PROTECTION-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
75

mspTable

table
.1.3.6.1.4.1.1038.130.10.2 · 1 row entry · 19 columns
Open in standard view 
List of multiplex section protection in equipment.
mspEntry entry .1.3.6.1.4.1.1038.130.10.2.1
A particular multiplex section protection of the equipment.
Each entry is created in using the msTTPTable of the Sdh-Ets MIB.
Indexes
mspIndex
Column Syntax OID
mspIndex
A unique value which identify a particular multiplex section protection.
This index is equal to an msTTPIndex(=spiIndex) which gives the interface involved .
The value of index is a constant assigned to an entry at
equ…
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.1038.130.10.2.1.1
mspWorkingPointer
A reference to the object which sends the data flow to this
function on working synchronous port interface side.
In most equipments, this value cannot be changed and points to
the working MST it is hard wired with.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.1038.130.10.2.1.2
mspProtectionPointer
A reference to the object which sends the data flow to this
function on protection synchronous port interface side.
In most equipments, this value cannot be changed and points to
the protection MST it is hard wired with…
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.1038.130.10.2.1.3
mspType
Indication of the protection type.
MspTyper/w
Textual Convention: MspType Enumeration
Type Values:
0unknown
1onePlusOneOptimized
2onePlusOneCompatible
3oneForN
 .1.3.6.1.4.1.1038.130.10.2.1.4
mspDir
Indication of the direction.
MspDirectionr/w
Textual Convention: MspDirection Enumeration
Type Values:
0unknown
1unidirectionnal
2bidirectionnal
 .1.3.6.1.4.1.1038.130.10.2.1.5
mspTraffic
The value of this field indicates the protection switch position.
TrafficStatus
Textual Convention: TrafficStatus Enumeration
Type Values:
0none
1working
2protection
 .1.3.6.1.4.1.1038.130.10.2.1.6
mspRevertive
If the value is true the msp function is allowed to spontaneously
switch back to working chanel when it is available.
If not, the msp can switch back to working chanel only if
protection chanel fails.
EQUIPMENT-MIBSagemBooleanr/w
Textual Convention: EQUIPMENT-MIBSagemBoolean Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1038.130.10.2.1.7
mspWtr
The time (in seconds) the msp function waits before
considering a chanel as good after a fail.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.1038.130.10.2.1.8
mspSfSdPriority
Signal Fail and Signal Degrade can be treated according to two set
of priority. The equipement will send SF and SD events according to
the value of this field.
MspPriorityr/w
Textual Convention: MspPriority Enumeration
Type Values:
0unknown
1highG783
2low
 .1.3.6.1.4.1.1038.130.10.2.1.9
mspSfSdHoldOffTime
The period (in tenth of seconds) during which a
sf or a Signal Degrade is
ignored by the MSP switch.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.1038.130.10.2.1.10
mspCommand
Manual or forced commands can be apply to the protection switch.
The forced and manual switch can be refused or cleared by equipment
if a higher priority APS command is received or if the protection chanel
is down.
When…
MspCommandr/w
Textual Convention: MspCommand Enumeration
Type Values:
0clear
1lw
2lp
3fsW
4fsP
5msW
6msP
7exer
 .1.3.6.1.4.1.1038.130.10.2.1.11
mspInitiator
Indicates the initiator equipment.
MspInitiator
Textual Convention: MspInitiator Enumeration
Type Values:
0unknown
1local
2remote
 .1.3.6.1.4.1.1038.130.10.2.1.12
mspStatus
Indicates the initiator equipment status :
lockoutProtection(15),
forcedSwitch(14),
highSF(13),
lowSF(12),
highSD(11),
lowSD(10),
manualSwitch(8),
waitToRestore(6),
exercise(4),
reverseRequest(2),
doNotRevert(1),
noRequ…
MspStatus
Textual Convention: MspStatus Enumeration
Type Values:
0noRequest
1doNotRevert
2reverseRequest
4exercise
6waitToRestore
8manualSwitch
10lowSD
11highSD
12lowSF
13highSF
14forcedSwitch
15lockoutProtection
 .1.3.6.1.4.1.1038.130.10.2.1.13
mspMonitor
When the value of this field is set to false, the failure detection
is stopped for this multiplex section protection.
EQUIPMENT-MIBSagemBooleanr/w
Textual Convention: EQUIPMENT-MIBSagemBoolean Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1038.130.10.2.1.14
mspFailure
Active failures on multiplex section protection.
MspFailure
Textual Convention: MspFailure Enumeration
Type Values:
0none
1pam
2scm
4otm
6scmOtm
 .1.3.6.1.4.1.1038.130.10.2.1.15
mspSeverity
A reference to failure severity for multiplex section protection.
EQUIPMENT-MIBSeverity
Textual Convention: EQUIPMENT-MIBSeverity Enumeration
Type Values:
1nonAlarmed
2minor
3major
4critical
5warning
6invNonAlarmed
7invMinor
8invMajor
9invCritical
10invWarning
 .1.3.6.1.4.1.1038.130.10.2.1.16
mspPam
Severity associed with Protection Architecture Mismatch failure
for multiplex section protection.
EQUIPMENT-MIBSeverityr/w
Textual Convention: EQUIPMENT-MIBSeverity Enumeration
Type Values:
1nonAlarmed
2minor
3major
4critical
5warning
6invNonAlarmed
7invMinor
8invMajor
9invCritical
10invWarning
 .1.3.6.1.4.1.1038.130.10.2.1.20
mspScm
Severity associed with Selector Control Mismatch failure
for multiplex section protection.
EQUIPMENT-MIBSeverityr/w
Textual Convention: EQUIPMENT-MIBSeverity Enumeration
Type Values:
1nonAlarmed
2minor
3major
4critical
5warning
6invNonAlarmed
7invMinor
8invMajor
9invCritical
10invWarning
 .1.3.6.1.4.1.1038.130.10.2.1.21
mspOtm
Severity associed with Operation Type Mismatch failure
for multiplex section protection.
EQUIPMENT-MIBSeverityr/w
Textual Convention: EQUIPMENT-MIBSeverity Enumeration
Type Values:
1nonAlarmed
2minor
3major
4critical
5warning
6invNonAlarmed
7invMinor
8invMajor
9invCritical
10invWarning
 .1.3.6.1.4.1.1038.130.10.2.1.22

msSPRingTable

table
.1.3.6.1.4.1.1038.130.20.6 · 1 row entry · 26 columns
Open in standard view 
List of multiplex section protection in equipment.
msSPRingEntry entry .1.3.6.1.4.1.1038.130.20.6.1
A particular multiplex section protection of the equipment.
Each entry is created in using the msTTPTable of the Sdh-Ets MIB.
spiIndex gives the interface involved (line east or west)
Indexes
msSPRingIndex
Column Syntax OID
msSPRingIndex
A unique value which identify a particular SPRing = West STM index.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.1038.130.20.6.1.1
msSPRingWestPointer
A reference to the object which sends the data flow to this
function on synchronous port interface side.
In most equipments, this value cannot be changed and points to
the West MST it is hard wired with.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.1038.130.20.6.1.2
msSPRingEastPointer
A reference to the object which sends the data flow to this
function on synchronous port interface side.
In most equipments, this value cannot be changed and points to
the East MST it is hard wired with.
When this vari…
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.1038.130.20.6.1.3
msSPRingWtr
The time (in seconds) the spring function waits before
considering a chanel as good after a fail.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.1038.130.20.6.1.5
msSPRingSfSdHoldOffTime
The period (in tenth of seconds) during which a
sf or a Signal Degrade is ignored by the SPRing switch.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.1038.130.20.6.1.6
msSPRingCommandSide
Side of the command
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.1038.130.20.6.1.7
msSPRingCommand
Manual or forced commands can be apply to the protection switch.
MsSPRingCommandr/w
Textual Convention: MsSPRingCommand Enumeration
Type Values:
3exerR
6msR
13fsR
15lpS
16clear
19off
20on
 .1.3.6.1.4.1.1038.130.20.6.1.8
msSPRingInitiator1
A reference(ID) to the equipment that initiate the SWITCH; this is mainly the Master
when the equipment is in SWITCH state; in some case like bidirectional SF both equipment
of the couple equipment are Master.
In PASS…
MsSPRingID
Textual Convention: MsSPRingID Enumeration
Type Values:
0node0
1node1
2node2
3node3
4node4
5node5
6node6
7node7
8node8
9node9
10node10
11node11
12node12
13node13
14node14
15node15
255nodeUNK
 .1.3.6.1.4.1.1038.130.20.6.1.10
msSPRingInitiator2
A reference(ID) to the equipment that respond to the SWITCH; this is mainly the Slave
when the equipment is in SWITCH state; in some case like bidirectional SF both equipment
of the couple equipment are Master.
In PAS…
MsSPRingID
Textual Convention: MsSPRingID Enumeration
Type Values:
0node0
1node1
2node2
3node3
4node4
5node5
6node6
7node7
8node8
9node9
10node10
11node11
12node12
13node13
14node14
15node15
255nodeUNK
 .1.3.6.1.4.1.1038.130.20.6.1.11
msSPRingMonitor
When the value of this field is set to false, the failure detection
is stopped for this multiplex section protection.
EQUIPMENT-MIBSagemBooleanr/w
Textual Convention: EQUIPMENT-MIBSagemBoolean Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1038.130.20.6.1.12
msSPRingFailure
Active failures on multiplex section protection
MsSPRingFailure
Textual Convention: MsSPRingFailure Enumeration
Type Values:
0none
1ato
2arv
3aun
4ptm
5mms
6exr
 .1.3.6.1.4.1.1038.130.20.6.1.13
msSPRingSeverity
A reference to failure severity for multiplex section protection.
EQUIPMENT-MIBSeverity
Textual Convention: EQUIPMENT-MIBSeverity Enumeration
Type Values:
1nonAlarmed
2minor
3major
4critical
5warning
6invNonAlarmed
7invMinor
8invMajor
9invCritical
10invWarning
 .1.3.6.1.4.1.1038.130.20.6.1.14
msSPRingAto
Severity associed with APS Time Out failure failure
for MS-SPRing.
EQUIPMENT-MIBSeverityr/w
Textual Convention: EQUIPMENT-MIBSeverity Enumeration
Type Values:
1nonAlarmed
2minor
3major
4critical
5warning
6invNonAlarmed
7invMinor
8invMajor
9invCritical
10invWarning
 .1.3.6.1.4.1.1038.130.20.6.1.21
msSPRingArv
Severity associed with APS Rules Violation failure failure
for MS-SPRing.
EQUIPMENT-MIBSeverityr/w
Textual Convention: EQUIPMENT-MIBSeverity Enumeration
Type Values:
1nonAlarmed
2minor
3major
4critical
5warning
6invNonAlarmed
7invMinor
8invMajor
9invCritical
10invWarning
 .1.3.6.1.4.1.1038.130.20.6.1.22
msSPRingAun
Severity associed with APS Unknown Node failure failure
for MS-SPRing.
EQUIPMENT-MIBSeverityr/w
Textual Convention: EQUIPMENT-MIBSeverity Enumeration
Type Values:
1nonAlarmed
2minor
3major
4critical
5warning
6invNonAlarmed
7invMinor
8invMajor
9invCritical
10invWarning
 .1.3.6.1.4.1.1038.130.20.6.1.23
msSPRingPtm
Severity associed with Potential Traffic Misconnection failure
for MS-SPRing.
EQUIPMENT-MIBSeverityr/w
Textual Convention: EQUIPMENT-MIBSeverity Enumeration
Type Values:
1nonAlarmed
2minor
3major
4critical
5warning
6invNonAlarmed
7invMinor
8invMajor
9invCritical
10invWarning
 .1.3.6.1.4.1.1038.130.20.6.1.24
msSPRingMms
Severity associed with Mutiple Multiplex Section Fail failure
for MS-SPRing.
EQUIPMENT-MIBSeverityr/w
Textual Convention: EQUIPMENT-MIBSeverity Enumeration
Type Values:
1nonAlarmed
2minor
3major
4critical
5warning
6invNonAlarmed
7invMinor
8invMajor
9invCritical
10invWarning
 .1.3.6.1.4.1.1038.130.20.6.1.25
msSPRingExr
Severity associed with EXeRcise failure
for MS-SPRing.
EQUIPMENT-MIBSeverityr/w
Textual Convention: EQUIPMENT-MIBSeverity Enumeration
Type Values:
1nonAlarmed
2minor
3major
4critical
5warning
6invNonAlarmed
7invMinor
8invMajor
9invCritical
10invWarning
 .1.3.6.1.4.1.1038.130.20.6.1.26
msSPRingSimpleFailure
Indicate if simple or multi ring failure must be considerated
EQUIPMENT-MIBSagemBooleanr/w
Textual Convention: EQUIPMENT-MIBSagemBoolean Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1038.130.20.6.1.27
msSPRingId
Ring Identifier of the equipement
MsSPRingIDr/w
Textual Convention: MsSPRingID Enumeration
Type Values:
0node0
1node1
2node2
3node3
4node4
5node5
6node6
7node7
8node8
9node9
10node10
11node11
12node12
13node13
14node14
15node15
255nodeUNK
 .1.3.6.1.4.1.1038.130.20.6.1.28
msSPRingNodeState State
Textual Convention: State Enumeration
Type Values:
0off
1idle
2pass
3switch
4unknown
 .1.3.6.1.4.1.1038.130.20.6.1.29
msSPRingSwitchingSide
Switching SideSide
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.1038.130.20.6.1.30
msSPRingWestTraffic
The value of this field indicates the protection switch position.
TrafficStatus
Textual Convention: TrafficStatus Enumeration
Type Values:
0none
1working
2protection
 .1.3.6.1.4.1.1038.130.20.6.1.31
msSPRingEastTraffic
The value of this field indicates the protection switch position.
TrafficStatus
Textual Convention: TrafficStatus Enumeration
Type Values:
0none
1working
2protection
 .1.3.6.1.4.1.1038.130.20.6.1.32
msSPRingWestStatus
Indicates the local status:
OFF (19), lockoutProtection (16), forcedSwitch-R(13),sf-R(11),sd-R(8),
manualSwitch-R(6),
waitToRestore(5),exer-R(3),noRequest(0)
MsSPRingStatus
Textual Convention: MsSPRingStatus Enumeration
Type Values:
0noRequest
1reverseRequestR
3exerR
5waitToRestore
6manualSwitchR
8sdR
11sfR
13forcedSwitchR
15lockoutProtection
19off
 .1.3.6.1.4.1.1038.130.20.6.1.33
msSPRingEastStatus
Indicates the local status:
OFF (19), lockoutProtection (16), forcedSwitch-R(13),sf-R(11),sd-R(8),
manualSwitch-R(6),
waitToRestore(5),exer-R(3),noRequest(0)
MsSPRingStatus
Textual Convention: MsSPRingStatus Enumeration
Type Values:
0noRequest
1reverseRequestR
3exerR
5waitToRestore
6manualSwitchR
8sdR
11sfR
13forcedSwitchR
15lockoutProtection
19off
 .1.3.6.1.4.1.1038.130.20.6.1.34

msSPRingTopoMapTable

table
.1.3.6.1.4.1.1038.130.20.11 · 1 row entry · 2 columns
Open in standard view 
Topology Map of the ring = West STM index + Val (1<=Val<=16).
msSPRingTopoMapEntry entry .1.3.6.1.4.1.1038.130.20.11.1
A particular entry of the ring topology map.
Indexes
msSPRingTopoMapIndex
Column Syntax OID
msSPRingTopoMapIndex
index
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.1038.130.20.11.1.1
msSPRingTopoMapID
identifier of the node
MsSPRingIDr/w
Textual Convention: MsSPRingID Enumeration
Type Values:
0node0
1node1
2node2
3node3
4node4
5node5
6node6
7node7
8node8
9node9
10node10
11node11
12node12
13node13
14node14
15node15
255nodeUNK
 .1.3.6.1.4.1.1038.130.20.11.1.2

msSPRingMisconMapTable

table
.1.3.6.1.4.1.1038.130.20.21 · 1 row entry · 7 columns
Open in standard view 
Connectivity (misconnection) Map of the ring.
msSPRingMisconMapEntry entry .1.3.6.1.4.1.1038.130.20.21.1
A particular entry of the ring connectivity (misconnection) map.
All entries are created after setting the msSPRingWestPointer.
Indexes
msSPRingMisconMapIndex
Column Syntax OID
msSPRingMisconMapIndex
Index = West STM index + Val (1<=Val<=16)
ADR2500c : val = 1 to 8 for West and 9 to 16 for East
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.1038.130.20.21.1.1
msSPRingMisconMapSide
Side (WestPointer/msSPRingEast) of the interface that supports the AU4
MsSPRingSide
Textual Convention: MsSPRingSide Enumeration
Type Values:
0west
1east
2unknown
 .1.3.6.1.4.1.1038.130.20.21.1.2
msSPRingMisconMapIn
Node of the ring where the Au4 traffic enters the ring
MsSPRingIDr/w
Textual Convention: MsSPRingID Enumeration
Type Values:
0node0
1node1
2node2
3node3
4node4
5node5
6node6
7node7
8node8
9node9
10node10
11node11
12node12
13node13
14node14
15node15
255nodeUNK
 .1.3.6.1.4.1.1038.130.20.21.1.3
msSPRingMisconMapOut
Node of the ring where the Au4 traffic exits the ring
MsSPRingIDr/w
Textual Convention: MsSPRingID Enumeration
Type Values:
0node0
1node1
2node2
3node3
4node4
5node5
6node6
7node7
8node8
9node9
10node10
11node11
12node12
13node13
14node14
15node15
255nodeUNK
 .1.3.6.1.4.1.1038.130.20.21.1.4
msSPRingMisconMapTimeSlot
Time Slot assignment for the AU4
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.1038.130.20.21.1.5
msSPRingMisconMapType
If the value is equal to terminated, the traffic in the ring is inserted
or extracted at this node.
If the value is equal to passedThrough the traffic only cross the node
MisconMapTyper/w
Textual Convention: MisconMapType Enumeration
Type Values:
1terminated
2passedThrough
 .1.3.6.1.4.1.1038.130.20.21.1.6
msSPRingMisconMapLOAccess
True if the AU4 is accessed at LO layers somewhere in the ring
EQUIPMENT-MIBSagemBooleanr/w
Textual Convention: EQUIPMENT-MIBSagemBoolean Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1038.130.20.21.1.7

msSPRingNUTTable

table
.1.3.6.1.4.1.1038.130.20.31 · 1 row entry · 2 columns
Open in standard view 
Topology Map of the ring.
msSPRingNUTEntry entry .1.3.6.1.4.1.1038.130.20.31.1
A particular entry of the ring topology map.
Indexes
msSPRingNUTIndex
Column Syntax OID
msSPRingNUTIndex
AU4 index = West STM index + Val (Val = working timeSlot; 1<=Val<=8)
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.1038.130.20.31.1.1
msSPRingNUTisNut
Define if the traffic is used for NUT Traffic
EQUIPMENT-MIBSagemBooleanr/w
Textual Convention: EQUIPMENT-MIBSagemBoolean Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1038.130.20.31.1.2

sncTable

table
.1.3.6.1.4.1.1038.130.30.2 · 1 row entry · 13 columns
Open in standard view 
List of snc protection in equipment.
sncEntry entry .1.3.6.1.4.1.1038.130.30.2.1
A particular SNC protection which is created in using the linkTable of the Xconnection MIB.
Indexes
sncIndex
Column Syntax OID
sncIndex
sncIndex = 1000*sncType + sncTTPSink = linkIndex
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.1038.130.30.2.1.1
sncCTPSink
The value of this field is the index of the Output Connection to which
an snc function is applied.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.1038.130.30.2.1.2
sncLinkType
Trail level of the connection
LinkType
Textual Convention: LinkType Enumeration
Type Values:
0unknown
1au
2au4c
3au16c
10tu3
20tu12
 .1.3.6.1.4.1.1038.130.30.2.1.3
sncCTPSourceW
The value of this field indicates the Working Input Connection Point which
composes the protection link of the Output Connection Point (sncIndex).
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.1038.130.30.2.1.4
sncCTPSourceP
The value of this field indicates the Protected Input Connection Point which
composes the protection link of the Output Connection Point (sncIndex).
When this variable is setting, the protection is created and activat…
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.1038.130.30.2.1.5
sncTrafficStatus
This field indicates the Protection unit switch position.
TrafficStatus
Textual Convention: TrafficStatus Enumeration
Type Values:
0none
1working
2protection
 .1.3.6.1.4.1.1038.130.30.2.1.6
sncWorkingTriggerType
The value of this field is the criterion to trigger a switch for the Working Input
Connection Point.SNC/I uses SF criterion for switching: TU-AIS/TU-LOP for VC12/VC3 ,
AU-AIS/AU-LOP for VC4 and , by extension, ppiLOS…
TriggerCriterionr/w
Textual Convention: TriggerCriterion Enumeration
Type Values:
0none
1sncI
2sncN
3sncIRdi
4sncNRdi
 .1.3.6.1.4.1.1038.130.30.2.1.8
sncProtectionTriggerType
The value of this field is the criterion to trigger a switch for the Protection Input
Connection Point. SNC/I uses SF criterion for switching: TU-AIS/TU-LOP for VC12/VC3 ,
AU-AIS/AU-LOP for VC4 and , by extension, pp…
TriggerCriterionr/w
Textual Convention: TriggerCriterion Enumeration
Type Values:
0none
1sncI
2sncN
3sncIRdi
4sncNRdi
 .1.3.6.1.4.1.1038.130.30.2.1.9
sncRevertive
If the value is true the Protection unit function is allowed
to spontaneously switch back to working chanel when it is available.
If not, the snc can switch back to working chanel only if
protection chanel fails.
EQUIPMENT-MIBSagemBooleanr/w
Textual Convention: EQUIPMENT-MIBSagemBoolean Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1038.130.30.2.1.20
sncWtr
The time (in seconds) the Protection unit function waits before
considering a chanel as good after a fail.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.1038.130.30.2.1.21
sncStateProcess
The value of this field indicates the state of the snc protection process.
SNCStateProcess
Textual Convention: SNCStateProcess Enumeration
Type Values:
0nrnormal
1nrsecours
2wtr
3dontRev
4mssecours
5msnormal
6sdnormal
7sdsecours
8sfnormal
9fssecours
10sfsecours
11fsnormal
12lockout
 .1.3.6.1.4.1.1038.130.30.2.1.22
sncHoldOffTime
The time in tenth of seconds during which a protection trigger criterion is
ignored.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.1038.130.30.2.1.23
sncCommand
Manual or forced commands can be apply to the protection unit.
The forced and manual switch can be refused or cleared by equipment
if a higher priority evenement is received or if the protection chanel
is down.
SNCCommandr/w
Textual Convention: SNCCommand Enumeration
Type Values:
0clear
1manualWorking
2manualProtection
3forcedWorking
4forcedProtection
5lockout
19off
20on
 .1.3.6.1.4.1.1038.130.30.2.1.24

cardpTable

table
.1.3.6.1.4.1.1038.130.40.2 · 1 row entry · 6 columns
Open in standard view 
List of card protections in equipment.
cardpEntry entry .1.3.6.1.4.1.1038.130.40.2.1
A particular card protection which is created in using the boardTable of the Shelf MIB.
Indexes
cardpIndex
Column Syntax OID
cardpIndex
cardpIndex = boardIndex in the Shelf Mib.
This index points to the working board.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.1038.130.40.2.1.1
cardpBoardFamily
This field indicates the family of board concerned by the protection.
CardpFamily
Textual Convention: CardpFamily Enumeration
Type Values:
0none
1switch
 .1.3.6.1.4.1.1038.130.40.2.1.2
cardpReliefIndex
A reference to the relief card. It must be an existing index in the boardTable of Shelf Mib.
The relief card and the protected Card must below to the same familly.
When this variable is setting, the protection is creat…
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.1038.130.40.2.1.3
cardpTrafficStatus
Indication of the protection switch position.
TrafficStatus
Textual Convention: TrafficStatus Enumeration
Type Values:
0none
1working
2protection
 .1.3.6.1.4.1.1038.130.40.2.1.4
cardpCommand
Manual commands can be apply to the protection unit.
The manual switch can be refused or cleared by equipment
if a higher priority evenement is received or if the protection chanel
is down.
CardpCommandr/w
Textual Convention: CardpCommand Enumeration
Type Values:
0clear
1manualSwitch
 .1.3.6.1.4.1.1038.130.40.2.1.5
cardpStatus
Indication of the current protection status
CardpStatus
Textual Convention: CardpStatus Enumeration
Type Values:
0notSwitched
1manualSwitch
2automaticSwitch
 .1.3.6.1.4.1.1038.130.40.2.1.6