Juniper-ETHERNET-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
28

juniEthernetIfTable

table
.1.3.6.1.4.1.4874.2.2.34.1.1.1 · 1 row entry · 9 columns
Open in standard view 
The parameters for the Ethernet interface.
juniEthernetIfEntry entry .1.3.6.1.4.1.4874.2.2.34.1.1.1.1
The Parameters for a particular Ethernet interface. Entries in this
table correspond with entries in the ifTable/ifXTable/juniIfTable.
Indexes
juniEthernetIfIndex
Column Syntax OID
juniEthernetIfIndex
The ifIndex value of the corresponding ethernet interface.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4874.2.2.34.1.1.1.1.1
juniEthernetIfDuplexMode
The configured duplex setting for this ethernet interface. The
operational value is reported in this table entry's corresponding
juniEthernetIfOperDuplexMode object.

NOTE, configuration dependency:
…
Enumerationr/w
Enumerated Values:
1autoDuplex
2halfDuplex
3fullDuplex
 .1.3.6.1.4.1.4874.2.2.34.1.1.1.1.2
juniEthernetIfSpeed
The configured speed setting for this ethernet interface. The
operational value is reported in the corresponding Interfaces MIB
ifSpeed object.

NOTE, configuration dependency:

Setting this…
Enumerationr/w
Enumerated Values:
1autoNegotiate
2speed10Mbps
3speed100Mbps
4speed1000Mbps
5speed10000Mbps
 .1.3.6.1.4.1.4874.2.2.34.1.1.1.1.3
juniEthernetIfMtu
The configured maximum transfer unit (MTU) for this ethernet interface.
The operational value is reported in the corresponding Interfaces MIB
ifMtu object.
Integer32r/w
Constraints:
range: 64-9188
 .1.3.6.1.4.1.4874.2.2.34.1.1.1.1.4
juniEthernetIfOperDuplexMode
The current operational duplex mode for this ethernet interface.
Enumeration
Enumerated Values:
1autoDuplex
2halfDuplex
3fullDuplex
 .1.3.6.1.4.1.4874.2.2.34.1.1.1.1.5
juniEthernetIfPrimaryMauType
The primary MAU type.
JuniEthernetIfMauType
Textual Convention: JuniEthernetIfMauType Enumeration
Type Values:
0mauNotPresent
1mauNotSupported
2mau10BaseT
3mau100BaseTx
4mau1000BaseT
5mau1000BaseCx
6mau1000BaseSx
7mau1000BaseLx
8mau1000BaseZx
9mauSfpUnknown
10mauSfpNotPresent
11mau100BaseFxSm
12mau100BaseFxMm
13mauSfpNotJnprCompliant
14mau10000BaseSr
15mau10000BaseLr
16mau10000BaseEr
17mauXfpUnknown
18mauXfpNotPresent
19mauXfpNotJnprCompliant
 .1.3.6.1.4.1.4874.2.2.34.1.1.1.1.6
juniEthernetIfSecondaryMauType
The secondary MAU type for those ports that support a secondary.
JuniEthernetIfMauType
Textual Convention: JuniEthernetIfMauType Enumeration
Type Values:
0mauNotPresent
1mauNotSupported
2mau10BaseT
3mau100BaseTx
4mau1000BaseT
5mau1000BaseCx
6mau1000BaseSx
7mau1000BaseLx
8mau1000BaseZx
9mauSfpUnknown
10mauSfpNotPresent
11mau100BaseFxSm
12mau100BaseFxMm
13mauSfpNotJnprCompliant
14mau10000BaseSr
15mau10000BaseLr
16mau10000BaseEr
17mauXfpUnknown
18mauXfpNotPresent
19mauXfpNotJnprCompliant
 .1.3.6.1.4.1.4874.2.2.34.1.1.1.1.7
juniEthernetIfPrimaryLength
The rated cable length in meters for the primary MAU. If the value is
0, the length is unspecified.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.4874.2.2.34.1.1.1.1.8
juniEthernetIfSecondaryLength
The rated cable length in meters for the secondary MAU for those ports
that support a secondary. If the value is 0, the length is
unspecified.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.4874.2.2.34.1.1.1.1.9

juniEthernetSubIfTable

table
.1.3.6.1.4.1.4874.2.2.34.1.2.2 · 1 row entry · 4 columns
Open in standard view 
This table contains entries for Ethernet Subinterfaces present in the
system.
juniEthernetSubIfEntry entry .1.3.6.1.4.1.4874.2.2.34.1.2.2.1
Each entry describes the characteristics of an Ethernet Subinterface.
Creating/deleting entries in this table causes corresponding entries for
be created/deleted in ifTable/ifXTable/juniIfTable.
Indexes
juniEthernetSubIfIndex
Column Syntax OID
juniEthernetSubIfIndex
The ifIndex of the Ethernet Subinterface. When creating entries in
this table, suitable values for this object are determined by reading
juniEthernetSubNextIfIndex.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4874.2.2.34.1.2.2.1.1
juniEthernetSubIfRowStatus
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy

To create an entry in this …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.34.1.2.2.1.2
juniEthernetSubIfLowerIfIndex
The ifIndex of a Ethernet interface over which this Ethernet
Subinterface is to be layered. A value of zero indicates no layering.
An implementation may choose to require that a nonzero value be
configured at entry cre…
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.4874.2.2.34.1.2.2.1.3
juniEthernetSubIfId
An integer identifier for the Ethernet subinterface, used in
conjunction with the command-line interface. It is provided here for
cross-reference purposes only.

The value must be unique among subinterfac…
Integer32r/w
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.4874.2.2.34.1.2.2.1.4

juniVlanMajorIfTable

table
.1.3.6.1.4.1.4874.2.2.34.1.3.2 · 1 row entry · 3 columns
Open in standard view 
This table contains entries for major VLAN interfaces present in the
system.
juniVlanMajorIfEntry entry .1.3.6.1.4.1.4874.2.2.34.1.3.2.1
Each entry describes the characteristics of a major VLAN interface.
Creating/deleting entries in this table causes corresponding entries for
be created/deleted in ifTable/ifXTable/juniIfTable.
Indexes
juniVlanMajorIfIndex
Column Syntax OID
juniVlanMajorIfIndex
The ifIndex of the major VLAN interface. When creating entries in this
table, suitable values for this object are determined by reading
juniVlanMajorNextIfIndex.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4874.2.2.34.1.3.2.1.1
juniVlanMajorIfLowerIfIndex
The ifIndex of the interface over which this major VLAN interface is to
be layered. A value of zero indicates no layering. An implementation
may choose to require that a nonzero value be configured at entry
creation.
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.4874.2.2.34.1.3.2.1.2
juniVlanMajorIfRowStatus
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy

To create or delete an entr…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.34.1.3.2.1.3

juniVlanSubIfTable

table
.1.3.6.1.4.1.4874.2.2.34.1.4.2 · 1 row entry · 9 columns
Open in standard view 
This table contains entries for VLAN Subinterfaces present in the
system.
juniVlanSubIfEntry entry .1.3.6.1.4.1.4874.2.2.34.1.4.2.1
Each entry describes the characteristics of a VLAN Subinterface.
Creating/deleting entries in this table causes corresponding entries for
be created/deleted in ifTable/ifXTable/juniIfTable.
Indexes
juniVlanSubIfIndex
Column Syntax OID
juniVlanSubIfIndex
The ifIndex of the VLAN Subinterface. When creating entries in this
table, suitable values for this object are determined by reading
juniVlanSubNextIfIndex.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4874.2.2.34.1.4.2.1.1
juniVlanSubIfVlanId
An integer identifier or tag ID for this VLAN A value of zero indicates
the default VLAN.

When VLANs are enabled, the value must be unique among subinterfaces
configured on the same underlying major VLAN …
Integer32r/w
Constraints:
range: 0-4095
range: 5000-5001
 .1.3.6.1.4.1.4874.2.2.34.1.4.2.1.2
juniVlanSubIfVlanUntagged
When VLANs are enabled, this allows tagged frames to be received, while
transmitted frames remain untagged. This can only be enabled when the
juniVlanSubIfVlanId field is zero.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4874.2.2.34.1.4.2.1.3
juniVlanSubIfLowerIfIndex
The ifIndex of VLAN major interface over which this VLAN Subinterface
is to be layered. A value of zero indicates no layering. An
implementation may choose to require that a nonzero value be configured
at entry creati…
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.4874.2.2.34.1.4.2.1.4
juniVlanSubIfRowStatus
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy

To create an entry in this …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.34.1.4.2.1.5
juniVlanSubIfVlanStackId
An integer identifier or tag ID for this S-VLAN.

When S-VLANs are enabled, the VLAN and S-VLAN ID valuse must be unique
among subinterfaces configured on the same underlying major VLAN
interface.
…
Integer32r/w
Constraints:
range: 0-4095
range: 5000-5000
 .1.3.6.1.4.1.4874.2.2.34.1.4.2.1.6
juniVlanSubIfVlanStackEthertype
The ethertype is used to recognize and demultiplex traffic for this
S-VLAN. Must be either 0x8100, 0x88a8, or 0x9100.
Enumerationr/w
Enumerated Values:
33024etherType8100h
34984etherType88a8h
37120etherType9100h
 .1.3.6.1.4.1.4874.2.2.34.1.4.2.1.7
juniVlanSubIfVlanAdvisoryRxSpeed
Advisory receive speed, in kilobits per second (kbps),
of this subinterface. This object has no impact on
forwarding performance but may be used as a hint for
underlying circuit receive speed.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.34.1.4.2.1.8
juniVlanSubIfVlanAdvisoryTxSpeed
Advisory transmit speed, in kilobits per second (kbps),
of this subinterface. This object has no impact on
forwarding performance but may be used as a hint for
underlying circuit transmit speed.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.34.1.4.2.1.9

juniEthernetIfStatsTable

table
.1.3.6.1.4.1.4874.2.2.34.1.5.1 · 1 row entry · 3 columns
Open in standard view 
The parameters for the Ethernet interface statistics.
juniEthernetIfStatsEntry entry .1.3.6.1.4.1.4874.2.2.34.1.5.1.1
The Parameters for a particular Ethernet interface statistics.
Indexes
juniEthernetIfStatsIndex
Column Syntax OID
juniEthernetIfStatsIndex
The ifIndex value of the corresponding ethernet interface.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4874.2.2.34.1.5.1.1.1
juniEthernetIfIngressLineUtilization
The ingress line utilization statistic for this ethernet interface.
percentUnsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.4874.2.2.34.1.5.1.1.2
juniEthernetIfEgressLineUtilization
The egress line utilization statistic for this ethernet interface.
percentUnsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.4874.2.2.34.1.5.1.1.3