LUM-IFAMPLIFIER-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
70

ifAmplifierAmplifierTable

table
.1.3.6.1.4.1.8708.2.65.2.2.1 · 1 row entry · 18 columns
Open in standard view 
The amplifier group contains information and
configuration for all amplifier objects.
The group is used for objects common for any amplifier type.
ifAmplifierAmplifierEntry entry .1.3.6.1.4.1.8708.2.65.2.2.1.1
An entry in the ifAmplifier amplifier list.
Indexes
ifAmplifierAmplifierIndex
Column Syntax OID
ifAmplifierAmplifierIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.1
ifAmplifierAmplifierName
The management name of the amplifier object.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.2
ifAmplifierAmplifierUId
A unique identifier assigned to each entry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.3
ifAmplifierAmplifierRxPower
The received signal power level in units of 0.1 dBm.
LUM-TCSigned32WithNA
Textual Convention: LUM-TCSigned32WithNA Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.4
ifAmplifierAmplifierTxPower
The transmitted power level in units of 0.1 dBm.
LUM-TCSigned32WithNA
Textual Convention: LUM-TCSigned32WithNA Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.5
ifAmplifierAmplifierWantedGain
The wanted signal gain setting in units of 0.1 dB.

Range and default value depends on type of amplifier, see table below.

Name Min Max Default
OARAED21…
LUM-TCSigned32WithNAr/w
Textual Convention: LUM-TCSigned32WithNA Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.6
ifAmplifierAmplifierActualGain
Actual measured gain in units of 0.1 dB.
LUM-TCSigned32WithNA
Textual Convention: LUM-TCSigned32WithNA Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.7
ifAmplifierAmplifierAdminStatus
The administrative state of the interface.

up - The interface is active.
Pump(s) are activated if all activation criteria are fulfilled.

down - The interface is de-activated. All pumps…
LUM-TCAdminStatusWithNAr/w
Textual Convention: LUM-TCAdminStatusWithNA Enumeration
Type Values:
1down
2service
3up
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.8
ifAmplifierAmplifierOperStatus
The operational state of the interface.

notPresent - The interface is not available.

down - The interface is de-activated or there are
faults preventing its transition to the 'up' state.
…
LUM-TCOperStatusWithNA
Textual Convention: LUM-TCOperStatusWithNA Enumeration
Type Values:
1notPresent
2down
3up
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.9
ifAmplifierAmplifierMidStageLoss
The calculated loss between the two amplifier stages in units of 0.1 dB.
LUM-TCSigned32WithNA
Textual Convention: LUM-TCSigned32WithNA Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.10
ifAmplifierAmplifierTxIfIndex
The index number of the associated Tx port.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.11
ifAmplifierAmplifierRxIfIndex
The index number of the associated Rx port.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.12
ifAmplifierAmplifierSubrack
The subrack of the entry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.13
ifAmplifierAmplifierSlot
The slot of the entry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.14
ifAmplifierAmplifierOutputPowerFail
Output power failed alarm. If the difference of wanted gain
and actual gain is larger than the safety margin and if the difference of
output power and transmit power limit is larger than 0.7 dB
the amplifier is not work…
LUM-TCFaultStatusWithNA
Textual Convention: LUM-TCFaultStatusWithNA Enumeration
Type Values:
1ok
2alarm
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.15
ifAmplifierAmplifierSaturation
Saturation alarm. If the difference of wanted gain and actual gain
is larger than 1.0 dB (safety margin) the amplifier is considered saturated.
LUM-TCFaultStatusWithNA
Textual Convention: LUM-TCFaultStatusWithNA Enumeration
Type Values:
1ok
2alarm
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.16
ifAmplifierAmplifierFunctionalType
The functional type of amplifier. This attribute is ONLY used
to describe how the amplifier is used and traffic is not affected if changed.

undefined - default

preAmp - pre-ampli…
Enumerationr/w
Enumerated Values:
1undefined
2preAmp
3offLinePreAmp
4lineAmp
5booster
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.17
ifAmplifierAmplifierDescr
User configurable label.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.18

ifAmplifierModuleTable

table
.1.3.6.1.4.1.8708.2.65.2.3.1 · 1 row entry · 12 columns
Open in standard view 
The module group contains information and
configuration for all module objects.
The group is used for representation of hardware modules on the board.
ifAmplifierModuleEntry entry .1.3.6.1.4.1.8708.2.65.2.3.1.1
An entry in the ifAmplifier module list.
Indexes
ifAmplifierModuleIndex
Column Syntax OID
ifAmplifierModuleIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.3.1.1.1
ifAmplifierModuleName
The management name of the module object.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.65.2.3.1.1.2
ifAmplifierModuleUId
A unique identifier assigned to each entry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.3.1.1.3
ifAmplifierModuleTemperature
The actual module temperature in units of
0.1 degrees Celsius.
LUM-TCInteger32WithNA
Textual Convention: LUM-TCInteger32WithNA Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.8708.2.65.2.3.1.1.4
ifAmplifierModuleInfo
Module information about firmware and serial number of the module on the board.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.65.2.3.1.1.5
ifAmplifierModuleHighModuleTemperature
The actual temperature is over the module internal temperature alarm threshold.
LUM-TCFaultStatusWithNA
Textual Convention: LUM-TCFaultStatusWithNA Enumeration
Type Values:
1ok
2alarm
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.65.2.3.1.1.6
ifAmplifierModuleHighPumpCurrent
The actual pump current of any pump in the module
is over the module internal pump current alarm threshold.
LUM-TCFaultStatusWithNA
Textual Convention: LUM-TCFaultStatusWithNA Enumeration
Type Values:
1ok
2alarm
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.65.2.3.1.1.7
ifAmplifierModuleHighPumpTemperature
The actual pump temperature of any pump in the module
is over the module internal pump temperature alarm threshold.
LUM-TCFaultStatusWithNA
Textual Convention: LUM-TCFaultStatusWithNA Enumeration
Type Values:
1ok
2alarm
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.65.2.3.1.1.8
ifAmplifierModuleCommunicationFailure
Communication between the module and the traffic unit has
failed.

A: The module does not respond.

D: Communication works.
LUM-TCFaultStatusWithNA
Textual Convention: LUM-TCFaultStatusWithNA Enumeration
Type Values:
1ok
2alarm
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.65.2.3.1.1.9
ifAmplifierModuleColdRestart
Software initiated cold restart of the Amplifier Module.
Cold restart process may take a few seconds, during this period traffic will be disturbed.
Enumerationr/w
Enumerated Values:
1doSoftwareColdRestart
2doNotSoftwareColdRestart
 .1.3.6.1.4.1.8708.2.65.2.3.1.1.10
ifAmplifierModuleSubrack
The subrack of the entry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.3.1.1.11
ifAmplifierModuleSlot
The slot of the entry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.3.1.1.12

ifAmplifierRamanTable

table
.1.3.6.1.4.1.8708.2.65.2.4.1 · 1 row entry · 22 columns
Open in standard view 
The Raman group contains information and
configuration for all Raman objects.
The group is used for representation of amplifiers of Raman type.
ifAmplifierRamanEntry entry .1.3.6.1.4.1.8708.2.65.2.4.1.1
An entry in the ifAmplifier Raman list.
Indexes
ifAmplifierRamanIndex
Column Syntax OID
ifAmplifierRamanIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.1
ifAmplifierRamanName
The management name of the Raman object.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.2
ifAmplifierRamanUId
A unique identifier assigned to each entry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.3
ifAmplifierRamanLineFiberType
Line fiber type setting for the Raman amplifier.
Enumerationr/w
Enumerated Values:
1ftG652
2ftG655
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.4
ifAmplifierRamanWantedGainTilt
The wanted Raman gain tilt. A negative value will amplify
shorter wavelengths more than longer wavelengths.
Integer32r/w
Constraints:
range: -15-5
range: 2147483647-2147483647
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.5
ifAmplifierRamanReceivedPowerLevel
The received power level on the Raman input interface.
The presented power level includes both signal and optical noise.
In contrast Raman Rx power level only presents signal input.
LUM-TCSigned32WithNA
Textual Convention: LUM-TCSigned32WithNA Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.6
ifAmplifierRamanPump1Power
Pump power of the first Raman pump in units of 0.1 dBm.
LUM-TCSigned32WithNA
Textual Convention: LUM-TCSigned32WithNA Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.7
ifAmplifierRamanPump1Status
Status of the first Raman pump. Can take values on or off.
Enumeration
Enumerated Values:
0off
1on
2147483646notAvailable
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.8
ifAmplifierRamanPump2Power
Pump power of the second Raman pump in units of 0.1 dBm.
LUM-TCSigned32WithNA
Textual Convention: LUM-TCSigned32WithNA Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.9
ifAmplifierRamanPump2Status
Status of the second Raman pump. Can take values on or off.
Enumeration
Enumerated Values:
0off
1on
2147483646notAvailable
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.10
ifAmplifierRamanTotalPumpPower
Combined Raman Pumps power in units of 0.1 dBm.
This is the total optical power that will enter through Raman Rx port into the line fiber.
LUM-TCSigned32WithNA
Textual Convention: LUM-TCSigned32WithNA Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.11
ifAmplifierRamanBackReflectionPower
The Back reflected power of the Raman pump in units of 0.1 dBm.
LUM-TCSigned32WithNA
Textual Convention: LUM-TCSigned32WithNA Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.12
ifAmplifierRamanBackReflectionPowerRatio
The Back reflected power ratio of the Raman pump.
This parameter is calculated by dividing the Total pump power by
the back reflected power of the Raman.
Presented in units of 0.1 dB.
LUM-TCSigned32WithNA
Textual Convention: LUM-TCSigned32WithNA Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.13
ifAmplifierRamanHighBackReflection
High Back Reflection. When back reflection power ratio
is below the High back reflection threshold the alarm is activated.
LUM-TCFaultStatusWithNA
Textual Convention: LUM-TCFaultStatusWithNA Enumeration
Type Values:
1ok
2alarm
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.14
ifAmplifierRamanHighBackReflectionThld
High Back Reflection Threshold. The threshold to trigger
the High back reflection alarm.
Integer32r/w
Constraints:
range: 200-280
range: 2147483647-2147483647
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.15
ifAmplifierRamanPointInsertionLoss
Point Insertion Loss. The calculated insertion loss between
the Raman pump and line fiber. Value is given in units of 0.1 dB
and cannot be positive. Recommended value is between 0.0 and -0.5 dB.
LUM-TCSigned32WithNA
Textual Convention: LUM-TCSigned32WithNA Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.16
ifAmplifierRamanPointInsertionLossThld
Point Insertion Loss Threshold. Settable threshold for High point
insertion loss alarm. If Point insertion loss is more negative than
threshold High point insertion loss alarm will be activated.
The recommended value fo…
LUM-TCSigned32WithNAr/w
Textual Convention: LUM-TCSigned32WithNA Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.17
ifAmplifierRamanHighPointInsertionLoss
High Point Insertion Loss. If Point insertion loss is below Point insertion loss threshold
High point insertion loss alarm will be activated.
LUM-TCFaultStatusWithNA
Textual Convention: LUM-TCFaultStatusWithNA Enumeration
Type Values:
1ok
2alarm
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.18
ifAmplifierRamanRelatedAmplifierIndex
The index number of the associated Amplifier object.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.19
ifAmplifierRamanSubrack
The subrack of the entry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.20
ifAmplifierRamanSlot
The slot of the entry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.21
ifAmplifierRamanActualGain
The actual gain contribution of the Raman amplifier stage.
LUM-TCSigned32WithNA
Textual Convention: LUM-TCSigned32WithNA Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.22

ifAmplifierEdfaTable

table
.1.3.6.1.4.1.8708.2.65.2.5.1 · 1 row entry · 18 columns
Open in standard view 
The edfa group contains information and
configuration for all EDFA objects.
The group is used for representation of amplifiers of EDFA type.
ifAmplifierEdfaEntry entry .1.3.6.1.4.1.8708.2.65.2.5.1.1
An entry in the ifAmplifier EDFA list.
Indexes
ifAmplifierEdfaIndex
Column Syntax OID
ifAmplifierEdfaIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.1
ifAmplifierEdfaName
The management name of the EDFA object.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.2
ifAmplifierEdfaUId
A unique identifier assigned to each entry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.3
ifAmplifierEdfaWantedGainTilt
The wanted EDFA gain tilt. A negative value will amplify
shorter wavelengths more than longer wavelengths.

Range and default value depends on type of amplifier.
OARAED21/HG
Min: -2
Max: 0
Default: -1
…
Integer32r/w
Constraints:
range: -20-0
range: 2147483647-2147483647
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.4
ifAmplifierEdfaTxPowerLimit
Settable limit for maximum allowed output power.

Range and default value depends on type of amplifier.

Name Min Max Default
OARAED21/HG 15.0 21…
LUM-TCSigned32WithNAr/w
Textual Convention: LUM-TCSigned32WithNA Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.5
ifAmplifierEdfaPumpStatus
Status of the EDFA pump. Can take values on or off.
Enumeration
Enumerated Values:
0off
1on
2147483646notAvailable
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.6
ifAmplifierEdfaBackReflectionPower
The Back reflected power of the EDFA output in units of 0.1 dBm.
LUM-TCSigned32WithNA
Textual Convention: LUM-TCSigned32WithNA Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.7
ifAmplifierEdfaBackReflectionPowerRatio
The Back reflected power ratio of the EDFA output.
This parameter is calculated by dividing the EDFA
output power by the back reflected power of the EDFA.
Presented in units of 0.1 dB.
LUM-TCSigned32WithNA
Textual Convention: LUM-TCSigned32WithNA Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.8
ifAmplifierEdfaHighBackReflection
High Back Reflection. When back reflection power ratio
is below the High back reflection threshold the alarm is activated.
LUM-TCFaultStatusWithNA
Textual Convention: LUM-TCFaultStatusWithNA Enumeration
Type Values:
1ok
2alarm
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.9
ifAmplifierEdfaHighBackReflectionThld
High Back Reflection Threshold.
The threshold to trigger the High back reflection alarm.
Integer32r/w
Constraints:
range: 200-280
range: 2147483647-2147483647
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.10
ifAmplifierEdfaSaturation deprecated
Saturation alarm. If the difference of wanted gain and actual gain
is larger than 1.0 dB the amplifier is considered saturated.
LUM-TCFaultStatusWithNA
Textual Convention: LUM-TCFaultStatusWithNA Enumeration
Type Values:
1ok
2alarm
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.11
ifAmplifierEdfaMonitorPortLoss
Monitor port loss. The difference in attenuation between EDFA output and EDFA monitor port.
This is a value that is module specific and is presented in units of 0.1 dB.
LUM-TCSigned32WithNA
Textual Convention: LUM-TCSigned32WithNA Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.12
ifAmplifierEdfaRelatedAmplifierIndex
The index number of the associated Amplifier object.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.13
ifAmplifierEdfaSubrack
The subrack of the entry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.14
ifAmplifierEdfaSlot
The slot of the entry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.15
ifAmplifierEdfaPumpPower
Pump power of the EDFA pump in units of 0.1 dBm.
LUM-TCSigned32WithNA
Textual Convention: LUM-TCSigned32WithNA Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.16
ifAmplifierEdfaPumpCurrent
Pump current of the EDFA pump in units of 0.1 mA.
LUM-TCSigned32WithNA
Textual Convention: LUM-TCSigned32WithNA Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.17
ifAmplifierEdfaActualGain
The actual gain contribution of the EDFA amplifier stage.
LUM-TCSigned32WithNA
Textual Convention: LUM-TCSigned32WithNA Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.18