mspIndex
PROTECTION-MIB ·
.1.3.6.1.4.1.1038.130.10.2.1.1
Object
column
Integer32
A unique value which identify a particular multiplex section protection. This index is equal to an msTTPIndex(=spiIndex) which gives the interface involved . The value of index is a constant assigned to an entry at equipment design time. It is usualy related to harware.
Context
- MIB
- PROTECTION-MIB
- OID
.1.3.6.1.4.1.1038.130.10.2.1.1- Type
- column
- Access
- readonly
- Status
- current
- Parent
- mspEntry
- Table
- mspTable
- Siblings
- 18
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mspSfSdHoldOffTime The period (in tenth of seconds) during which a
sf or a Signal Degrade is
ignored by the MSP switch. | column | Integer32 | .1.3.6.1.4.1.1038.130.10.2.1.10 |
| mspCommand Manual or forced commands can be apply to the protection switch.
The forced and manual switch can be refused or cleared by equipment
if a higher priority APS command is received o… | column | MspCommand | .1.3.6.1.4.1.1038.130.10.2.1.11 |
| mspInitiator Indicates the initiator equipment. | column | MspInitiator | .1.3.6.1.4.1.1038.130.10.2.1.12 |
| mspStatus Indicates the initiator equipment status :
lockoutProtection(15),
forcedSwitch(14),
highSF(13),
lowSF(12),
highSD(11),
lowSD(10),
manualSwitch(8),
waitToRestore(6),
exercise(4),
r… | column | MspStatus | .1.3.6.1.4.1.1038.130.10.2.1.13 |
| mspMonitor When the value of this field is set to false, the failure detection
is stopped for this multiplex section protection. | column | EQUIPMENT-MIBSagemBoolean | .1.3.6.1.4.1.1038.130.10.2.1.14 |
| mspFailure Active failures on multiplex section protection. | column | MspFailure | .1.3.6.1.4.1.1038.130.10.2.1.15 |
| mspSeverity A reference to failure severity for multiplex section protection. | column | EQUIPMENT-MIBSeverity | .1.3.6.1.4.1.1038.130.10.2.1.16 |
| mspWorkingPointer A reference to the object which sends the data flow to this
function on working synchronous port interface side.
In most equipments, this value cannot be changed and points to
the… | column | Integer32 | .1.3.6.1.4.1.1038.130.10.2.1.2 |
| mspPam Severity associed with Protection Architecture Mismatch failure
for multiplex section protection. | column | EQUIPMENT-MIBSeverity | .1.3.6.1.4.1.1038.130.10.2.1.20 |
| mspScm Severity associed with Selector Control Mismatch failure
for multiplex section protection. | column | EQUIPMENT-MIBSeverity | .1.3.6.1.4.1.1038.130.10.2.1.21 |
| mspOtm Severity associed with Operation Type Mismatch failure
for multiplex section protection. | column | EQUIPMENT-MIBSeverity | .1.3.6.1.4.1.1038.130.10.2.1.22 |
| mspProtectionPointer A reference to the object which sends the data flow to this
function on protection synchronous port interface side.
In most equipments, this value cannot be changed and points to
… | column | Integer32 | .1.3.6.1.4.1.1038.130.10.2.1.3 |
| mspType Indication of the protection type. | column | MspType | .1.3.6.1.4.1.1038.130.10.2.1.4 |
| mspDir Indication of the direction. | column | MspDirection | .1.3.6.1.4.1.1038.130.10.2.1.5 |
| mspTraffic The value of this field indicates the protection switch position. | column | TrafficStatus | .1.3.6.1.4.1.1038.130.10.2.1.6 |
| mspRevertive If the value is true the msp function is allowed to spontaneously
switch back to working chanel when it is available.
If not, the msp can switch back to working chanel only if
pro… | column | EQUIPMENT-MIBSagemBoolean | .1.3.6.1.4.1.1038.130.10.2.1.7 |
| mspWtr The time (in seconds) the msp function waits before
considering a chanel as good after a fail. | column | Integer32 | .1.3.6.1.4.1.1038.130.10.2.1.8 |
| mspSfSdPriority Signal Fail and Signal Degrade can be treated according to two set
of priority. The equipement will send SF and SD events according to
the value of this field. | column | MspPriority | .1.3.6.1.4.1.1038.130.10.2.1.9 |