft Ack before resending a Graft on this interface.
columnseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.16
qtechPimInterfaceMaxGraftRetries
The maximum number of times this router will resend a Graft on this interface.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.17
qtechPimInterfaceSRTTLThreshold
The Time To Live in a PIM-DM Refresh message at which it is not forwarded on this interface.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.18
qtechPimInterfaceLanDelayEnabled
Evaluates to TRUE if all routers on this interface are using the LAN Prune Delay Option.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.19
qtechPimInterfaceAddress
The IP address of the PIM interface.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.2
qtechPimInterfaceSRCapable
Evaluates to TRUE if all routers on this interface are using the State Refresh Capable Option.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.20
qtechPimInterfaceDRPriority
The Designater Router Priority inserted into the DR priority option on this interface.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.21
qtechPimInterfaceNbrCounter
The number of interface's neighbour.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.22
qtechPimInterfaceBsrBorderEnabled
Enabled means Define a PIM bootstrap message boundary for the PIM domain,use disabled to remove the PIM border.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.23
qtechPimInterfaceCountIn
Number of packets into the interface since the router has been up.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.24
qtechPimInterfaceCountOut
Number of packets out of the interface since the router has been up.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.25
qtechPimInterfaceEnabled
use the ip pim command in interface configuration mode. To disable PIM on the interface, use the no form of this command.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.26
qtechPimNeighborFilterAcl
The name of the neighbor filter address list,which limits the scope of the neighbor,The default value means all neighbors will be allowed.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.27
qtechPimDrSupportAddressBound
The name of the DR support address list,which limits the scope of the souce address ,this will be only used when the interface is DR, The default value means all souce address w…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.28
qtechPimInterfaceNetMask
The network mask for the IP address of the PIM interface.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.3
qtechPimInterfaceMode
The configured mode of this PIM interface. A value of sparseDense is only valid for PIMv1.
columnEnumeration.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.4
qtechPimInterfaceDR
The Designated Router on this PIM interface.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.5
qtechPimInterfaceHelloInterval
The frequency at which PIM Hello messages are transmitted on this interface.
columnseconds Integer32.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.6
qtechPimInterfaceJoinPruneInterval
The frequency at which PIM Join/Prune messages are transmitted on this PIM interface. The default value of this object is the pimJoinPruneInterval.
columnseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.7
qtechPimInterfaceCBSRPreference
The preference value for the local interface as a candidate bootstrap router. The value of -1 is used to indicate that the local interface is not a candidate BSR interface.
columnInteger32.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.8
qtechPimInterfaceTrigHelloInterval
The maximum time before a triggered PIM Hello message is transmitted on this interface.
columnseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.9