qtechPimNeighborAddress
QTECH-PIM-MIB ·
.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3.1.1
Object
column
SNMPv2-SMIIpAddress
The IP address of the PIM neighbor for which this entry contains information.
Context
- MIB
- QTECH-PIM-MIB
- OID
.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- qtechPimNeighborEntry
- Table
- qtechPimNeighborTable
- Siblings
- 9
Syntax
SNMPv2-SMIIpAddress
- Source
- SNMPv2-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| qtechPimNeighborDRPresent Evaluates to TRUE if this neighbor is using the
Designated Router Option. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3.1.10 |
| qtechPimNeighborIfIndex The value of ifIndex for the interface used to reach this
PIM neighbor. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3.1.2 |
| qtechPimNeighborUpTime The time since this PIM neighbor (last) became a neighbor
of the local router. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3.1.3 |
| qtechPimNeighborExpiryTime The minimum time remaining before this PIM neighbor will be
aged out. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3.1.4 |
| qtechPimNeighborMode deprecated The active PIM mode of this neighbor. This object is
deprecated for PIMv2 routers since all neighbors on the
interface must be either dense or sparse as determined by
the protoco… | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3.1.5 |
| qtechPimNeighborLanPruneDelay The value of LAN Prune Delay field of the LAN Prune
Delay Option received from this neighbor. A value of
0 indicates that no LAN Prune Delay Option was
received from this neig… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3.1.6 |
| qtechPimNeighborOverrideInterval The value of Override Interval field of the LAN Prune
Delay Option received from this neighbor. A value of
0 indicates that no LAN Prune Delay Option was
received from this neig… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3.1.7 |
| qtechPimNeighborTBit The value of the T bit field of the LAN Prune
Delay Option received from this neighbor. The T bit
specifies the ability of the neighbor to disable
join suppression. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3.1.8 |
| qtechPimNeighborSRCapable Evaluates to TRUE if this neighbor is using the State
Refresh Capable Option. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3.1.9 |