juniVlanSubIfVlanStackEthertype
Juniper-ETHERNET-MIB ·
.1.3.6.1.4.1.4874.2.2.34.1.4.2.1.7
Object
column
r/w
Enumeration
The ethertype is used to recognize and demultiplex traffic for this S-VLAN. Must be either 0x8100, 0x88a8, or 0x9100.
Context
- MIB
- Juniper-ETHERNET-MIB
- OID
.1.3.6.1.4.1.4874.2.2.34.1.4.2.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- juniVlanSubIfEntry
- Table
- juniVlanSubIfTable
- Siblings
- 8
Syntax
Enumeration
Values & Constraints
Enumerated Values
33024 | etherType8100h |
34984 | etherType88a8h |
37120 | etherType9100h |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniVlanSubIfIndex The ifIndex of the VLAN Subinterface. When creating entries in this
table, suitable values for this object are determined by reading
juniVlanSubNextIfIndex. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.4874.2.2.34.1.4.2.1.1 |
| juniVlanSubIfVlanId An integer identifier or tag ID for this VLAN A value of zero indicates
the default VLAN.
When VLANs are enabled, the value must be unique among subinterfaces
confi… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.34.1.4.2.1.2 |
| juniVlanSubIfVlanUntagged When VLANs are enabled, this allows tagged frames to be received, while
transmitted frames remain untagged. This can only be enabled when the
juniVlanSubIfVlanId field is zero. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.34.1.4.2.1.3 |
| juniVlanSubIfLowerIfIndex The ifIndex of VLAN major interface over which this VLAN Subinterface
is to be layered. A value of zero indicates no layering. An
implementation may choose to require that a non… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.4874.2.2.34.1.4.2.1.4 |
| juniVlanSubIfRowStatus Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.4874.2.2.34.1.4.2.1.5 |
| juniVlanSubIfVlanStackId An integer identifier or tag ID for this S-VLAN.
When S-VLANs are enabled, the VLAN and S-VLAN ID valuse must be unique
among subinterfaces configured on the same u… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.34.1.4.2.1.6 |
| juniVlanSubIfVlanAdvisoryRxSpeed Advisory receive speed, in kilobits per second (kbps),
of this subinterface. This object has no impact on
forwarding performance but may be used as a hint for
underlying circuit r… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.34.1.4.2.1.8 |
| juniVlanSubIfVlanAdvisoryTxSpeed Advisory transmit speed, in kilobits per second (kbps),
of this subinterface. This object has no impact on
forwarding performance but may be used as a hint for
underlying circuit … | column | Integer32 | .1.3.6.1.4.1.4874.2.2.34.1.4.2.1.9 |