juniVlanSubIfRowStatus
Juniper-ETHERNET-MIB ·
.1.3.6.1.4.1.4874.2.2.34.1.4.2.1.5
Object
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniVlanSubIfRowStatus
juniVlanSubIfLowerIfIndex
juniVlanSubIfVlanId
juniVlanSubIfVlanUntagged
To delete an entry in this table, the following entry objects MUST be
explicitly configured:
juniVlanSubIfRowStatus
juniVlanSubIfLowerIfIndex
In addition, when creating an entry the following conditions must hold:
A value for juniVlanSubIfIndex must have been determined previously
by reading juniVlanSubIfNextIfIndex.
The interface identified by juniVlanSubIfLowerIfIndex must exist,
and must be a Ethernet interface.
A corresponding entry in ifTable/ifXTable/juniIfTable is
created/destroyed as a result of creating/destroying an entry in this
table.
Context
- MIB
- Juniper-ETHERNET-MIB
- OID
.1.3.6.1.4.1.4874.2.2.34.1.4.2.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- juniVlanSubIfEntry
- Table
- juniVlanSubIfTable
- Siblings
- 8
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniVlanSubIfIndex The ifIndex of the VLAN Subinterface. When creating entries in this
table, suitable values for this object are determined by reading
juniVlanSubNextIfIndex. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.4874.2.2.34.1.4.2.1.1 |
| juniVlanSubIfVlanId An integer identifier or tag ID for this VLAN A value of zero indicates
the default VLAN.
When VLANs are enabled, the value must be unique among subinterfaces
confi… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.34.1.4.2.1.2 |
| juniVlanSubIfVlanUntagged When VLANs are enabled, this allows tagged frames to be received, while
transmitted frames remain untagged. This can only be enabled when the
juniVlanSubIfVlanId field is zero. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.34.1.4.2.1.3 |
| juniVlanSubIfLowerIfIndex The ifIndex of VLAN major interface over which this VLAN Subinterface
is to be layered. A value of zero indicates no layering. An
implementation may choose to require that a non… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.4874.2.2.34.1.4.2.1.4 |
| juniVlanSubIfVlanStackId An integer identifier or tag ID for this S-VLAN.
When S-VLANs are enabled, the VLAN and S-VLAN ID valuse must be unique
among subinterfaces configured on the same u… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.34.1.4.2.1.6 |
| juniVlanSubIfVlanStackEthertype The ethertype is used to recognize and demultiplex traffic for this
S-VLAN. Must be either 0x8100, 0x88a8, or 0x9100. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.34.1.4.2.1.7 |
| juniVlanSubIfVlanAdvisoryRxSpeed Advisory receive speed, in kilobits per second (kbps),
of this subinterface. This object has no impact on
forwarding performance but may be used as a hint for
underlying circuit r… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.34.1.4.2.1.8 |
| juniVlanSubIfVlanAdvisoryTxSpeed Advisory transmit speed, in kilobits per second (kbps),
of this subinterface. This object has no impact on
forwarding performance but may be used as a hint for
underlying circuit … | column | Integer32 | .1.3.6.1.4.1.4874.2.2.34.1.4.2.1.9 |