mumCfgIpAddress

NTNTECH-CHASSIS-CONFIGURATION-MIB · .1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.2
MIB view Table view

Object

column r/w SNMPv2-SMIIpAddress 
IP Address assigned to a MUM200-2/2000-2 module or Mini/Micro DSLAM.
This parameter is initially set to a default value, i.e 192.168.254.252
for a MUM200-2/2000-2 module located in slot 13 of an IPD12000, slot 5
of an IPD4000 DSLAM and a Mini/Micro DSLAM. The default value of 
192.168.254.253 will be for a MUM200-2/2000-2 module located in slot 14 of
an IPD12000 (duplicate IP addresses	are not allowed). These default 
values can be modified by the user.

Context

MIB
NTNTECH-CHASSIS-CONFIGURATION-MIB
OID
.1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.2
Type
column
Access
readwrite
Status
current
Parent
mumCfgEntry
Table
mumCfgTable
Siblings
7

Syntax

SNMPv2-SMIIpAddress
Source
SNMPv2-SMIIpAddress
Base type
OctetString

Values & Constraints

Type Constraints
range: 4

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
mumCfgIndex
Translates to the physical slot number that a MUM200-2/2000-2 module exists within a chassis. The Mini/Micro DSLAMs' physical location is set to 1 by default. See below, …
columnInteger32.1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.1
mumCfgSubnetMask
The Subnet Mask assigned to a MUM200-2/2000-2 module or Mini/Micro DSLAM. This parameter is assiged by the user, the default value is 255.255.255.0.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.3
mumCfgDefaultGateway
The Default Gateway assigned to a MUM200-2/2000-2 module or Mini/Micro DSLAM. This value is assiged by the user, the default value is 0.0.0.0.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.4
mumCfgInbandMgmt
Inband management feature, when enabled [ON(1)], allows access to the DSLAM via the network against an assigned IP address, subnet mask, and default gateway.
columnEnumeration.1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.5
mumCfgInbandMGMTVlanID
The IP DSLAM supports 802.1Q Virtual LANs (VLANs). This parameter configuration applies to the inband management traffic only. It does not apply to out of band tra…
columnInteger32.1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.6
mumCfgInterConnection
IPD12000 or IPD4000 DSLAM interconnect configuration provides the system manager the ability to daisy-chain one IP DSLAM to another so that a single router may be used for all DSL…
columnEnumeration.1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.7
mumCfgCommitChange
Set to enabled(1) in order to commit the latest changes to the IP address, subnetmask, default gateway chassis parameters. This is only applicable to the SNE2040G-P and the SNE2…
columnEnumeration.1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.8