LUM-SOAM-PM-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
4
Rows
4
Columns
146
soamPmLmCfgTable
table.1.3.6.1.4.1.8708.2.60.2.2.1
·
1 row entry
·
25 columns
This table includes configuration objects and operations for the
Frame Loss Measurement function defined in [Y.1731] and [MEF SOAM-PM].
Each row in the table represents a Loss Measurement session for
the defined remote MEP.
The conceptual row of soamPmLmCfgTable.
Indexes
soamPmLmCfgIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
soamPmLmCfgIndex
An index to the Loss Measurement Configuration table which indicates
the specific measurement session for the MEP. The index is not persistent and may be reused between restarts. |
Unsigned32 Constraints: range: 1-4294967295 |
.1.3.6.1.4.1.8708.2.60.2.2.1.1.1 |
||||||||||||
|
soamPmLmCfgName
The name of the LM session.
The name has the same structure as the name of the remote mep. LM:megname:slot:subrack:mepid:<priority> The priority is not used for NID. |
LUM-TCMgmtNameString Textual Convention: LUM-TCMgmtNameString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.60.2.2.1.1.2 |
||||||||||||
|
soamPmLmCfgDescr
User configurable label for the LM session.
|
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.60.2.2.1.1.3 |
||||||||||||
|
soamPmLmCfgSubrack
The number of the subrack where this OAM object is defined
|
LUM-TCSubrackNumberr/w Textual Convention: LUM-TCSubrackNumber Unsigned32Type Constraints: range: 0..15 |
.1.3.6.1.4.1.8708.2.60.2.2.1.1.4 |
||||||||||||
|
soamPmLmCfgSlot
The slot where this OAM Object is defined.
|
LUM-TCSlotNumberr/w Textual Convention: LUM-TCSlotNumber Unsigned32Type Constraints: range: 0..22 |
.1.3.6.1.4.1.8708.2.60.2.2.1.1.5 |
||||||||||||
|
soamPmLmCfgEnabled
This object specifies whether the Loss Measurement session
is enabled. This Attribute is only used for NID, Admin status and oper status are used in EMXP. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.60.2.2.1.1.6 |
||||||||||||
|
soamPmLmCfgMessagePeriod
This object specifies the interval between Loss Measurement
OAM message transmission. For Loss Measurement monitoring applications the default value is 1 sec. This object can only be written at creation t… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.8708.2.60.2.2.1.1.7 |
||||||||||||
|
soamPmLmCfgDestMacAddress
The Target or Destination MAC Address Field to be transmitted.
This address will be used if the value of the object soamPmLmDestIsMepId is 'false'. This object can only be written at creati… |
SNMPv2-TCMacAddressr/w Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.8708.2.60.2.2.1.1.8 |
||||||||||||
|
soamPmLmCfgMepName
The identifier of the MEP this LM session belongs to.
Persistent cross-reference to MEP table. |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.60.2.2.1.1.9 |
||||||||||||
|
soamPmLmCfgMaidIdentifier
A unique user definied identifier for the MEG.
|
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.60.2.2.1.1.10 |
||||||||||||
|
soamPmLmCfgDestMepId
The Maintenance Association End Point Identifier of
another MEP in the same Maintenance Association to which the SOAM LM frame is to be sent. This address will be used if the value of the column soamPmLmD… |
IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w Textual Convention: IEEE8021-CFM-MIBDot1agCfmMepIdOrZero Unsigned32Type Constraints: range: 0..8191 |
.1.3.6.1.4.1.8708.2.60.2.2.1.1.11 |
||||||||||||
|
soamPmLmCfgDestIsMepId
A value of 'true' indicates that MEPID of the target MEP is used for
SOAM LM frame transmission. A value of 'false' indicates that the MAC address of the target MEP is used for SOAM LM frame transmission.… |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.60.2.2.1.1.12 |
||||||||||||
|
soamPmLmCfgInternalReference
For internal use only.
|
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.8708.2.60.2.2.1.1.13 |
||||||||||||
|
soamPmLmCfgLocalDeviceType
The type of device the LM is created and associated.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.8708.2.60.2.2.1.1.14 |
||||||||||||
|
soamPmLmCfgType
This object specifies what type of Loss Measurement
will be performed. lmLmm(1) LMM SOAM PDU generated and received LMR responses tracked lmSlm(2) SLM SOAM PDU generated and received SLR res… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.8708.2.60.2.2.1.1.15 |
||||||||||||
|
soamPmLmCfgPriority
This object specifies the Loss Measurement OAM message priority
as well as the priority of the service/OAM traffic to be monitored. If the session attibute soamPmLmCfgCosAwareness is 'priorityAware' then … |
IEEE8021-TC-MIBIEEE8021PriorityValuer/w Textual Convention: IEEE8021-TC-MIBIEEE8021PriorityValue Unsigned32Type Constraints: range: 0..7 |
.1.3.6.1.4.1.8708.2.60.2.2.1.1.16 |
||||||||||||
|
soamPmLmCfgAvailabilityFlrThreshold
This object specifies a configurable availability threshold to be
used in evaluating the availability/unavailability status of an availability indicator per MEF 10.2.1. The availability threshold range of 0.000 through … |
Unsigned32r/w Constraints: range: 0-100000 |
.1.3.6.1.4.1.8708.2.60.2.2.1.1.17 |
||||||||||||
|
soamPmLmCfgAvailabilityUasAlarmThreshold
This object specifies the configurable number of seconds
the session shall be determined to be unavailable before raising an alarm. |
Unsigned32r/w Constraints: range: 0-900 |
.1.3.6.1.4.1.8708.2.60.2.2.1.1.18 |
||||||||||||
|
soamPmLmCfgSessionType
This object indicates whether the current session is defined to
be 'Proactive' or 'On-Demand'. A value of 'proactive' indicates the current session is 'Proactive'. A value of 'onDemand' indicates the current session is … |
MEF-SOAM-TC-MIBMefSoamTcSessionTyper/w Textual Convention: MEF-SOAM-TC-MIBMefSoamTcSessionType EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.60.2.2.1.1.19 |
||||||||||||
|
soamPmLmCfgSessionStatus
This object indicates the current status of the LM session. A value
of 'active' indicates the current LM session is active, i.e. the current time lies between the start time and the stop time, and soamPmLmCfgEnabled is … |
MEF-SOAM-TC-MIBMefSoamTcStatusType Textual Convention: MEF-SOAM-TC-MIBMefSoamTcStatusType EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.60.2.2.1.1.20 |
||||||||||||
|
soamPmLmCfgCosAwareness
Define CoS awareness for the LM initiator.
A CoS aware LM Initiater will send counters associated with the priority of the sent LMM packets. priorityBlind - LM Initiator is Cos unaware (counters for all p… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.8708.2.60.2.2.1.1.21 |
||||||||||||
|
soamPmLmCfgRowStatus
Manages creation and deletion of conceptual rows.
See also SNMPv2-TC. Note: The newly created object will not necessarily receive the same index as used in the create procedure. This attribute can be writ… |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.60.2.2.1.1.22 |
||||||||||||
|
soamPmLmCfgAdminStatus
The administrative state for an LM Session.
down - The LM session should be inactive. service - The LM session is activated but alarms are suppressed. Intended for use during service or re-… |
LUM-TCBoardOrInterfaceAdminStatusr/w Textual Convention: LUM-TCBoardOrInterfaceAdminStatus EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.60.2.2.1.1.23 |
||||||||||||
|
soamPmLmCfgOperStatus
The operational state for the object.
notPresent - The object is not available. down - The object is de-activated or there are faults preventing its transition to the 'up' state. … |
LUM-TCBoardOrInterfaceOperStatus Textual Convention: LUM-TCBoardOrInterfaceOperStatus EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.60.2.2.1.1.24 |
||||||||||||
|
soamPmLmCfgStats
View current statistics for the LM session.
|
LUM-TCCommandString Textual Convention: LUM-TCCommandString OctetString |
.1.3.6.1.4.1.8708.2.60.2.2.1.1.25 |
soamPmLmStatsTable
table.1.3.6.1.4.1.8708.2.60.2.2.2
·
1 row entry
·
59 columns
This table contains the results for the current Measurement
Interval in a SOAM Loss Measurement session gathered during the interval
indicated by soamPmLmCfgMeasurementInterval.
A row in this table is created automatically
by the SNMP Agent when the Loss Measurement session is configured.
The conceptual row of soamPmLmStatsTable
Indexes
soamPmLmStatsIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
soamPmLmStatsIndex
The index for the current Measurement Interval for this
PM session. The index is the same as for the configuration, i.e soamPmLmCfgIndex and is not persistent and may be reused between restarts. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.1 |
||||
|
soamPmLmStatsLocalDeviceType
The type of device the LM is created and associated.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.8708.2.60.2.2.2.1.2 |
||||
|
soamPmLmStatsName
The name of the LM session, same as the name of remote MEP
that this LM session is associated with. |
LUM-TCMgmtNameString Textual Convention: LUM-TCMgmtNameString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.3 |
||||
|
soamPmLmStatsSubrack
The number of the subrack where this OAM object is defined
|
LUM-TCSubrackNumber Textual Convention: LUM-TCSubrackNumber Unsigned32Type Constraints: range: 0..15 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.4 |
||||
|
soamPmLmStatsSlot
The slot where this OAM Object is defined.
|
LUM-TCSlotNumber Textual Convention: LUM-TCSlotNumber Unsigned32Type Constraints: range: 0..22 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.5 |
||||
|
soamPmLmStatsMaidIdentifier
A unique user definied identifier for the MEG.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.6 |
||||
|
soamPmLmStatsDestMepId
The Maintenance Association End Point Identifier of
another MEP in the same Maintenance Association to which the SOAM LM frame is to be sent. This address will be used if the value of the column soamPmLmD… |
IEEE8021-CFM-MIBDot1agCfmMepIdOrZero Textual Convention: IEEE8021-CFM-MIBDot1agCfmMepIdOrZero Unsigned32Type Constraints: range: 0..8191 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.7 |
||||
|
soamPmLmStatsInternalReference
For internal use only.
|
Unsigned32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.8 |
||||
|
soamPmLmStatsMepName
The identifier of the MEP this LM session belongs to.
Persistent cross-reference to MEP table. |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.9 |
||||
|
soamPmLmStatsSuspect15Min
Whether the Measurement Interval has been marked as suspect.
The object is set to false at the start of a measurement interval. It is set to true when there is a discontinuity in the performance measureme… |
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.60.2.2.2.1.10 |
||||
|
soamPmLmStatsSuspectPrevious15Min
Whether the Measurement Interval has been marked as suspect.
The object is set to false at the start of a measurement interval. It is set to true when there is a discontinuity in the performance measureme… |
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.60.2.2.2.1.11 |
||||
|
soamPmLmStatsSuspect24H
Whether the Measurement Interval has been marked as suspect.
The object is set to false at the start of a measurement interval. It is set to true when there is a discontinuity in the performance measureme… |
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.60.2.2.2.1.12 |
||||
|
soamPmLmStatsReset15Min
Reset the 15 minute counters for the
LM session. After a successful reset the default value (normal) is restored in this action attribute. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.8708.2.60.2.2.2.1.13 |
||||
|
soamPmLmStatsReset24H
Reset the 24 hour counters for the LM session.
After a successful reset the default value (normal) is restored in this action attribute. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.8708.2.60.2.2.2.1.14 |
||||
|
soamPmLmStatsStartTime15Min
The time that the current Measurement Interval started.
|
SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime OctetStringType Constraints: range: 8range: 11 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.15 |
||||
|
soamPmLmStatsElapsedTime15Min
The time that the current Measurement Interval has been running, in seconds.
|
SNMPv2-TCTimeInterval Textual Convention: SNMPv2-TCTimeInterval Integer32Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.16 |
||||
|
soamPmLmStatsForwardTransmittedFrames15Min
This object contains the number of frames transmitted in the
forward direction by this MEP. For a PM Session of types lmLmm and lmCcm this includes Ethernet Service Frames and SOAM PDUs that are in a high… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.17 |
||||
|
soamPmLmStatsForwardReceivedFrames15Min
This object contains the number of frames received in the
forward direction by this MEP. For a PM Session of types lmLmm and lmCcm this includes Ethernet Service Frames and SOAM PDUs that are in a higher … |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.18 |
||||
|
soamPmLmStatsForwardMinFlr15Min
This object contains the minimum one-way frame loss
ratio (FLR) in the forward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed in percent with a value of 0.000 … |
Unsigned32 Constraints: range: 0-100000range: 4294967294-4294967294 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.19 |
||||
|
soamPmLmStatsForwardMaxFlr15Min
This object contains the maximum one-way frame loss
ratio (FLR) in the forward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed in percent with a value of 0.000 … |
Unsigned32 Constraints: range: 0-100000 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.20 |
||||
|
soamPmLmStatsForwardAvgFlr15Min
This object contains the average one-way frame loss
ratio (FLR) in the forward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed in percent with a value of 0.000 … |
Unsigned32 Constraints: range: 0-100000 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.21 |
||||
|
soamPmLmStatsForwardHighLoss15Min
This object is the number of high loss intervals (HLI) over
time in the forward direction. The value starts at 0 and increments for every HLI that occurs. This parameter is equivalent to 'L Sub T' found i… |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.22 |
||||
|
soamPmLmStatsBackwardTransmittedFrames15Min
This object contains the number of frames transmitted in the
backward direction by this MEP. For a PM Session of type lmLmm and lmCcm this includes Ethernet Service Frames and SOAM PDUs that are in a high… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.23 |
||||
|
soamPmLmStatsBackwardReceivedFrames15Min
This object contains the number of frames received in the
backward direction by this MEP. For a PM Session of type lmLmm this includes Ethernet Service Frames and SOAM PDUs that are in a higher MEG level … |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.24 |
||||
|
soamPmLmStatsBackwardMinFlr15Min
This object contains the minimum one-way frame loss
ratio (FLR) in the backward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed in percent with a value of 0.000… |
Unsigned32 Constraints: range: 0-100000range: 4294967294-4294967294 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.25 |
||||
|
soamPmLmStatsBackwardMaxFlr15Min
This object contains the maximum one-way frame loss
ratio (FLR) in the backward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed in percent with a value of 0.000… |
Unsigned32 Constraints: range: 0-100000 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.26 |
||||
|
soamPmLmStatsBackwardAvgFlr15Min
This object contains the average one-way frame loss
ratio (FLR) in the backward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed in percent with a value of 0.000… |
Unsigned32 Constraints: range: 0-100000range: 4294967295-4294967295 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.27 |
||||
|
soamPmLmStatsBackwardHighLoss15Min
This object is the number of high loss intervals (HLI) over
time in the backwards direction. The value starts at 0 and increments for every HLI that occurs. This parameter is equivalent to 'L Sub T' found… |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.28 |
||||
|
soamPmLmStatsUnavailableSeconds15Min
This object contains the number if seconds the service has been
been unavailable during the 15 min interval. The service has been unavailable when the FLR threshold is exceeded in either the forward or ba… |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.29 |
||||
|
soamPmLmStatsStartTimePrevious15Min
The time that the current Measurement Interval started.
|
SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime OctetStringType Constraints: range: 8range: 11 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.30 |
||||
|
soamPmLmStatsElapsedTimePrevious15Min
The time that the current Measurement Interval has been running, in seconds.
|
SNMPv2-TCTimeInterval Textual Convention: SNMPv2-TCTimeInterval Integer32Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.31 |
||||
|
soamPmLmStatsForwardTransmittedFramesPrevious15Min
This object contains the number of frames transmitted in the
forward direction by this MEP. For a PM Session of types lmLmm and lmCcm this includes Ethernet Service Frames and SOAM PDUs that are in a high… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.32 |
||||
|
soamPmLmStatsForwardReceivedFramesPrevious15Min
This object contains the number of frames received in the
forward direction by this MEP. For a PM Session of types lmLmm and lmCcm this includes Ethernet Service Frames and SOAM PDUs that are in a higher … |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.33 |
||||
|
soamPmLmStatsForwardMinFlrPrevious15Min
This object contains the minimum one-way frame loss
ratio (FLR) in the forward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed in percent with a value of 0.000 … |
Unsigned32 Constraints: range: 0-100000range: 4294967294-4294967294 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.34 |
||||
|
soamPmLmStatsForwardMaxFlrPrevious15Min
This object contains the maximum one-way frame loss
ratio (FLR) in the forward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed in percent with a value of 0.000 … |
Unsigned32 Constraints: range: 0-100000 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.35 |
||||
|
soamPmLmStatsForwardAvgFlrPrevious15Min
This object contains the average one-way frame loss
ratio (FLR) in the forward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed in percent with a value of 0.000 … |
Unsigned32 Constraints: range: 0-100000 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.36 |
||||
|
soamPmLmStatsForwardHighLossPrevious15Min
This object is the number of high loss intervals (HLI) over
time in the forward direction. The value starts at 0 and increments for every HLI that occurs. This parameter is equivalent to 'L Sub T' found i… |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.37 |
||||
|
soamPmLmStatsBackwardTransmittedFramesPrevious15Min
This object contains the number of frames transmitted in the
backward direction by this MEP. For a PM Session of type lmLmm and lmCcm this includes Ethernet Service Frames and SOAM PDUs that are in a high… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.38 |
||||
|
soamPmLmStatsBackwardReceivedFramesPrevious15Min
This object contains the number of frames received in the
backward direction by this MEP. For a PM Session of type lmLmm this includes Ethernet Service Frames and SOAM PDUs that are in a higher MEG level … |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.39 |
||||
|
soamPmLmStatsBackwardMinFlrPrevious15Min
This object contains the minimum one-way frame loss
ratio (FLR) in the backward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed in percent with a value of 0.000… |
Unsigned32 Constraints: range: 0-100000range: 4294967294-4294967294 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.40 |
||||
|
soamPmLmStatsBackwardMaxFlrPrevious15Min
This object contains the maximum one-way frame loss
ratio (FLR) in the backward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed percent with a value of 0.000 th… |
Unsigned32 Constraints: range: 0-100000 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.41 |
||||
|
soamPmLmStatsBackwardAvgFlrPrevious15Min
This object contains the average one-way frame loss
ratio (FLR) in the backward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed in percent with a value of 0.000… |
Unsigned32 Constraints: range: 0-100000 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.42 |
||||
|
soamPmLmStatsBackwardHighLossPrevious15Min
This object is the number of high loss intervals (HLI) over
time in the backwards direction. The value starts at 0 and increments for every HLI that occurs. This parameter is equivalent to 'L Sub T' found… |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.43 |
||||
|
soamPmLmStatsStartTime24H
The time that the current Measurement Interval started.
|
SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime OctetStringType Constraints: range: 8range: 11 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.44 |
||||
|
soamPmLmStatsElapsedTime24H
The time that the current Measurement Interval has been running, in seconds.
|
SNMPv2-TCTimeInterval Textual Convention: SNMPv2-TCTimeInterval Integer32Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.45 |
||||
|
soamPmLmStatsForwardTransmittedFrames24H
This object contains the number of frames transmitted in the
forward direction by this MEP. For a PM Session of types lmLmm and lmCcm this includes Ethernet Service Frames and SOAM PDUs that are in a high… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.46 |
||||
|
soamPmLmStatsForwardReceivedFrames24H
This object contains the number of frames received in the
forward direction by this MEP. For a PM Session of types lmLmm and lmCcm this includes Ethernet Service Frames and SOAM PDUs that are in a higher … |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.47 |
||||
|
soamPmLmStatsForwardMinFlr24H
This object contains the minimum one-way frame loss
ratio (FLR) in the forward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed in percent with a value of 0.000 … |
Unsigned32 Constraints: range: 0-100000range: 4294967294-4294967294 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.48 |
||||
|
soamPmLmStatsForwardMaxFlr24H
This object contains the maximum one-way frame loss
ratio (FLR) in the forward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed in percent with a value of 0.000 … |
Unsigned32 Constraints: range: 0-100000 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.49 |
||||
|
soamPmLmStatsForwardAvgFlr24H
This object contains the average one-way frame loss
ratio (FLR) in the forward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed in percent with a value of 0.000 … |
Unsigned32 Constraints: range: 0-100000 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.50 |
||||
|
soamPmLmStatsForwardHighLoss24H
This object is the number of high loss intervals (HLI) over
time in the forward direction. The value starts at 0 and increments for every HLI that occurs. This parameter is equivalent to 'L Sub T' found i… |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.51 |
||||
|
soamPmLmStatsBackwardTransmittedFrames24H
This object contains the number of frames transmitted in the
backward direction by this MEP. For a PM Session of type lmLmm and lmCcm this includes Ethernet Service Frames and SOAM PDUs that are in a high… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.52 |
||||
|
soamPmLmStatsBackwardReceivedFrames24H
This object contains the number of frames received in the
backward direction by this MEP. For a PM Session of type lmLmm this includes Ethernet Service Frames and SOAM PDUs that are in a higher MEG level … |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.53 |
||||
|
soamPmLmStatsBackwardMinFlr24H
This object contains the minimum one-way frame loss
ratio (FLR) in the backward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed in percent with a value of 0.000… |
Unsigned32 Constraints: range: 0-100000range: 4294967294-4294967294 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.54 |
||||
|
soamPmLmStatsBackwardMaxFlr24H
This object contains the maximum one-way frame loss
ratio (FLR) in the backward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed percent with a value of 0.000 th… |
Unsigned32 Constraints: range: 0-100000 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.55 |
||||
|
soamPmLmStatsBackwardAvgFlr24H
This object contains the average one-way frame loss
ratio (FLR) in the backward direction calculated by this MEP for this Measurement Interval. The FLR value is a ratio that is expressed in percent with a value of 0.000… |
Unsigned32 Constraints: range: 0-100000 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.56 |
||||
|
soamPmLmStatsBackwardHighLoss24H
This object is the number of high loss intervals (HLI) over
time in the backwards direction. The value starts at 0 and increments for every HLI that occurs. This parameter is equivalent to 'L Sub T' found… |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.57 |
||||
|
soamPmLmStatsUas
Unavailable seconds (UAS) 15 min threshold
exceeded. A: The number of unavailable seconds during a period exceeds the associated threshold. D: At the start of a new 15 minute period the ass… |
LUM-TCFaultStatus Textual Convention: LUM-TCFaultStatus EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.60.2.2.2.1.58 |
||||
|
soamPmLmStatsPriority
This object specifies the Loss Measurement OAM message priority
as well as the priority of the service/OAM traffic to be monitored. Only frames of the same Class of Service are counted. The default value … |
IEEE8021-TC-MIBIEEE8021PriorityValue Textual Convention: IEEE8021-TC-MIBIEEE8021PriorityValue Unsigned32Type Constraints: range: 0..7 |
.1.3.6.1.4.1.8708.2.60.2.2.2.1.59 |
soamPmDmCfgTable
table.1.3.6.1.4.1.8708.2.60.2.3.1
·
1 row entry
·
23 columns
This table includes configuration objects and operations for the
Delay Measurement function.
Each row in the table represents a Delay Measurement session for
the defined remote MEP.
The conceptual row of soamPmDmCfgTable.
Indexes
soamPmDmCfgIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
soamPmDmCfgIndex
An index to the Delay Measurement Configuration table which indicates
the specific measurement session for the MEP. The index is not persistent and may be reused between restarts. |
Unsigned32 Constraints: range: 1-4294967295 |
.1.3.6.1.4.1.8708.2.60.2.3.1.1.1 |
||||||||||||
|
soamPmDmCfgName
The name of the DM session.
The name has the same structure as the name of the remote mep. DM:megname:slot:subrack:mepid:<priority> The priority is not used for NID. |
LUM-TCMgmtNameString Textual Convention: LUM-TCMgmtNameString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.60.2.3.1.1.2 |
||||||||||||
|
soamPmDmCfgDescr
User configurable label for the DM session.
|
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.60.2.3.1.1.3 |
||||||||||||
|
soamPmDmCfgSubrack
The number of the subrack where this OAM object is defined
|
LUM-TCSubrackNumberr/w Textual Convention: LUM-TCSubrackNumber Unsigned32Type Constraints: range: 0..15 |
.1.3.6.1.4.1.8708.2.60.2.3.1.1.4 |
||||||||||||
|
soamPmDmCfgSlot
The slot where this OAM Object is defined.
|
LUM-TCSlotNumberr/w Textual Convention: LUM-TCSlotNumber Unsigned32Type Constraints: range: 0..22 |
.1.3.6.1.4.1.8708.2.60.2.3.1.1.5 |
||||||||||||
|
soamPmDmCfgInternalReference
For internal use only.
|
Unsigned32r/w Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.8708.2.60.2.3.1.1.6 |
||||||||||||
|
soamPmDmCfgLocalDeviceType
The type of device the DM is created and associated.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.8708.2.60.2.3.1.1.7 |
||||||||||||
|
soamPmDmCfgDropEligible
This object specifies the drop eligibility of a specific OAM frame.
Frames with ETH-DM information are always marked as drop ineligible. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.60.2.3.1.1.8 |
||||||||||||
|
soamPmDmCfgType
This object indicates what type of Delay Measurement is to
be performed. dmDmm(1) DMM SOAM PDU generated, DMR responses received (one-way or two-way measurements) dm1DmTx(2) … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.8708.2.60.2.3.1.1.9 |
||||||||||||
|
soamPmDmCfgEnabled
This object specifies whether the Delay Measurement session is
enabled. This Attribute is only used for NID, Admin status and oper status are used in EMXP. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.60.2.3.1.1.10 |
||||||||||||
|
soamPmDmCfgMessagePeriod
This object specifies the interval between Delay Measurement
OAM message transmission. For Delay Measurement monitoring applications, the default value is 100ms s. This object can only be written at creat… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.8708.2.60.2.3.1.1.11 |
||||||||||||
|
soamPmDmCfgPriority
This object specifies the priority of frames with
Delay Measurement OAM message information. This object can only be written at creation time and cannot be modified once it has been created. |
IEEE8021-TC-MIBIEEE8021PriorityValuer/w Textual Convention: IEEE8021-TC-MIBIEEE8021PriorityValue Unsigned32Type Constraints: range: 0..7 |
.1.3.6.1.4.1.8708.2.60.2.3.1.1.12 |
||||||||||||
|
soamPmDmCfgDestMacAddress
The Target or Destination MAC Address Field to be transmitted.
This object can only be written at creation time and cannot be modified once it has been created. |
SNMPv2-TCMacAddressr/w Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.8708.2.60.2.3.1.1.13 |
||||||||||||
|
soamPmDmCfgMepName
The identifier of the MEP this DM session belongs to.
Persistent cross-reference to MEP table. |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.60.2.3.1.1.14 |
||||||||||||
|
soamPmDmCfgMaidIdentifier
A unique user definied identifier for the MEG.
|
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.60.2.3.1.1.15 |
||||||||||||
|
soamPmDmCfgDestMepId
The Maintenance Association End Point Identifier of
another MEP in the same Maintenance Association to which the SOAM DM frame is to be sent. This address will be used if the value of the column soamPmDmD… |
IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w Textual Convention: IEEE8021-CFM-MIBDot1agCfmMepIdOrZero Unsigned32Type Constraints: range: 0..8191 |
.1.3.6.1.4.1.8708.2.60.2.3.1.1.16 |
||||||||||||
|
soamPmDmCfgDestIsMepId
A value of 'true' indicates that MEPID of the target MEP is used for
SOAM DM frame transmission. A value of 'false' indicates that the destination MAC address of the target MEP is used for SOAM DM frame t… |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.60.2.3.1.1.17 |
||||||||||||
|
soamPmDmCfgSessionType
This object indicates whether the current session is defined to
be 'Proactive' or 'On-Demand'. A value of 'proactive' indicates the current session is 'Proactive'. A value of 'onDemand' indicates the current session is … |
MEF-SOAM-TC-MIBMefSoamTcSessionTyper/w Textual Convention: MEF-SOAM-TC-MIBMefSoamTcSessionType EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.60.2.3.1.1.18 |
||||||||||||
|
soamPmDmCfgSessionStatus
This object indicates the current status of the DM session. A value
of 'active' indicates the current DM session is active. A value of 'notActive' indicates the current DM session is not active. This attibute is only su… |
MEF-SOAM-TC-MIBMefSoamTcStatusType Textual Convention: MEF-SOAM-TC-MIBMefSoamTcStatusType EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.60.2.3.1.1.19 |
||||||||||||
|
soamPmDmCfgRowStatus
Manages creation and deletion of conceptual rows.
See also SNMPv2-TC. Note: The newly created object will not necessarily receive the same index as used in the create procedure. This attribute can be writ… |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.60.2.3.1.1.20 |
||||||||||||
|
soamPmDmCfgAdminStatus
The administrative state for a DM Session.
down - The DM session should be inactive. service - The DM session is activated but alarms are suppressed. Intended for use during service or re-c… |
LUM-TCBoardOrInterfaceAdminStatusr/w Textual Convention: LUM-TCBoardOrInterfaceAdminStatus EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.60.2.3.1.1.21 |
||||||||||||
|
soamPmDmCfgOperStatus
The operational state for the object.
notPresent - The object is not available. down - The object is de-activated or there are faults preventing its transition to the 'up' state. … |
LUM-TCBoardOrInterfaceOperStatus Textual Convention: LUM-TCBoardOrInterfaceOperStatus EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.60.2.3.1.1.22 |
||||||||||||
|
soamPmDmCfgStats
View current statistics for the DM session.
|
LUM-TCCommandString Textual Convention: LUM-TCCommandString OctetString |
.1.3.6.1.4.1.8708.2.60.2.3.1.1.23 |
soamPmDmStatsTable
table.1.3.6.1.4.1.8708.2.60.2.3.2
·
1 row entry
·
39 columns
This table contains the results for the current Measurement
Interval in a SOAM Delay Measurement session gathered during the interval
indicated by soamPmLmCfgMeasurementInterval.
A row in this table is created automatically
by the SNMP Agent when the Delay Measurement session is configured.
The conceptual row of soamPmDmStatsTable
Indexes
soamPmDmStatsIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
soamPmDmStatsIndex
The index for the current Measurement Interval for this
PM session. The index is the same as for the configuration, i.e soamPmDmCfgIndex and is not persistent and may be reused between restarts. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.8708.2.60.2.3.2.1.1 |
||||
|
soamPmDmStatsLocalDeviceType
The type of device the DM is created and associated.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.8708.2.60.2.3.2.1.2 |
||||
|
soamPmDmStatsName
The name of the DM session, same as the name of remote MEP
that this DM session is associated with. |
LUM-TCMgmtNameString Textual Convention: LUM-TCMgmtNameString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.60.2.3.2.1.3 |
||||
|
soamPmDmStatsSubrack
The number of the subrack where this OAM object is defined
|
LUM-TCSubrackNumber Textual Convention: LUM-TCSubrackNumber Unsigned32Type Constraints: range: 0..15 |
.1.3.6.1.4.1.8708.2.60.2.3.2.1.4 |
||||
|
soamPmDmStatsSlot
The slot where this OAM Object is defined.
|
LUM-TCSlotNumber Textual Convention: LUM-TCSlotNumber Unsigned32Type Constraints: range: 0..22 |
.1.3.6.1.4.1.8708.2.60.2.3.2.1.5 |
||||
|
soamPmDmStatsMaidIdentifier
A unique user definied identifier for the MEG.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.60.2.3.2.1.6 |
||||
|
soamPmDmStatsDestMepId
The Maintenance Association End Point Identifier of
another MEP in the same Maintenance Association to which the SOAM LM frame is to be sent. This address will be used if the value of the column soamPmLmD… |
IEEE8021-CFM-MIBDot1agCfmMepIdOrZero Textual Convention: IEEE8021-CFM-MIBDot1agCfmMepIdOrZero Unsigned32Type Constraints: range: 0..8191 |
.1.3.6.1.4.1.8708.2.60.2.3.2.1.7 |
||||
|
soamPmDmStatsInternalReference
For internal use only.
|
Unsigned32 Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.8708.2.60.2.3.2.1.8 |
||||
|
soamPmDmStatsMepName
The identifier of the MEP this DM session belongs to.
Persistent cross-reference to MEP table. |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.60.2.3.2.1.9 |
||||
|
soamPmDmStatsSuspect15Min
Whether the Measurement Interval has been marked as suspect.
The object is to be set to false at the start of a measurement interval. It is set to true when there is a discontinuity in the performance mea… |
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.60.2.3.2.1.10 |
||||
|
soamPmDmStatsSuspectPrevious15Min
Whether the Measurement Interval has been marked as suspect.
The object is to be set to false at the start of a measurement interval. It is set to true when there is a discontinuity in the performance mea… |
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.60.2.3.2.1.11 |
||||
|
soamPmDmStatsSuspect24H
Whether the Measurement Interval has been marked as suspect.
The object is to be set to false at the start of a measurement interval. It is set to true when there is a discontinuity in the performance mea… |
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.60.2.3.2.1.12 |
||||
|
soamPmDmStatsReset15Min
Reset the 15 minute counters for the
DM session. After a successful reset the default value (normal) is restored in this action attribute. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.8708.2.60.2.3.2.1.13 |
||||
|
soamPmDmStatsReset24H
Reset the 24 hour counters for the DM session.
After a successful reset the default value (normal) is restored in this action attribute. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.8708.2.60.2.3.2.1.14 |
||||
|
soamPmDmStatsStartTime15Min
The time that the current Measurement Interval started.
|
SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime OctetStringType Constraints: range: 8range: 11 |
.1.3.6.1.4.1.8708.2.60.2.3.2.1.15 |
||||
|
soamPmDmStatsElapsedTime15Min
The time that the current Measurement Interval has been running, in seconds.
|
SNMPv2-TCTimeInterval Textual Convention: SNMPv2-TCTimeInterval Integer32Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.8708.2.60.2.3.2.1.16 |
||||
|
soamPmDmStatsFrameDelayTwoWayMin15Min
This object contains the minimum two-way frame delay
calculated by this MEP for this Measurement Interval. This object is undefined is soamPmDmCfgType is dm1DmTx or dm1DmRx. Unit is micro-seconds. |
Unsigned32 Constraints: range: 0-100000range: 4294967294-4294967294 |
.1.3.6.1.4.1.8708.2.60.2.3.2.1.17 |
||||
|
soamPmDmStatsFrameDelayTwoWayMax15Min
This object contains the maximum two-way frame delay
calculated by this MEP for this Measurement Interval. This object is undefined is soamPmDmCfgType is dm1DmTx or dm1DmRx. Unit is micro-seconds. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.8708.2.60.2.3.2.1.18 |
||||
|
soamPmDmStatsFrameDelayTwoWayAvg15Min
This object contains the average two-way frame delay
calculated by this MEP for this Measurement Interval. This object is undefined is soamPmDmCfgType is dm1DmTx or dm1DmRx. Unit is micro-seconds. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.8708.2.60.2.3.2.1.19 |
||||
|
soamPmDmStatsIfdvTwoWayMin15Min
This object contains the minimum two-way inter-frame delay
interval calculated by this MEP for this Measurement Interval. The value of this object is undefined when soamPmDmCfgType is dm1DmTx or dm1DmRx. … |
LUM-TCUnsigned32WithNA Textual Convention: LUM-TCUnsigned32WithNA Unsigned32Type Constraints: range: 0..4294967294 |
.1.3.6.1.4.1.8708.2.60.2.3.2.1.20 |
||||
|
soamPmDmStatsIfdvTwoWayMax15Min
This object contains the maximum two-way inter-frame delay
interval calculated by this MEP for this Measurement Interval. The value of this object is undefined when soamPmDmCfgType is dm1DmTx or dm1DmRx. … |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.8708.2.60.2.3.2.1.21 |
||||
|
soamPmDmStatsIfdvTwoWayAvg15Min
This object contains the average two-way inter-frame delay
interval calculated by this MEP for this Measurement Interval. The value of this object is undefined when soamPmDmCfgType is dm1DmTx or dm1DmRx. … |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.8708.2.60.2.3.2.1.22 |
||||
|
soamPmDmStatsStartTimePrevious15Min
The time that the current Measurement Interval started.
|
SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime OctetStringType Constraints: range: 8range: 11 |
.1.3.6.1.4.1.8708.2.60.2.3.2.1.23 |
||||
|
soamPmDmStatsElapsedTimePrevious15Min
The time that the current Measurement Interval has been running, in seconds.
|
SNMPv2-TCTimeInterval Textual Convention: SNMPv2-TCTimeInterval Integer32Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.8708.2.60.2.3.2.1.24 |
||||
|
soamPmDmStatsFrameDelayTwoWayMinPrevious15Min
This object contains the minimum two-way frame delay
calculated by this MEP for this Measurement Interval. This object is undefined is soamPmDmCfgType is dm1DmTx or dm1DmRx. Unit is micro-seconds. |
LUM-TCUnsigned32WithNA Textual Convention: LUM-TCUnsigned32WithNA Unsigned32Type Constraints: range: 0..4294967294 |
.1.3.6.1.4.1.8708.2.60.2.3.2.1.25 |
||||
|
soamPmDmStatsFrameDelayTwoWayMaxPrevious15Min
This object contains the maximum two-way frame delay
calculated by this MEP for this Measurement Interval. This object is undefined is soamPmDmCfgType is dm1DmTx or dm1DmRx. Unit is micro-seconds. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.8708.2.60.2.3.2.1.26 |
||||
|
soamPmDmStatsFrameDelayTwoWayAvgPrevious15Min
This object contains the average two-way frame delay
calculated by this MEP for this Measurement Interval. This object is undefined is soamPmDmCfgType is dm1DmTx or dm1DmRx. Unit is micro-seconds. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.8708.2.60.2.3.2.1.27 |
||||
|
soamPmDmStatsIfdvTwoWayMinPrevious15Min
This object contains the minimum two-way inter-frame delay
interval calculated by this MEP for this Measurement Interval. The value of this object is undefined when soamPmDmCfgType is dm1DmTx or dm1DmRx. … |
LUM-TCUnsigned32WithNA Textual Convention: LUM-TCUnsigned32WithNA Unsigned32Type Constraints: range: 0..4294967294 |
.1.3.6.1.4.1.8708.2.60.2.3.2.1.28 |
||||
|
soamPmDmStatsIfdvTwoWayMaxPrevious15Min
This object contains the maximum two-way inter-frame delay
interval calculated by this MEP for this Measurement Interval. The value of this object is undefined when soamPmDmCfgType is dm1DmTx or dm1DmRx. … |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.8708.2.60.2.3.2.1.29 |
||||
|
soamPmDmStatsIfdvTwoWayAvgPrevious15Min
This object contains the average two-way inter-frame delay
interval calculated by this MEP for this Measurement Interval. The value of this object is undefined when soamPmDmCfgType is dm1DmTx or dm1DmRx. … |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.8708.2.60.2.3.2.1.30 |
||||
|
soamPmDmStatsStartTime24H
The time that the current Measurement Interval started.
|
SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime OctetStringType Constraints: range: 8range: 11 |
.1.3.6.1.4.1.8708.2.60.2.3.2.1.31 |
||||
|
soamPmDmStatsElapsedTime24H
The time that the current Measurement Interval has been running, in seconds.
|
SNMPv2-TCTimeInterval Textual Convention: SNMPv2-TCTimeInterval Integer32Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.8708.2.60.2.3.2.1.32 |
||||
|
soamPmDmStatsFrameDelayTwoWayMin24H
This object contains the minimum two-way frame delay
calculated by this MEP for this Measurement Interval. This object is undefined is soamPmDmCfgType is dm1DmTx or dm1DmRx. Unit is micro-seconds. |
LUM-TCUnsigned32WithNA Textual Convention: LUM-TCUnsigned32WithNA Unsigned32Type Constraints: range: 0..4294967294 |
.1.3.6.1.4.1.8708.2.60.2.3.2.1.33 |
||||
|
soamPmDmStatsFrameDelayTwoWayMax24H
This object contains the maximum two-way frame delay
calculated by this MEP for this Measurement Interval. This object is undefined is soamPmDmCfgType is dm1DmTx or dm1DmRx. Unit is micro-seconds. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.8708.2.60.2.3.2.1.34 |
||||
|
soamPmDmStatsFrameDelayTwoWayAvg24H
This object contains the average two-way frame delay
calculated by this MEP for this Measurement Interval. This object is undefined is soamPmDmCfgType is dm1DmTx or dm1DmRx. Unit is micro-seconds. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.8708.2.60.2.3.2.1.35 |
||||
|
soamPmDmStatsIfdvTwoWayMin24H
This object contains the minimum two-way inter-frame delay
interval calculated by this MEP for this Measurement Interval. The value of this object is undefined when soamPmDmCfgType is dm1DmTx or dm1DmRx. … |
LUM-TCUnsigned32WithNA Textual Convention: LUM-TCUnsigned32WithNA Unsigned32Type Constraints: range: 0..4294967294 |
.1.3.6.1.4.1.8708.2.60.2.3.2.1.36 |
||||
|
soamPmDmStatsIfdvTwoWayMax24H
This object contains the maximum two-way inter-frame delay
interval calculated by this MEP for this Measurement Interval. The value of this object is undefined when soamPmDmCfgType is dm1DmTx or dm1DmRx. … |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.8708.2.60.2.3.2.1.37 |
||||
|
soamPmDmStatsIfdvTwoWayAvg24H
This object contains the average two-way inter-frame delay
interval calculated by this MEP for this Measurement Interval. The value of this object is undefined when soamPmDmCfgType is dm1DmTx or dm1DmRx. … |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.8708.2.60.2.3.2.1.38 |
||||
|
soamPmDmStatsPriority
This object specifies the priority of frames with
Delay Measurement OAM message information. The default value is to be the value which yields the lowest frame loss. This object can only be… |
IEEE8021-TC-MIBIEEE8021PriorityValue Textual Convention: IEEE8021-TC-MIBIEEE8021PriorityValue Unsigned32Type Constraints: range: 0..7 |
.1.3.6.1.4.1.8708.2.60.2.3.2.1.39 |