juniPPPoEIfLockoutMax

Juniper-PPPOE-MIB · .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.13
MIB view Table view

Object

column r/w Integer32 
The upper bound, in seconds, of the time range used to specify 
the duration of the lockout of the client from recognition for
the specified interface.  This only takes effect if
juniPPPoEIfAutoconfig is set for this interface.
              
The ability to lockout the client from recognition in the event
of an error in creating a PPP interface is enabled by default.
The initial lockout duration is juniPPPoEIfLockoutMin and
increases exponentially for each failure that occurs for the client
interface within the greater of 15 minutes and this object's value.
              
The lockout duration for the client will not exceed juniPPPoEIfLockoutMax.
If the time between creation errors for the PPP interface for this
interface is greater than the greater of 15 minutes and
juniPPPoEIfLockoutMax, then the lockout duration reverts to
juniPPPoEIfLockoutMin.
              
To disable the ability to lockout the client from recognition in the
event of an error in creating a PPP interface for the specified interface,
the value of this object and juniPPPoEIfLockoutMin must be set to 0.
It is not recommended that this lockout feature be disabled except for 
debugging purposes or when this interface supports more than one session.

Context

MIB
Juniper-PPPOE-MIB
OID
.1.3.6.1.4.1.4874.2.2.18.1.1.2.1.13
Type
column
Access
readwrite
Status
current
Parent
juniPPPoEIfEntry
Table
juniPPPoEIfTable
Siblings
13

Syntax

Integer32

Values & Constraints

Object Constraints
range: 0-86400

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
juniPPPoEIfIfIndex
The ifIndex value of the corresponding ifEntry.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.4874.2.2.18.1.1.2.1.1
juniPPPoEIfPadrRemoteCircuitIdCapture
This flags determines whether the remote circuit id string will be captured and subsequently used as the NAS-PORT-ID radius attribute when it arrives as a tag in the PADR packet.
columnJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.18.1.1.2.1.10
juniPPPoEIfMtu
The initial Maximum Transmit Unit (MTU) that the PPPoE major interface entity will advertise to the remote entity. If the value of this variable is 1 then the local…
columnInteger32.1.3.6.1.4.1.4874.2.2.18.1.1.2.1.11
juniPPPoEIfLockoutMin
The lower bound, in seconds, of the time range used to specify the duration of the lockout of the client from recognition for the specified interface. This only takes effect if …
columnInteger32.1.3.6.1.4.1.4874.2.2.18.1.1.2.1.12
juniPPPoEMaxSessionVsa
Configure the action to be taken by PPPoE when RADIUS server returns the PPPoE max-session value: override Override the current PPPoE max-session value with the value …
columnEnumeration.1.3.6.1.4.1.4874.2.2.18.1.1.2.1.14
juniPPPoEIfMaxNumSessions
The number of sessions allowed on the PPPoE interface, zero indicates unlimited.
columnInteger32.1.3.6.1.4.1.4874.2.2.18.1.1.2.1.2
juniPPPoEIfRowStatus
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy …
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.4874.2.2.18.1.1.2.1.3
juniPPPoEIfLowerIfIndex
The ifIndex of an interface over which this PPPoE interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value…
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.4874.2.2.18.1.1.2.1.4
juniPPPoEIfAcName
The name to use for the AC-NAME tag that is sent in any PADO that is sent on this interface.
columnOctetString.1.3.6.1.4.1.4874.2.2.18.1.1.2.1.5
juniPPPoEIfDupProtect
Flag to allow duplicate MAC addresses.
columnJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.18.1.1.2.1.6
juniPPPoEIfPADIFlag
This flag controls whether we always respond to a PADI with a PADO regardless of the ability to create the session and allows the session establish phase to resolve it.
columnJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.18.1.1.2.1.7
juniPPPoEIfAutoconfig
This flags determines whether the upper PPPoE interface is created dynamically or statically. When enable(1) the interface is created dynamically.
columnJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.18.1.1.2.1.8
juniPPPoEIfServiceNameTable
Associate a PPPoE Service Name Table with this interface for PADI processing.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.4874.2.2.18.1.1.2.1.9