ifAmplifierAmplifierAdminStatus

LUM-IFAMPLIFIER-MIB · .1.3.6.1.4.1.8708.2.65.2.2.1.1.8
MIB view Table view

Object

column r/w LUM-TCAdminStatusWithNA 
The administrative state of the interface.
              
up - The interface is active.
     Pump(s) are activated if all activation criteria are fulfilled.
              
down - The interface is de-activated. All pumps are shut off.
              
service - The interface is activated but alarms are suppressed.
Intended for use during service or re-configuration.
When service is concluded adminStatus should be set to 'up' again.
Note that there is no difference between 'up' and 'service',
if no alarms can be raised from this object.

Context

MIB
LUM-IFAMPLIFIER-MIB
OID
.1.3.6.1.4.1.8708.2.65.2.2.1.1.8
Type
column
Access
readwrite
Status
current
Parent
ifAmplifierAmplifierEntry
Table
ifAmplifierAmplifierTable
Siblings
17

Syntax

LUM-TCAdminStatusWithNA
Source
LUM-TCAdminStatusWithNA
Base type
Enumeration

Values & Constraints

Type Values
1down
2service
3up
2147483647notApplicable

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ifAmplifierAmplifierIndex
An index assigned to each entry.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.8708.2.65.2.2.1.1.1
ifAmplifierAmplifierMidStageLoss
The calculated loss between the two amplifier stages in units of 0.1 dB.
columnLUM-TCSigned32WithNA.1.3.6.1.4.1.8708.2.65.2.2.1.1.10
ifAmplifierAmplifierTxIfIndex
The index number of the associated Tx port.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.8708.2.65.2.2.1.1.11
ifAmplifierAmplifierRxIfIndex
The index number of the associated Rx port.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.8708.2.65.2.2.1.1.12
ifAmplifierAmplifierSubrack
The subrack of the entry.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.8708.2.65.2.2.1.1.13
ifAmplifierAmplifierSlot
The slot of the entry.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.8708.2.65.2.2.1.1.14
ifAmplifierAmplifierOutputPowerFail
Output power failed alarm. If the difference of wanted gain and actual gain is larger than the safety margin and if the difference of output power and transmit power limit is larg…
columnLUM-TCFaultStatusWithNA.1.3.6.1.4.1.8708.2.65.2.2.1.1.15
ifAmplifierAmplifierSaturation
Saturation alarm. If the difference of wanted gain and actual gain is larger than 1.0 dB (safety margin) the amplifier is considered saturated.
columnLUM-TCFaultStatusWithNA.1.3.6.1.4.1.8708.2.65.2.2.1.1.16
ifAmplifierAmplifierFunctionalType
The functional type of amplifier. This attribute is ONLY used to describe how the amplifier is used and traffic is not affected if changed. undefined - default …
columnEnumeration.1.3.6.1.4.1.8708.2.65.2.2.1.1.17
ifAmplifierAmplifierDescr
User configurable label.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.8708.2.65.2.2.1.1.18
ifAmplifierAmplifierName
The management name of the amplifier object.
columnLUM-TCMgmtNameString.1.3.6.1.4.1.8708.2.65.2.2.1.1.2
ifAmplifierAmplifierUId
A unique identifier assigned to each entry.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.8708.2.65.2.2.1.1.3
ifAmplifierAmplifierRxPower
The received signal power level in units of 0.1 dBm.
columnLUM-TCSigned32WithNA.1.3.6.1.4.1.8708.2.65.2.2.1.1.4
ifAmplifierAmplifierTxPower
The transmitted power level in units of 0.1 dBm.
columnLUM-TCSigned32WithNA.1.3.6.1.4.1.8708.2.65.2.2.1.1.5
ifAmplifierAmplifierWantedGain
The wanted signal gain setting in units of 0.1 dB. Range and default value depends on type of amplifier, see table below. Name …
columnLUM-TCSigned32WithNA.1.3.6.1.4.1.8708.2.65.2.2.1.1.6
ifAmplifierAmplifierActualGain
Actual measured gain in units of 0.1 dB.
columnLUM-TCSigned32WithNA.1.3.6.1.4.1.8708.2.65.2.2.1.1.7
ifAmplifierAmplifierOperStatus
The operational state of the interface. notPresent - The interface is not available. down - The interface is de-activated or there are faults prevent…
columnLUM-TCOperStatusWithNA.1.3.6.1.4.1.8708.2.65.2.2.1.1.9