mumCfgInbandMGMTVlanID
NTNTECH-CHASSIS-CONFIGURATION-MIB ·
.1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.6
Object
column
r/w
Integer32
The IP DSLAM supports 802.1Q Virtual LANs (VLANs). This parameter
configuration applies to the inband management traffic only.
It does not apply to out of band traffic received from the MGMT port.
Note: for the case where the chassis type is an IPD12000 loaded with
two MUMs, the setting of this parameter will affect both.
Context
- MIB
- NTNTECH-CHASSIS-CONFIGURATION-MIB
- OID
.1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- mumCfgEntry
- Table
- mumCfgTable
- Siblings
- 7
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-4085
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mumCfgIndex Translates to the physical slot number that a MUM200-2/2000-2 module
exists within a chassis. The Mini/Micro DSLAMs' physical location is
set to 1 by default. See below,
… | column | Integer32 | .1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.1 |
| mumCfgIpAddress IP Address assigned to a MUM200-2/2000-2 module or Mini/Micro DSLAM.
This parameter is initially set to a default value, i.e 192.168.254.252
for a MUM200-2/2000-2 module located i… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.2 |
| mumCfgSubnetMask The Subnet Mask assigned to a MUM200-2/2000-2 module or Mini/Micro DSLAM.
This parameter is assiged by the user, the default value is 255.255.255.0. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.3 |
| mumCfgDefaultGateway The Default Gateway assigned to a MUM200-2/2000-2 module or Mini/Micro DSLAM.
This value is assiged by the user, the default value is 0.0.0.0. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.4 |
| mumCfgInbandMgmt Inband management feature, when enabled [ON(1)], allows access to the
DSLAM via the network against an assigned IP address, subnet mask,
and default gateway. | column | Enumeration | .1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.5 |
| mumCfgInterConnection IPD12000 or IPD4000 DSLAM interconnect configuration provides the system
manager the ability to daisy-chain one IP DSLAM to another so that a single
router may be used for all DSL… | column | Enumeration | .1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.7 |
| mumCfgCommitChange Set to enabled(1) in order to commit the latest changes to the IP address, subnetmask,
default gateway chassis parameters. This is only applicable to the SNE2040G-P and the
SNE2… | column | Enumeration | .1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.8 |