NTNTECH-CHASSIS-CONFIGURATION-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
33

mumCfgTable

table
.1.3.6.1.4.1.8059.1.1.1.1.1.1.2 · 1 row entry · 8 columns
Open in standard view 
A list of MUM200-2/2000-2 module or Mini/Micro DSLAM entries.
mumCfgEntry entry .1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1
An entry containing management information applicable to a MUM200-2/MUM2000-2
module or Mini/Micro DSLAM.
Indexes
mumCfgIndex
Column Syntax OID
mumCfgIndex
Translates to the physical slot number that a MUM200-2/2000-2 module
exists within a chassis. The Mini/Micro DSLAMs' physical location is
set to 1 by default. See below,

chassis type physical loc…
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.1
mumCfgIpAddress
IP Address assigned to a MUM200-2/2000-2 module or Mini/Micro DSLAM.
This parameter is initially set to a default value, i.e 192.168.254.252
for a MUM200-2/2000-2 module located in slot 13 of an IPD12000, slot 5
of an I…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.2
mumCfgSubnetMask
The Subnet Mask assigned to a MUM200-2/2000-2 module or Mini/Micro DSLAM.
This parameter is assiged by the user, the default value is 255.255.255.0.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.3
mumCfgDefaultGateway
The Default Gateway assigned to a MUM200-2/2000-2 module or Mini/Micro DSLAM.
This value is assiged by the user, the default value is 0.0.0.0.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.4
mumCfgInbandMgmt
Inband management feature, when enabled [ON(1)], allows access to the
DSLAM via the network against an assigned IP address, subnet mask,
and default gateway.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.5
mumCfgInbandMGMTVlanID
The IP DSLAM supports 802.1Q Virtual LANs (VLANs). This parameter
configuration applies to the inband management traffic only.

It does not apply to out of band traffic received from the MGMT port.
…
Integer32r/w
Constraints:
range: 0-4085
 .1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.6
mumCfgInterConnection
IPD12000 or IPD4000 DSLAM interconnect configuration provides the system
manager the ability to daisy-chain one IP DSLAM to another so that a single
router may be used for all DSLAMs in the chain.
Enumerationr/w
Enumerated Values:
1neither
2uplink1
3uplink2
4uplink3
5uplink4
6mgmt
 .1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.7
mumCfgCommitChange
Set to enabled(1) in order to commit the latest changes to the IP address, subnetmask,
default gateway chassis parameters. This is only applicable to the SNE2040G-P and the
SNE2040G-S.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.8

uimCfgEthTable

table
.1.3.6.1.4.1.8059.1.1.1.1.1.1.3.1 · 1 row entry · 4 columns
Open in standard view 
A list of ethernet Uplink Interface Module (UIM) entries.
uimCfgEthEntry entry .1.3.6.1.4.1.8059.1.1.1.1.1.1.3.1.1
An entry containing information applicable to an ethernet Uplink Interface Module (UIM).
Indexes
uimCfgEthMumIndex uimCfgEthIndex
Column Syntax OID
uimCfgEthMumIndex
Translates to the physical slot number that a MUM200-2/2000-2 module
exists within a chassis. The Mini/Micro DSLAMs' physical location is
set to 1 by default. See below,

chassis type physical loc…
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.8059.1.1.1.1.1.1.3.1.1.1
uimCfgEthIndex
The physical slot used to access the UIM in the MUM200-2/2000-2 module or
Mini/Micro DSLAM.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.8059.1.1.1.1.1.1.3.1.1.2
uimCfgEthRxTxRate
The RxTx rate for an ethernet UIM.
Enumerationr/w
Enumerated Values:
0uimEthAutoNegotiate
1uimEth10
2uimEth100
3uimEthGig
 .1.3.6.1.4.1.8059.1.1.1.1.1.1.3.1.1.3
uimCfgEthDuplex
The current duplex setting for an ethernet UIM.
Enumerationr/w
Enumerated Values:
0uimEthAutoNegotiate
1uimEthHalf
2uimEthFull
 .1.3.6.1.4.1.8059.1.1.1.1.1.1.3.1.1.4

uimCfgT1Table

table
.1.3.6.1.4.1.8059.1.1.1.1.1.1.3.2 · 1 row entry · 5 columns
Open in standard view 
A list of T1 Uplink Interface Module (UIM) entries.
uimCfgT1Entry entry .1.3.6.1.4.1.8059.1.1.1.1.1.1.3.2.1
An entry containing information applicable to a T1 Uplink Interface Module (UIM).
Indexes
uimCfgT1MumIndex uimCfgT1Index
Column Syntax OID
uimCfgT1MumIndex
Translates to the physical slot number that a MUM200-2/2000-2 module
exists within a chassis. The Mini/Micro DSLAMs' physical location is
set to 1 by default. See below,

chassis type physical loc…
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.8059.1.1.1.1.1.1.3.2.1.1
uimCfgT1Index
The physical slot used to access the UIM in the MUM200-2/2000-2 module or
Mini/Micro DSLAM.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.8059.1.1.1.1.1.1.3.2.1.2
uimCfgT1Frame
The frame type parameter for a T1 UIM.
Enumerationr/w
Enumerated Values:
1uimT1ESF
2uimT1SFD4
 .1.3.6.1.4.1.8059.1.1.1.1.1.1.3.2.1.3
uimCfgT1LineCode
The line code parameter for a T1 UIM.
Enumerationr/w
Enumerated Values:
1uimT1B8ZS
2uimT1AMI
 .1.3.6.1.4.1.8059.1.1.1.1.1.1.3.2.1.4
uimCfgT1LineBuildout
The line buildout parameter for a T1 UIM.
Enumerationr/w
Enumerated Values:
1uimT10db
2uimT1N7p5db
3uimT1N15db
4uimT1N22p5db
 .1.3.6.1.4.1.8059.1.1.1.1.1.1.3.2.1.5

uimCfgE1Table

table
.1.3.6.1.4.1.8059.1.1.1.1.1.1.3.3 · 1 row entry · 4 columns
Open in standard view 
A list of E1 Uplink Interface Module (UIM) entries.
uimCfgE1Entry entry .1.3.6.1.4.1.8059.1.1.1.1.1.1.3.3.1
An entry containing information applicable to an E1 Uplink Interface Module (UIM).
Indexes
uimCfgE1MumIndex uimCfgE1Index
Column Syntax OID
uimCfgE1MumIndex
Translates to the physical slot number that a MUM200-2/2000-2 module
exists within a chassis. The Mini/Micro DSLAMs' physical location is
set to 1 by default. See below,

chassis type physical loc…
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.8059.1.1.1.1.1.1.3.3.1.1
uimCfgE1Index
The physical slot used to access the UIM in the MUM200-2/2000-2 module or
Mini/Micro DSLAM.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.8059.1.1.1.1.1.1.3.3.1.2
uimCfgE1Frame
The frame type parameter for an E1 UIM.
Enumerationr/w
Enumerated Values:
1uimE1CRC
2uimE1NoCRC
 .1.3.6.1.4.1.8059.1.1.1.1.1.1.3.3.1.3
uimCfgE1LineCode
The line code parameter for an E1 UIM.
Enumerationr/w
Enumerated Values:
1uimE1HDB3
2uimE1AMI
 .1.3.6.1.4.1.8059.1.1.1.1.1.1.3.3.1.4

snmpCfgNoticeIpTable

table
.1.3.6.1.4.1.8059.1.1.1.1.1.1.4.1 · 1 row entry · 2 columns
Open in standard view 
A list of SNMP trap notification Ip Addresses.
snmpCfgNoticeIpEntry entry .1.3.6.1.4.1.8059.1.1.1.1.1.1.4.1.1
An entry containing SNMP information applicable to a MUM200-2/MUM2000-2 module
or Mini/Micro DSLAM.
Indexes
snmpCfgNoticeIndex
Column Syntax OID
snmpCfgNoticeIndex
An integer value that points to one of four trap notification IP addresses.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.8059.1.1.1.1.1.1.4.1.1.1
snmpCfgNoticeIpAddress
IP Address of the location or computer to which you would like trap
notifications sent. The default value is 0.0.0.0 and it can be modified
by the user.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8059.1.1.1.1.1.1.4.1.1.2

advCfgTable

table
.1.3.6.1.4.1.8059.1.1.1.1.1.1.6.1 · 1 row entry · 6 columns
Open in standard view 
A list of the Advanced Configuration entries.
advCfgEntry entry .1.3.6.1.4.1.8059.1.1.1.1.1.1.6.1.1
An entry containing information applicable to an Advanced Configuration parameter.
Indexes
advCfgMumIndex
Column Syntax OID
advCfgMumIndex
Translates to the physical slot number that a MUM200-2/2000-2 module
exists within a chassis. The Mini/Micro DSLAMs' physical location is
set to 1 by default. See below,

chassis type physical loc…
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.8059.1.1.1.1.1.1.6.1.1.1
advCfgTFTPState
This configuration parameter allows the user the ability to disable, or enable,
the TFTP server.

By default, this object should have the value enabled(1).
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.8059.1.1.1.1.1.1.6.1.1.2
advCfgTelnetState
This configuration parameter allows the user the ability to disable, or enable,
telnet.

By default, this object should have the value enabled(1).
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.8059.1.1.1.1.1.1.6.1.1.3
advCfgMgmtFltrIpStart
The start value for the management IP filter range. This parameter
is initially set to a default filter range of 0.0.0.0 - 255.255.255.255.
Connection to the management system will be allowed only if the user's Ip
addre…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8059.1.1.1.1.1.1.6.1.1.4
advCfgMgmtFltrIpEnd
The end value for the management IP filter range. This parameter
is initially set to a default filter range of 0.0.0.0 - 255.255.255.255.
Connection to the management system will be allowed only if the user's Ip
address…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8059.1.1.1.1.1.1.6.1.1.5
advCfgMgmtSessionTimeout
This value defines the length of a password session in seconds. If the
session has been idle for a time greater than this value, the browser will
be challenged again, even if it has provided authentication credentials
…
NTNTECH-ROOT-MIBNtnTimeTicksr/w
Textual Convention: NTNTECH-ROOT-MIBNtnTimeTicks Integer32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8059.1.1.1.1.1.1.6.1.1.6

mgmtPortCfgTable

table
.1.3.6.1.4.1.8059.1.1.1.1.1.1.7.1 · 1 row entry · 4 columns
Open in standard view 
A list of the hardware platform management port entries.
mgmtPortCfgEntry entry .1.3.6.1.4.1.8059.1.1.1.1.1.1.7.1.1
An entry containing information applicable to the managment (ethernet type) port.
Indexes
mgmtPortCfgMumIndex
Column Syntax OID
mgmtPortCfgMumIndex
Translates to the physical slot number that a MUM200-2/2000-2 module
exists within a chassis. The Mini/Micro DSLAMs' physical location is
set to 1 by default. See below,

chassis type physical loc…
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.8059.1.1.1.1.1.1.7.1.1.1
mgmtPortCfgRxTxRate
Set the RxTx rate for an ethernet management port.
Enumerationr/w
Enumerated Values:
0uimEthAutoNegotiate
1uimEth10
2uimEth100
3uimEthGig
 .1.3.6.1.4.1.8059.1.1.1.1.1.1.7.1.1.2
mgmtPortCfgDuplex
Set the duplex setting for an ethernet management port.
Enumerationr/w
Enumerated Values:
0uimEthAutoNegotiate
1uimEthHalf
2uimEthFull
 .1.3.6.1.4.1.8059.1.1.1.1.1.1.7.1.1.3
mgmtPortCfgType
Set the management port type as follows. By setting this
port to mgmt(1), it will operate as a non-bridge mode connection.
Setting it to uplink(2), this port will operate like an uplink
interface module, i.e. a bridge m…
Enumerationr/w
Enumerated Values:
1mgmt
2uplink
 .1.3.6.1.4.1.8059.1.1.1.1.1.1.7.1.1.4