juniPPPoEIfLockoutMin
Juniper-PPPOE-MIB ·
.1.3.6.1.4.1.4874.2.2.18.1.1.2.1.12
Object
column
r/w
Integer32
The lower bound, in seconds, of the time range used to specify
the duration of the lockout of the client from recognition for
the specified interface. This only takes effect if
juniPPPoEIfAutoconfig is set for this interface.
The ability to lockout the client in the event of an error in
creating a PPP interface is enabled by default. The initial lockout
duration is this object's value and increases exponentially for
each failure that occurs for the client creating a PPP interface
for the PPPoE interface within the greater of 15 minutes
and juniPPPoEIfLockoutMax.
The lockout duration for the client will not exceed juniPPPoEIfLockoutMax.
If the time between creation errors for the PPP interface for this
interface is greater than the greater of 15 minutes and
juniPPPoEIfLockoutMax, then the lockout duration reverts to this
object's value.
To disable the ability to lockout the client from recognition in the
event of an error in creating a PPP interface for the specified interface,
the value of this object and juniPPPoEIfLockoutMin must be set to 0.
It is not recommended that this lockout feature be disabled except for
debugging purposes or when this interface supports more than one session.
Context
- MIB
- Juniper-PPPOE-MIB
- OID
.1.3.6.1.4.1.4874.2.2.18.1.1.2.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- juniPPPoEIfEntry
- Table
- juniPPPoEIfTable
- Siblings
- 13
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-86400
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniPPPoEIfIfIndex The ifIndex value of the corresponding ifEntry. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.1 |
| juniPPPoEIfPadrRemoteCircuitIdCapture This flags determines whether the remote circuit id string will
be captured and subsequently used as the NAS-PORT-ID radius
attribute when it arrives as a tag in the PADR packet. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.10 |
| juniPPPoEIfMtu The initial Maximum Transmit Unit (MTU) that the PPPoE major interface
entity will advertise to the remote entity.
If the value of this variable is 1 then the local… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.11 |
| juniPPPoEIfLockoutMax The upper bound, in seconds, of the time range used to specify
the duration of the lockout of the client from recognition for
the specified interface. This only takes effect if
… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.13 |
| juniPPPoEMaxSessionVsa Configure the action to be taken by PPPoE when RADIUS server returns
the PPPoE max-session value:
override Override the current PPPoE max-session value with the value
… | column | Enumeration | .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.14 |
| juniPPPoEIfMaxNumSessions The number of sessions allowed on the PPPoE interface, zero indicates
unlimited. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.2 |
| juniPPPoEIfRowStatus Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.3 |
| juniPPPoEIfLowerIfIndex The ifIndex of an interface over which this PPPoE interface is to be
layered. A value of zero indicates no layering. An implementation may
choose to require that a nonzero value… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.4 |
| juniPPPoEIfAcName The name to use for the AC-NAME tag that is sent in any PADO that is
sent on this interface. | column | OctetString | .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.5 |
| juniPPPoEIfDupProtect Flag to allow duplicate MAC addresses. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.6 |
| juniPPPoEIfPADIFlag This flag controls whether we always respond to a PADI with a PADO
regardless of the ability to create the session and allows the session
establish phase to resolve it. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.7 |
| juniPPPoEIfAutoconfig This flags determines whether the upper PPPoE interface is created
dynamically or statically. When enable(1) the interface is created
dynamically. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.8 |
| juniPPPoEIfServiceNameTable Associate a PPPoE Service Name Table with this interface for PADI
processing. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.9 |