soamPmLmCfgDestMepId

LUM-SOAM-PM-MIB · .1.3.6.1.4.1.8708.2.60.2.2.1.1.11
MIB view Table view

Object

column r/w IEEE8021-CFM-MIBDot1agCfmMepIdOrZero 
The Maintenance Association End Point Identifier of
another MEP in the same Maintenance Association to which
the SOAM LM frame is to be sent.
              
This address will be used if the value of the column
soamPmLmDestIsMepId is 'true'. A value of zero
means that the destination MEP ID has not been configured.
              
This object can only be written at creation time and cannot be
modified once it has been created.

Context

MIB
LUM-SOAM-PM-MIB
OID
.1.3.6.1.4.1.8708.2.60.2.2.1.1.11
Type
column
Access
readwrite
Status
current
Parent
soamPmLmCfgEntry
Table
soamPmLmCfgTable
Siblings
24

Syntax

IEEE8021-CFM-MIBDot1agCfmMepIdOrZero
Source
IEEE8021-CFM-MIBDot1agCfmMepIdOrZero
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..8191

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
soamPmLmCfgIndex
An index to the Loss Measurement Configuration table which indicates the specific measurement session for the MEP. The index is not persistent and may be reused between restarts.
columnUnsigned32.1.3.6.1.4.1.8708.2.60.2.2.1.1.1
soamPmLmCfgMaidIdentifier
A unique user definied identifier for the MEG.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.8708.2.60.2.2.1.1.10
soamPmLmCfgDestIsMepId
A value of 'true' indicates that MEPID of the target MEP is used for SOAM LM frame transmission. A value of 'false' indicates that the MAC address of the target MEP…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.8708.2.60.2.2.1.1.12
soamPmLmCfgInternalReference
For internal use only.
columnUnsigned32.1.3.6.1.4.1.8708.2.60.2.2.1.1.13
soamPmLmCfgLocalDeviceType
The type of device the LM is created and associated.
columnEnumeration.1.3.6.1.4.1.8708.2.60.2.2.1.1.14
soamPmLmCfgType
This object specifies what type of Loss Measurement will be performed. lmLmm(1) LMM SOAM PDU generated and received LMR responses tracked lmSlm(2) SLM…
columnEnumeration.1.3.6.1.4.1.8708.2.60.2.2.1.1.15
soamPmLmCfgPriority
This object specifies the Loss Measurement OAM message priority as well as the priority of the service/OAM traffic to be monitored. If the session attibute soamPmLm…
columnIEEE8021-TC-MIBIEEE8021PriorityValue.1.3.6.1.4.1.8708.2.60.2.2.1.1.16
soamPmLmCfgAvailabilityFlrThreshold
This object specifies a configurable availability threshold to be used in evaluating the availability/unavailability status of an availability indicator per MEF 10.2.1. The availa…
columnUnsigned32.1.3.6.1.4.1.8708.2.60.2.2.1.1.17
soamPmLmCfgAvailabilityUasAlarmThreshold
This object specifies the configurable number of seconds the session shall be determined to be unavailable before raising an alarm.
columnUnsigned32.1.3.6.1.4.1.8708.2.60.2.2.1.1.18
soamPmLmCfgSessionType
This object indicates whether the current session is defined to be 'Proactive' or 'On-Demand'. A value of 'proactive' indicates the current session is 'Proactive'. A value of 'onD…
columnMEF-SOAM-TC-MIBMefSoamTcSessionType.1.3.6.1.4.1.8708.2.60.2.2.1.1.19
soamPmLmCfgName
The name of the LM session. The name has the same structure as the name of the remote mep. LM:megname:slot:subrack:mepid:<priority> The priority is not used for NID.
columnLUM-TCMgmtNameString.1.3.6.1.4.1.8708.2.60.2.2.1.1.2
soamPmLmCfgSessionStatus
This object indicates the current status of the LM session. A value of 'active' indicates the current LM session is active, i.e. the current time lies between the start time and t…
columnMEF-SOAM-TC-MIBMefSoamTcStatusType.1.3.6.1.4.1.8708.2.60.2.2.1.1.20
soamPmLmCfgCosAwareness
Define CoS awareness for the LM initiator. A CoS aware LM Initiater will send counters associated with the priority of the sent LMM packets. priorityBlind - LM Init…
columnEnumeration.1.3.6.1.4.1.8708.2.60.2.2.1.1.21
soamPmLmCfgRowStatus
Manages creation and deletion of conceptual rows. See also SNMPv2-TC. Note: The newly created object will not necessarily receive the same index as used in the crea…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.8708.2.60.2.2.1.1.22
soamPmLmCfgAdminStatus
The administrative state for an LM Session. down - The LM session should be inactive. service - The LM session is activated but alarms are suppressed…
columnLUM-TCBoardOrInterfaceAdminStatus.1.3.6.1.4.1.8708.2.60.2.2.1.1.23
soamPmLmCfgOperStatus
The operational state for the object. notPresent - The object is not available. down - The object is de-activated or there are faults preventing its …
columnLUM-TCBoardOrInterfaceOperStatus.1.3.6.1.4.1.8708.2.60.2.2.1.1.24
soamPmLmCfgStats
View current statistics for the LM session.
columnLUM-TCCommandString.1.3.6.1.4.1.8708.2.60.2.2.1.1.25
soamPmLmCfgDescr
User configurable label for the LM session.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.8708.2.60.2.2.1.1.3
soamPmLmCfgSubrack
The number of the subrack where this OAM object is defined
columnLUM-TCSubrackNumber.1.3.6.1.4.1.8708.2.60.2.2.1.1.4
soamPmLmCfgSlot
The slot where this OAM Object is defined.
columnLUM-TCSlotNumber.1.3.6.1.4.1.8708.2.60.2.2.1.1.5
soamPmLmCfgEnabled
This object specifies whether the Loss Measurement session is enabled. This Attribute is only used for NID, Admin status and oper status are used in EMXP.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.8708.2.60.2.2.1.1.6
soamPmLmCfgMessagePeriod
This object specifies the interval between Loss Measurement OAM message transmission. For Loss Measurement monitoring applications the default value is 1 sec. This …
columnEnumeration.1.3.6.1.4.1.8708.2.60.2.2.1.1.7
soamPmLmCfgDestMacAddress
The Target or Destination MAC Address Field to be transmitted. This address will be used if the value of the object soamPmLmDestIsMepId is 'false'. T…
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.8708.2.60.2.2.1.1.8
soamPmLmCfgMepName
The identifier of the MEP this LM session belongs to. Persistent cross-reference to MEP table.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.8708.2.60.2.2.1.1.9