soamPmLmStatsPriority
LUM-SOAM-PM-MIB ·
.1.3.6.1.4.1.8708.2.60.2.2.2.1.59
Object
column
IEEE8021-TC-MIBIEEE8021PriorityValue
This object specifies the Loss Measurement OAM message priority
as well as the priority of the service/OAM traffic to be monitored.
Only frames of the same Class of Service are counted.
The default value is to be the value which yields the lowest frame
loss.
This object is not applicable if soamPmLmCfgType is set to lmCcm.
This object can only be written at creation time and cannot be
modified once it has been created.
Context
- MIB
- LUM-SOAM-PM-MIB
- OID
.1.3.6.1.4.1.8708.2.60.2.2.2.1.59- Type
- column
- Access
- readonly
- Status
- current
- Parent
- soamPmLmStatsEntry
- Table
- soamPmLmStatsTable
- Siblings
- 58
Syntax
IEEE8021-TC-MIBIEEE8021PriorityValue
- Source
- IEEE8021-TC-MIBIEEE8021PriorityValue
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..7
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| soamPmLmStatsIndex The index for the current Measurement Interval for this
PM session.
The index is the same as for the configuration, i.e soamPmLmCfgIndex
and is not persistent and may be reused be… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.1 |
| soamPmLmStatsSuspect15Min Whether the Measurement Interval has been marked as suspect.
The object is set to false at the start of a measurement
interval. It is set to true when there is a di… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8708.2.60.2.2.2.1.10 |
| soamPmLmStatsSuspectPrevious15Min Whether the Measurement Interval has been marked as suspect.
The object is set to false at the start of a measurement
interval. It is set to true when there is a di… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8708.2.60.2.2.2.1.11 |
| soamPmLmStatsSuspect24H Whether the Measurement Interval has been marked as suspect.
The object is set to false at the start of a measurement
interval. It is set to true when there is a di… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8708.2.60.2.2.2.1.12 |
| soamPmLmStatsReset15Min Reset the 15 minute counters for the
LM session.
After a successful reset the default value
(normal) is restored in this action attribute. | column | Enumeration | .1.3.6.1.4.1.8708.2.60.2.2.2.1.13 |
| soamPmLmStatsReset24H Reset the 24 hour counters for the LM session.
After a successful reset the default value
(normal) is restored in this action attribute. | column | Enumeration | .1.3.6.1.4.1.8708.2.60.2.2.2.1.14 |
| soamPmLmStatsStartTime15Min The time that the current Measurement Interval started. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.8708.2.60.2.2.2.1.15 |
| soamPmLmStatsElapsedTime15Min The time that the current Measurement Interval has been running, in seconds. | column | SNMPv2-TCTimeInterval | .1.3.6.1.4.1.8708.2.60.2.2.2.1.16 |
| soamPmLmStatsForwardTransmittedFrames15Min This object contains the number of frames transmitted in the
forward direction by this MEP.
For a PM Session of types lmLmm and lmCcm this includes Ethernet
Service… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.17 |
| soamPmLmStatsForwardReceivedFrames15Min This object contains the number of frames received in the
forward direction by this MEP.
For a PM Session of types lmLmm and lmCcm this includes Ethernet
Service Fr… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.18 |
| soamPmLmStatsForwardMinFlr15Min This object contains the minimum one-way frame loss
ratio (FLR) in the forward direction calculated by this MEP for this
Measurement Interval. The FLR value is a ratio that is exp… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.19 |
| soamPmLmStatsLocalDeviceType The type of device the LM is created and associated. | column | Enumeration | .1.3.6.1.4.1.8708.2.60.2.2.2.1.2 |
| soamPmLmStatsForwardMaxFlr15Min This object contains the maximum one-way frame loss
ratio (FLR) in the forward direction calculated by this MEP for this
Measurement Interval. The FLR value is a ratio that is exp… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.20 |
| soamPmLmStatsForwardAvgFlr15Min This object contains the average one-way frame loss
ratio (FLR) in the forward direction calculated by this MEP for this
Measurement Interval. The FLR value is a ratio that is exp… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.21 |
| soamPmLmStatsForwardHighLoss15Min This object is the number of high loss intervals (HLI) over
time in the forward direction.
The value starts at 0 and increments for every HLI that occurs.
This para… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.22 |
| soamPmLmStatsBackwardTransmittedFrames15Min This object contains the number of frames transmitted in the
backward direction by this MEP.
For a PM Session of type lmLmm and lmCcm this includes Ethernet
Service… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.23 |
| soamPmLmStatsBackwardReceivedFrames15Min This object contains the number of frames received in the
backward direction by this MEP.
For a PM Session of type lmLmm this includes Ethernet
Service Frames and S… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.24 |
| soamPmLmStatsBackwardMinFlr15Min This object contains the minimum one-way frame loss
ratio (FLR) in the backward direction calculated by this MEP for
this Measurement Interval. The FLR value is a ratio that is ex… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.25 |
| soamPmLmStatsBackwardMaxFlr15Min This object contains the maximum one-way frame loss
ratio (FLR) in the backward direction calculated by this MEP for
this Measurement Interval. The FLR value is a ratio that is ex… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.26 |
| soamPmLmStatsBackwardAvgFlr15Min This object contains the average one-way frame loss
ratio (FLR) in the backward direction calculated by this MEP for
this Measurement Interval. The FLR value is a ratio that is ex… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.27 |
| soamPmLmStatsBackwardHighLoss15Min This object is the number of high loss intervals (HLI) over
time in the backwards direction.
The value starts at 0 and increments for every HLI that occurs.
This pa… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.28 |
| soamPmLmStatsUnavailableSeconds15Min This object contains the number if seconds the service has been
been unavailable during the 15 min interval.
The service has been unavailable when the FLR threshold… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.29 |
| soamPmLmStatsName The name of the LM session, same as the name of remote MEP
that this LM session is associated with. | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.60.2.2.2.1.3 |
| soamPmLmStatsStartTimePrevious15Min The time that the current Measurement Interval started. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.8708.2.60.2.2.2.1.30 |
| soamPmLmStatsElapsedTimePrevious15Min The time that the current Measurement Interval has been running, in seconds. | column | SNMPv2-TCTimeInterval | .1.3.6.1.4.1.8708.2.60.2.2.2.1.31 |
| soamPmLmStatsForwardTransmittedFramesPrevious15Min This object contains the number of frames transmitted in the
forward direction by this MEP.
For a PM Session of types lmLmm and lmCcm this includes Ethernet
Service… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.32 |
| soamPmLmStatsForwardReceivedFramesPrevious15Min This object contains the number of frames received in the
forward direction by this MEP.
For a PM Session of types lmLmm and lmCcm this includes Ethernet
Service Fr… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.33 |
| soamPmLmStatsForwardMinFlrPrevious15Min This object contains the minimum one-way frame loss
ratio (FLR) in the forward direction calculated by this MEP for this
Measurement Interval. The FLR value is a ratio that is exp… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.34 |
| soamPmLmStatsForwardMaxFlrPrevious15Min This object contains the maximum one-way frame loss
ratio (FLR) in the forward direction calculated by this MEP for this
Measurement Interval. The FLR value is a ratio that is exp… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.35 |
| soamPmLmStatsForwardAvgFlrPrevious15Min This object contains the average one-way frame loss
ratio (FLR) in the forward direction calculated by this MEP for this
Measurement Interval. The FLR value is a ratio that is exp… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.36 |
| soamPmLmStatsForwardHighLossPrevious15Min This object is the number of high loss intervals (HLI) over
time in the forward direction.
The value starts at 0 and increments for every HLI that occurs.
This para… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.37 |
| soamPmLmStatsBackwardTransmittedFramesPrevious15Min This object contains the number of frames transmitted in the
backward direction by this MEP.
For a PM Session of type lmLmm and lmCcm this includes Ethernet
Service… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.38 |
| soamPmLmStatsBackwardReceivedFramesPrevious15Min This object contains the number of frames received in the
backward direction by this MEP.
For a PM Session of type lmLmm this includes Ethernet
Service Frames and S… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.39 |
| soamPmLmStatsSubrack The number of the subrack where this OAM object is defined | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.60.2.2.2.1.4 |
| soamPmLmStatsBackwardMinFlrPrevious15Min This object contains the minimum one-way frame loss
ratio (FLR) in the backward direction calculated by this MEP for
this Measurement Interval. The FLR value is a ratio that is ex… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.40 |
| soamPmLmStatsBackwardMaxFlrPrevious15Min This object contains the maximum one-way frame loss
ratio (FLR) in the backward direction calculated by this MEP for
this Measurement Interval. The FLR value is a ratio that is ex… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.41 |
| soamPmLmStatsBackwardAvgFlrPrevious15Min This object contains the average one-way frame loss
ratio (FLR) in the backward direction calculated by this MEP for
this Measurement Interval. The FLR value is a ratio that is ex… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.42 |
| soamPmLmStatsBackwardHighLossPrevious15Min This object is the number of high loss intervals (HLI) over
time in the backwards direction.
The value starts at 0 and increments for every HLI that occurs.
This pa… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.43 |
| soamPmLmStatsStartTime24H The time that the current Measurement Interval started. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.8708.2.60.2.2.2.1.44 |
| soamPmLmStatsElapsedTime24H The time that the current Measurement Interval has been running, in seconds. | column | SNMPv2-TCTimeInterval | .1.3.6.1.4.1.8708.2.60.2.2.2.1.45 |
| soamPmLmStatsForwardTransmittedFrames24H This object contains the number of frames transmitted in the
forward direction by this MEP.
For a PM Session of types lmLmm and lmCcm this includes Ethernet
Service… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.46 |
| soamPmLmStatsForwardReceivedFrames24H This object contains the number of frames received in the
forward direction by this MEP.
For a PM Session of types lmLmm and lmCcm this includes Ethernet
Service Fr… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.47 |
| soamPmLmStatsForwardMinFlr24H This object contains the minimum one-way frame loss
ratio (FLR) in the forward direction calculated by this MEP for this
Measurement Interval. The FLR value is a ratio that is exp… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.48 |
| soamPmLmStatsForwardMaxFlr24H This object contains the maximum one-way frame loss
ratio (FLR) in the forward direction calculated by this MEP for this
Measurement Interval. The FLR value is a ratio that is exp… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.49 |
| soamPmLmStatsSlot The slot where this OAM Object is defined. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.60.2.2.2.1.5 |
| soamPmLmStatsForwardAvgFlr24H This object contains the average one-way frame loss
ratio (FLR) in the forward direction calculated by this MEP for this
Measurement Interval. The FLR value is a ratio that is exp… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.50 |
| soamPmLmStatsForwardHighLoss24H This object is the number of high loss intervals (HLI) over
time in the forward direction.
The value starts at 0 and increments for every HLI that occurs.
This para… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.51 |
| soamPmLmStatsBackwardTransmittedFrames24H This object contains the number of frames transmitted in the
backward direction by this MEP.
For a PM Session of type lmLmm and lmCcm this includes Ethernet
Service… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.52 |
| soamPmLmStatsBackwardReceivedFrames24H This object contains the number of frames received in the
backward direction by this MEP.
For a PM Session of type lmLmm this includes Ethernet
Service Frames and S… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.53 |
| soamPmLmStatsBackwardMinFlr24H This object contains the minimum one-way frame loss
ratio (FLR) in the backward direction calculated by this MEP for
this Measurement Interval. The FLR value is a ratio that is ex… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.54 |
| soamPmLmStatsBackwardMaxFlr24H This object contains the maximum one-way frame loss
ratio (FLR) in the backward direction calculated by this MEP for
this Measurement Interval. The FLR value is a ratio that is ex… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.55 |
| soamPmLmStatsBackwardAvgFlr24H This object contains the average one-way frame loss
ratio (FLR) in the backward direction calculated by this MEP for
this Measurement Interval. The FLR value is a ratio that is ex… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.56 |
| soamPmLmStatsBackwardHighLoss24H This object is the number of high loss intervals (HLI) over
time in the backwards direction.
The value starts at 0 and increments for every HLI that occurs.
This pa… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.57 |
| soamPmLmStatsUas Unavailable seconds (UAS) 15 min threshold
exceeded.
A: The number of unavailable seconds during a
period exceeds the associated threshold.
D: At the… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.60.2.2.2.1.58 |
| soamPmLmStatsMaidIdentifier A unique user definied identifier for the MEG. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.60.2.2.2.1.6 |
| soamPmLmStatsDestMepId The Maintenance Association End Point Identifier of
another MEP in the same Maintenance Association to which
the SOAM LM frame is to be sent.
This address will be u… | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.8708.2.60.2.2.2.1.7 |
| soamPmLmStatsInternalReference For internal use only. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.60.2.2.2.1.8 |
| soamPmLmStatsMepName The identifier of the MEP this LM session belongs to.
Persistent cross-reference to MEP table. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.60.2.2.2.1.9 |