qtechPimInterfaceNbrCounter
QTECH-PIM-MIB ·
.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.22
Object
column
SNMPv2-SMIInteger32
The number of interface's neighbour.
Context
- MIB
- QTECH-PIM-MIB
- OID
.1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.22- Type
- column
- Access
- readonly
- Status
- current
- Parent
- qtechPimInterfaceEntry
- Table
- qtechPimInterfaceTable
- Siblings
- 27
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| qtechPimInterfaceIfIndex The ifIndex value of this PIM interface. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.1 |
| qtechPimInterfaceHelloHoldtime The value set in the Holdtime field of Hello messages
transmitted on this interface. This should be 3.5
times the value of pimInterfaceHelloInterval. | column | seconds Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.10 |
| qtechPimInterfaceLanPruneDelay Turns the LAN Prune Delay Option off and on on this
interface. | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.11 |
| qtechPimInterfacePropagationDelay The value inserted into the LAN Prune Delay field of a
LAN Prune Delay option on this interface. | column | milliseconds Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.12 |
| qtechPimInterfaceOverrideInterval The value inserted into the Override Interval field of
a LAN Prune Delay option on this interface. | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.13 |
| qtechPimInterfaceGenerationID Turns the Generation ID Option off and on on this
interface. | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.14 |
| qtechPimInterfaceJoinPruneHoldtime The value inserted into the Holdtime field of a Join/
Prune message sent on this interface. The value should
be 3.5 times pimInterfaceJoinPruneInterval. | column | seconds Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.15 |
| qtechPimInterfaceGraftRetryInterval The interval a PIM router waits for a Graft Ack before
resending a Graft on this interface. | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.16 |
| qtechPimInterfaceMaxGraftRetries The maximum number of times this router will resend a
Graft on this interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.17 |
| qtechPimInterfaceSRTTLThreshold The Time To Live in a PIM-DM Refresh message at
which it is not forwarded on this interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.18 |
| qtechPimInterfaceLanDelayEnabled Evaluates to TRUE if all routers on this interface are
using the LAN Prune Delay Option. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.19 |
| qtechPimInterfaceAddress The IP address of the PIM interface. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.2 |
| qtechPimInterfaceSRCapable Evaluates to TRUE if all routers on this interface are
using the State Refresh Capable Option. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.20 |
| qtechPimInterfaceDRPriority The Designater Router Priority inserted into the DR
priority option on this interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.21 |
| qtechPimInterfaceBsrBorderEnabled Enabled means Define a PIM bootstrap message boundary
for the PIM domain,use disabled to remove the PIM border. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.23 |
| qtechPimInterfaceCountIn Number of packets into the interface since the
router has been up. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.24 |
| qtechPimInterfaceCountOut Number of packets out of the interface
since the router has been up. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.25 |
| qtechPimInterfaceEnabled use the ip pim command in interface configuration mode.
To disable PIM on the interface, use the no form of this
command. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.26 |
| qtechPimNeighborFilterAcl The name of the neighbor filter address list,which limits
the scope of the neighbor,The default value means all
neighbors will be allowed. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.27 |
| qtechPimDrSupportAddressBound The name of the DR support address list,which limits the scope of
the souce address ,this will be only used when the interface is DR,
The default value means all souce address w… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.28 |
| qtechPimInterfaceNetMask The network mask for the IP address of the PIM interface. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.3 |
| qtechPimInterfaceMode The configured mode of this PIM interface. A value of
sparseDense is only valid for PIMv1. | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.4 |
| qtechPimInterfaceDR The Designated Router on this PIM interface. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.5 |
| qtechPimInterfaceHelloInterval The frequency at which PIM Hello messages are transmitted
on this interface. | column | seconds Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.6 |
| qtechPimInterfaceJoinPruneInterval The frequency at which PIM Join/Prune messages are
transmitted on this PIM interface. The default value of
this object is the pimJoinPruneInterval. | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.7 |
| qtechPimInterfaceCBSRPreference The preference value for the local interface as a candidate
bootstrap router. The value of -1 is used to indicate that
the local interface is not a candidate BSR interface. | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.8 |
| qtechPimInterfaceTrigHelloInterval The maximum time before a triggered PIM Hello message
is transmitted on this interface. | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.9 |