juniPPPoEIfLowerIfIndex
Juniper-PPPOE-MIB ·
.1.3.6.1.4.1.4874.2.2.18.1.1.2.1.4
Object
The ifIndex of an interface over which this PPPoE interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation.
Context
- MIB
- Juniper-PPPOE-MIB
- OID
.1.3.6.1.4.1.4874.2.2.18.1.1.2.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- juniPPPoEIfEntry
- Table
- juniPPPoEIfTable
- Siblings
- 13
Values & Constraints
Type Constraints
range: 0..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniPPPoEIfIfIndex The ifIndex value of the corresponding ifEntry. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.1 |
| juniPPPoEIfPadrRemoteCircuitIdCapture This flags determines whether the remote circuit id string will
be captured and subsequently used as the NAS-PORT-ID radius
attribute when it arrives as a tag in the PADR packet. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.10 |
| juniPPPoEIfMtu The initial Maximum Transmit Unit (MTU) that the PPPoE major interface
entity will advertise to the remote entity.
If the value of this variable is 1 then the local… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.11 |
| juniPPPoEIfLockoutMin The lower bound, in seconds, of the time range used to specify
the duration of the lockout of the client from recognition for
the specified interface. This only takes effect if
… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.12 |
| juniPPPoEIfLockoutMax The upper bound, in seconds, of the time range used to specify
the duration of the lockout of the client from recognition for
the specified interface. This only takes effect if
… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.13 |
| juniPPPoEMaxSessionVsa Configure the action to be taken by PPPoE when RADIUS server returns
the PPPoE max-session value:
override Override the current PPPoE max-session value with the value
… | column | Enumeration | .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.14 |
| juniPPPoEIfMaxNumSessions The number of sessions allowed on the PPPoE interface, zero indicates
unlimited. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.2 |
| juniPPPoEIfRowStatus Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.3 |
| juniPPPoEIfAcName The name to use for the AC-NAME tag that is sent in any PADO that is
sent on this interface. | column | OctetString | .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.5 |
| juniPPPoEIfDupProtect Flag to allow duplicate MAC addresses. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.6 |
| juniPPPoEIfPADIFlag This flag controls whether we always respond to a PADI with a PADO
regardless of the ability to create the session and allows the session
establish phase to resolve it. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.7 |
| juniPPPoEIfAutoconfig This flags determines whether the upper PPPoE interface is created
dynamically or statically. When enable(1) the interface is created
dynamically. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.8 |
| juniPPPoEIfServiceNameTable Associate a PPPoE Service Name Table with this interface for PADI
processing. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.9 |