juniVlanSubIfVlanId
Juniper-ETHERNET-MIB ·
.1.3.6.1.4.1.4874.2.2.34.1.4.2.1.2
Object
column
r/w
Integer32
An integer identifier or tag ID for this VLAN A value of zero indicates
the default VLAN.
When VLANs are enabled, the value must be unique among subinterfaces
configured on the same underlying major VLAN interface.
If the VLAN ID is non-zero, then the juniVlanSubIfVlanUntagged field
must be disabled.
The VLAN ID default value of 5000 indicates that the VLAN Subinterface
has been created but the VLAN ID has yet to be assigned.
The VLAN ID value of 5001 indicates that this VLAN Subinterface is of
type S-VLAN any. The juniVlanSubIfVlanStackId object should be set to a
non-default value (i.e. this VLAN Subinterface should be a S-VLAN).
Context
- MIB
- Juniper-ETHERNET-MIB
- OID
.1.3.6.1.4.1.4874.2.2.34.1.4.2.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- juniVlanSubIfEntry
- Table
- juniVlanSubIfTable
- Siblings
- 8
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-4095
range: 5000-5001
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniVlanSubIfIndex The ifIndex of the VLAN Subinterface. When creating entries in this
table, suitable values for this object are determined by reading
juniVlanSubNextIfIndex. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.4874.2.2.34.1.4.2.1.1 |
| juniVlanSubIfVlanUntagged When VLANs are enabled, this allows tagged frames to be received, while
transmitted frames remain untagged. This can only be enabled when the
juniVlanSubIfVlanId field is zero. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.34.1.4.2.1.3 |
| juniVlanSubIfLowerIfIndex The ifIndex of VLAN major interface over which this VLAN Subinterface
is to be layered. A value of zero indicates no layering. An
implementation may choose to require that a non… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.4874.2.2.34.1.4.2.1.4 |
| juniVlanSubIfRowStatus Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.4874.2.2.34.1.4.2.1.5 |
| juniVlanSubIfVlanStackId An integer identifier or tag ID for this S-VLAN.
When S-VLANs are enabled, the VLAN and S-VLAN ID valuse must be unique
among subinterfaces configured on the same u… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.34.1.4.2.1.6 |
| juniVlanSubIfVlanStackEthertype The ethertype is used to recognize and demultiplex traffic for this
S-VLAN. Must be either 0x8100, 0x88a8, or 0x9100. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.34.1.4.2.1.7 |
| juniVlanSubIfVlanAdvisoryRxSpeed Advisory receive speed, in kilobits per second (kbps),
of this subinterface. This object has no impact on
forwarding performance but may be used as a hint for
underlying circuit r… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.34.1.4.2.1.8 |
| juniVlanSubIfVlanAdvisoryTxSpeed Advisory transmit speed, in kilobits per second (kbps),
of this subinterface. This object has no impact on
forwarding performance but may be used as a hint for
underlying circuit … | column | Integer32 | .1.3.6.1.4.1.4874.2.2.34.1.4.2.1.9 |