ifAmplifierAmplifierDescr
LUM-IFAMPLIFIER-MIB ·
.1.3.6.1.4.1.8708.2.65.2.2.1.1.18
Object
User configurable label.
Context
- MIB
- LUM-IFAMPLIFIER-MIB
- OID
.1.3.6.1.4.1.8708.2.65.2.2.1.1.18- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ifAmplifierAmplifierEntry
- Table
- ifAmplifierAmplifierTable
- Siblings
- 17
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ifAmplifierAmplifierIndex An index assigned to each entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.65.2.2.1.1.1 |
| ifAmplifierAmplifierMidStageLoss The calculated loss between the two amplifier stages in units of 0.1 dB. | column | LUM-TCSigned32WithNA | .1.3.6.1.4.1.8708.2.65.2.2.1.1.10 |
| ifAmplifierAmplifierTxIfIndex The index number of the associated Tx port. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.65.2.2.1.1.11 |
| ifAmplifierAmplifierRxIfIndex The index number of the associated Rx port. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.65.2.2.1.1.12 |
| ifAmplifierAmplifierSubrack The subrack of the entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.65.2.2.1.1.13 |
| ifAmplifierAmplifierSlot The slot of the entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.65.2.2.1.1.14 |
| ifAmplifierAmplifierOutputPowerFail Output power failed alarm. If the difference of wanted gain
and actual gain is larger than the safety margin and if the difference of
output power and transmit power limit is larg… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.65.2.2.1.1.15 |
| ifAmplifierAmplifierSaturation Saturation alarm. If the difference of wanted gain and actual gain
is larger than 1.0 dB (safety margin) the amplifier is considered saturated. | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.65.2.2.1.1.16 |
| ifAmplifierAmplifierFunctionalType The functional type of amplifier. This attribute is ONLY used
to describe how the amplifier is used and traffic is not affected if changed.
undefined - default
… | column | Enumeration | .1.3.6.1.4.1.8708.2.65.2.2.1.1.17 |
| ifAmplifierAmplifierName The management name of the amplifier object. | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.65.2.2.1.1.2 |
| ifAmplifierAmplifierUId A unique identifier assigned to each entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.65.2.2.1.1.3 |
| ifAmplifierAmplifierRxPower The received signal power level in units of 0.1 dBm. | column | LUM-TCSigned32WithNA | .1.3.6.1.4.1.8708.2.65.2.2.1.1.4 |
| ifAmplifierAmplifierTxPower The transmitted power level in units of 0.1 dBm. | column | LUM-TCSigned32WithNA | .1.3.6.1.4.1.8708.2.65.2.2.1.1.5 |
| ifAmplifierAmplifierWantedGain The wanted signal gain setting in units of 0.1 dB.
Range and default value depends on type of amplifier, see table below.
Name … | column | LUM-TCSigned32WithNA | .1.3.6.1.4.1.8708.2.65.2.2.1.1.6 |
| ifAmplifierAmplifierActualGain Actual measured gain in units of 0.1 dB. | column | LUM-TCSigned32WithNA | .1.3.6.1.4.1.8708.2.65.2.2.1.1.7 |
| ifAmplifierAmplifierAdminStatus The administrative state of the interface.
up - The interface is active.
Pump(s) are activated if all activation criteria are fulfilled.
down - … | column | LUM-TCAdminStatusWithNA | .1.3.6.1.4.1.8708.2.65.2.2.1.1.8 |
| ifAmplifierAmplifierOperStatus The operational state of the interface.
notPresent - The interface is not available.
down - The interface is de-activated or there are
faults prevent… | column | LUM-TCOperStatusWithNA | .1.3.6.1.4.1.8708.2.65.2.2.1.1.9 |