mumCfgIndex
NTNTECH-CHASSIS-CONFIGURATION-MIB ·
.1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.1
Object
column
Integer32
Translates to the physical slot number that a MUM200-2/2000-2 module
exists within a chassis. The Mini/Micro DSLAMs' physical location is
set to 1 by default. See below,
chassis type physical location(s) translation
------------ --------------------------------
IPD12000 MUM in slots 13,14 = mumCfgIndex 1,2 respecitively
IPD4000 MUM in slot 5 = mumCfgIndex 1
Mini DSLAM NA = mumCfgIndex 1
Micro DSLAM NA = mumCfgIndex 1
Context
- MIB
- NTNTECH-CHASSIS-CONFIGURATION-MIB
- OID
.1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.1- Type
- column
- Access
- readonly
- Status
- current
- Parent
- mumCfgEntry
- Table
- mumCfgTable
- Siblings
- 7
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-2
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mumCfgIpAddress IP Address assigned to a MUM200-2/2000-2 module or Mini/Micro DSLAM.
This parameter is initially set to a default value, i.e 192.168.254.252
for a MUM200-2/2000-2 module located i… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.2 |
| mumCfgSubnetMask The Subnet Mask assigned to a MUM200-2/2000-2 module or Mini/Micro DSLAM.
This parameter is assiged by the user, the default value is 255.255.255.0. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.3 |
| mumCfgDefaultGateway The Default Gateway assigned to a MUM200-2/2000-2 module or Mini/Micro DSLAM.
This value is assiged by the user, the default value is 0.0.0.0. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.4 |
| mumCfgInbandMgmt Inband management feature, when enabled [ON(1)], allows access to the
DSLAM via the network against an assigned IP address, subnet mask,
and default gateway. | column | Enumeration | .1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.5 |
| mumCfgInbandMGMTVlanID The IP DSLAM supports 802.1Q Virtual LANs (VLANs). This parameter
configuration applies to the inband management traffic only.
It does not apply to out of band tra… | column | Integer32 | .1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.6 |
| mumCfgInterConnection IPD12000 or IPD4000 DSLAM interconnect configuration provides the system
manager the ability to daisy-chain one IP DSLAM to another so that a single
router may be used for all DSL… | column | Enumeration | .1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.7 |
| mumCfgCommitChange Set to enabled(1) in order to commit the latest changes to the IP address, subnetmask,
default gateway chassis parameters. This is only applicable to the SNE2040G-P and the
SNE2… | column | Enumeration | .1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.8 |