Juniper-PPPOE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
56

juniPPPoEIfTable

table
.1.3.6.1.4.1.4874.2.2.18.1.1.2 · 1 row entry · 14 columns
Open in standard view 
The parameters for the PPPoE service on this interface.
juniPPPoEIfEntry entry .1.3.6.1.4.1.4874.2.2.18.1.1.2.1
The Parameters for a particular PPPoE interface.

Creating/deleting entries in this table causes corresponding entries for
be created/deleted in ifTable/ifXTable/juniIfTable, and
juniPPPoEIfStatsTable.
Indexes
juniPPPoEIfIfIndex
Column Syntax OID
juniPPPoEIfIfIndex
The ifIndex value of the corresponding ifEntry.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.1
juniPPPoEIfMaxNumSessions
The number of sessions allowed on the PPPoE interface, zero indicates
unlimited.
Integer32r/w
Constraints:
range: 0-65335
 .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.2
juniPPPoEIfRowStatus
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy

To create an entry in this …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.3
juniPPPoEIfLowerIfIndex
The ifIndex of an interface over which this PPPoE interface is to be
layered. A value of zero indicates no layering. An implementation may
choose to require that a nonzero value be configured at entry creation.
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.4
juniPPPoEIfAcName
The name to use for the AC-NAME tag that is sent in any PADO that is
sent on this interface.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.5
juniPPPoEIfDupProtect
Flag to allow duplicate MAC addresses.
Juniper-TCJuniEnabler/w
Textual Convention: Juniper-TCJuniEnable Enumeration
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.6
juniPPPoEIfPADIFlag
This flag controls whether we always respond to a PADI with a PADO
regardless of the ability to create the session and allows the session
establish phase to resolve it.
Juniper-TCJuniEnabler/w
Textual Convention: Juniper-TCJuniEnable Enumeration
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.7
juniPPPoEIfAutoconfig
This flags determines whether the upper PPPoE interface is created
dynamically or statically. When enable(1) the interface is created
dynamically.
Juniper-TCJuniEnabler/w
Textual Convention: Juniper-TCJuniEnable Enumeration
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.8
juniPPPoEIfServiceNameTable
Associate a PPPoE Service Name Table with this interface for PADI
processing.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.9
juniPPPoEIfPadrRemoteCircuitIdCapture
This flags determines whether the remote circuit id string will
be captured and subsequently used as the NAS-PORT-ID radius
attribute when it arrives as a tag in the PADR packet.
Juniper-TCJuniEnabler/w
Textual Convention: Juniper-TCJuniEnable Enumeration
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.10
juniPPPoEIfMtu
The initial Maximum Transmit Unit (MTU) that the PPPoE major interface
entity will advertise to the remote entity.

If the value of this variable is 1 then the local PPPoE entity will
use an MTU value dete…
Integer32r/w
Constraints:
range: 66-65535
range: 1-2
 .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.11
juniPPPoEIfLockoutMin
The lower bound, in seconds, of the time range used to specify
the duration of the lockout of the client from recognition for
the specified interface. This only takes effect if
juniPPPoEIfAutoconfig is set for this in…
Integer32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.12
juniPPPoEIfLockoutMax
The upper bound, in seconds, of the time range used to specify
the duration of the lockout of the client from recognition for
the specified interface. This only takes effect if
juniPPPoEIfAutoconfig is set for this in…
Integer32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.13
juniPPPoEMaxSessionVsa
Configure the action to be taken by PPPoE when RADIUS server returns
the PPPoE max-session value:
override Override the current PPPoE max-session value with the value
returned by RADIUS server.
Ignore …
Enumerationr/w
Enumerated Values:
1override
2ignore
 .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.14

juniPPPoEIfStatsTable

table
.1.3.6.1.4.1.4874.2.2.18.1.1.3 · 1 row entry · 19 columns
Open in standard view 
The statistics for the PPP over Ethernet Interface for the PPPoE
service on this interface.
juniPPPoEIfStatsEntry entry .1.3.6.1.4.1.4874.2.2.18.1.1.3.1
The statistics for a particular PPPoE Interface.
Indexes
juniPPPoEIfIfIndex
Column Syntax OID
juniPPPoEIfStatsRxPADI
Number of PADI packets received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.18.1.1.3.1.1
juniPPPoEIfStatsTxPADO
Number of PADO packets transmitted.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.18.1.1.3.1.2
juniPPPoEIfStatsRxPADR
Number of PADR packets received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.18.1.1.3.1.3
juniPPPoEIfStatsTxPADS
Number of PADS packets transmitted.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.18.1.1.3.1.4
juniPPPoEIfStatsRxPADT
Number of PADT packets received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.18.1.1.3.1.5
juniPPPoEIfStatsTxPADT
Number of PADT packets transmitted.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.18.1.1.3.1.6
juniPPPoEIfStatsRxInvVersion
Number of packets received with invalid version.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.18.1.1.3.1.7
juniPPPoEIfStatsRxInvCode
Number of packets received with invalid code.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.18.1.1.3.1.8
juniPPPoEIfStatsRxInvTags
Number of packets received with invalid tags.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.18.1.1.3.1.9
juniPPPoEIfStatsRxInvSession obsolete
Number of packets received with invalid session identifiers.

This object became obsolete when separate counters were added for PADI
and PADR packets.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.18.1.1.3.1.10
juniPPPoEIfStatsRxInvTypes
Number of packets received with invalid types.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.18.1.1.3.1.11
juniPPPoEIfStatsRxInvPackets
Number of invalid packets received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.18.1.1.3.1.12
juniPPPoEIfStatsRxInsufficientResources
Number of session requests that could not be honored due to invalid
resources.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.18.1.1.3.1.13
juniPPPoEIfStatsTxPADM
Number of PADM packets transmitted.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.18.1.1.3.1.14
juniPPPoEIfStatsTxPADN
Number of PADN packets transmitted.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.18.1.1.3.1.15
juniPPPoEIfStatsRxInvTagLength
Number of packets received with invalid tag length.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.18.1.1.3.1.16
juniPPPoEIfStatsRxInvLength
Number of packets received with invalid length.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.18.1.1.3.1.17
juniPPPoEIfStatsRxInvPadISession
Number of PADI packets received with invalid session identifiers.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.18.1.1.3.1.18
juniPPPoEIfStatsRxInvPadRSession
Number of PADR packets received with invalid session identifiers.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.18.1.1.3.1.19

juniPPPoEIfLockoutTable

table
.1.3.6.1.4.1.4874.2.2.18.1.1.4 · 1 row entry · 4 columns
Open in standard view 
The lockout configuration and state of a PPPoE client on this interface.
juniPPPoEIfLockoutEntry entry .1.3.6.1.4.1.4874.2.2.18.1.1.4.1
Each entry contains the configuration and state of a particular
PPPoE interface client lockout.
Indexes
juniPPPoEIfIfIndex juniPPPoEIfLockoutClientAddress
Column Syntax OID
juniPPPoEIfLockoutClientAddress
The source MAC address if the client.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.4874.2.2.18.1.1.4.1.1
juniPPPoEIfLockoutTime
The time duration, in seconds, currently used to lockout the
specified encapsulation type from recognition for the specified
interface. The reported value is within the range specified by
juniPPPoEIfLockoutMin and juni…
Integer32
Constraints:
range: 0-86400
 .1.3.6.1.4.1.4874.2.2.18.1.1.4.1.2
juniPPPoEIfLockoutElapsedTime
The elapsed time, in seconds, that the specified encapsulation type
has been locked-out from recognition for the specified interface.
Its value will not exceed that of juniPPPoEIfLockoutTime. A value of
0 indicates t…
Integer32
Constraints:
range: 0-86400
 .1.3.6.1.4.1.4874.2.2.18.1.1.4.1.3
juniPPPoEIfLockoutNextTime
The time duration, in seconds, that will be used to lockout the
specified encapsulation type from recognition for the specified
interface for the next event that results in a lockout condition.
The reported value is wi…
Integer32
Constraints:
range: 0-86400
 .1.3.6.1.4.1.4874.2.2.18.1.1.4.1.4

juniPPPoESubIfTable

table
.1.3.6.1.4.1.4874.2.2.18.1.2.2 · 1 row entry · 7 columns
Open in standard view 
This table contains entries for PPPoE Subinterfaces present in the
system.
juniPPPoESubIfEntry entry .1.3.6.1.4.1.4874.2.2.18.1.2.2.1
Each entry describes the characteristics of a PPPoE Subinterface.
Creating/deleting entries in this table causes corresponding entries for
be created /deleted in ifTable/ifXTable/juniIfTable.
Indexes
juniPPPoESubIfIndex
Column Syntax OID
juniPPPoESubIfIndex
The ifIndex of the PPPoE Subinterface. When creating entries in this
table, suitable values for this object are determined by reading
juniPPPoESubNextIfIndex.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4874.2.2.18.1.2.2.1.1
juniPPPoESubIfRowStatus
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy

To create an entry in this …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.18.1.2.2.1.2
juniPPPoESubIfLowerIfIndex
The ifIndex of a PPPoE interface over which this PPPoE Subinterface is
to be layered. A value of zero indicates no layering. An
implementation may choose to require that a nonzero value be configured
at entry creation.
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.4874.2.2.18.1.2.2.1.3
juniPPPoESubIfId
An integer identifier for the PPPoE subinterface, used in conjunction
with the command-line interface. It is provided here for
cross-reference purposes only.

The value must be unique among subinterfaces …
Integer32r/w
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.4874.2.2.18.1.2.2.1.4
juniPPPoESubIfSessionId
The current sessionId associated with this sub-interface.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.4874.2.2.18.1.2.2.1.5
juniPPPoESubIfMotm
A message to send via a PADM on the sub-interface when the
sub-interface transitions to the ifOperStatusUp state. The client may
choose to display this message to the user.
OctetStringr/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.4874.2.2.18.1.2.2.1.6
juniPPPoESubIfUrl
A URL to be sent via a PADM on the sub-interface when the sub-interface
transitions to the ifOperStatusUp state. The client may use this URL as
the initial web-page for the user.
OctetStringr/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.4874.2.2.18.1.2.2.1.7

juniPPPoEProfileTable

table deprecated
.1.3.6.1.4.1.4874.2.2.18.1.4.1 · 1 row entry · 4 columns
Open in standard view 
This table contains entries for the PPPoE portion of a profile entry.
juniPPPoEProfileEntry entry .1.3.6.1.4.1.4874.2.2.18.1.4.1.1
Each entry describes the characteristics of the PPPoE components of a
profile entry. Each entry is applied to an interface when the IP
interface above the PPPoE sub-interface becomes active.
Indexes
juniPPPoEProfileIndex
Column Syntax OID
juniPPPoEProfileIndex deprecated
This is the index of the profile that the attributes are being set in.
The index must exist before creating a row in this table. The index is
equivalent to juniProfileIdId in the juniProfileIdTable.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.18.1.4.1.1.1
juniPPPoEProfileRowStatus deprecated
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy

The index must exist in the…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.18.1.4.1.1.2
juniPPPoEProfileMotm deprecated
A message to send via a PADM on the sub-interface when this profile is
applied to the IP interface above this PPPoE sub-interface. A client
may choose to display this message to the user.
OctetStringr/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.4874.2.2.18.1.4.1.1.3
juniPPPoEProfileUrl deprecated
A URL to be sent via a PADM on the sub-interface when this profile is
applied to the IP interface above this PPPoE sub-interface. The string
entered here can have several substitutions applied:
%D is replaced…
OctetStringr/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.4874.2.2.18.1.4.1.1.4

juniPPPoEServiceNameTableTable

table
.1.3.6.1.4.1.4874.2.2.18.1.6.2 · 1 row entry · 5 columns
Open in standard view 
This table contains entries for the PPPoE Service-name tables.
juniPPPoEServiceNameTableEntry entry .1.3.6.1.4.1.4874.2.2.18.1.6.2.1
The parameters for the PPPoE service-name table.
Indexes
juniPPPoEServiceNameTableIndex
Column Syntax OID
juniPPPoEServiceNameTableIndex
The index value of the Service-name Table Entry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.18.1.6.2.1.1
juniPPPoEServiceNameTableName
Service-name table name.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.4874.2.2.18.1.6.2.1.2
juniPPPoEServiceNameTableEmptyAction
Identifies the behavior when the empty (zero length) Service-name tag
is received in a PADI frame.
JuniPPPoEServiceNameActionr/w
Textual Convention: JuniPPPoEServiceNameAction Enumeration
Type Values:
0drop
1terminate
 .1.3.6.1.4.1.4874.2.2.18.1.6.2.1.3
juniPPPoEServiceNameTableRowStatus
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy

To create an entry in this …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.18.1.6.2.1.4
juniPPPoEServiceNameTableUnknownAction
Identifies the behavior when the unknown (unconfigured) Service-name tag
is received in a PADI frame.
JuniPPPoEServiceNameActionr/w
Textual Convention: JuniPPPoEServiceNameAction Enumeration
Type Values:
0drop
1terminate
 .1.3.6.1.4.1.4874.2.2.18.1.6.2.1.5

juniPPPoEServiceNameTable

table
.1.3.6.1.4.1.4874.2.2.18.1.6.3 · 1 row entry · 3 columns
Open in standard view 
This table contains entries for the PPPoE Service-names.
juniPPPoEServiceNameEntry entry .1.3.6.1.4.1.4874.2.2.18.1.6.3.1
The parameters for the PPPoE service-name table entry.
Indexes
juniPPPoEServiceNameTableIndex juniPPPoEServiceName
Column Syntax OID
juniPPPoEServiceName
Service-name tag value.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.4874.2.2.18.1.6.3.1.1
juniPPPoEServiceNameAction
Identifies the behavior when the Service-name tag is received in a
PADI/PADR frame.
JuniPPPoEServiceNameActionr/w
Textual Convention: JuniPPPoEServiceNameAction Enumeration
Type Values:
0drop
1terminate
 .1.3.6.1.4.1.4874.2.2.18.1.6.3.1.2
juniPPPoEServiceNameRowStatus
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy

To create an entry in this …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.18.1.6.3.1.3