Juniper-AAA-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
25
Rows
25
Columns
145

juniAaaAssignDomainTable

table
.1.3.6.1.4.1.4874.2.2.20.1.1.2.1 · 1 row entry · 21 columns
Open in standard view 
The entries in this table specify the assignment of a remote access
user to a virtual router, based on the user's domain.
juniAaaAssignDomainEntry entry .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1
A specification of the virtual router to which users on a specified
domain should be assigned.
Indexes
juniAaaAssignDomainName
Column Syntax OID
juniAaaAssignDomainName
The domain name uniquely identifying this entry.
JuniAaaDomainName
Textual Convention: JuniAaaDomainName OctetString
Type Constraints:
range: 1..63
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.1
juniAaaAssignDomainRowStatus
Controls creation/deletion of entries in this table. Only the values
'createAndGo' and 'destroy' may be SET.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.2
juniAaaAssignDomainRouterName deprecated
This variable is replaced by juniAaaAssignDomainAuthRouterName and
juniAaaAssignDomainIpRouterName. It returns same value as
juniAaaAssignDomainAuthRouterName.
Juniper-TCJuniName
Textual Convention: Juniper-TCJuniName OctetString
Type Constraints:
range: 0..256
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.3
juniAaaAssignDomainLoopback obsolete
The number of the loopback interface, associated with the specified
virtual router, whose IP address is used as the source address when
transmitting IP packets on unnumbered remote access user links.

For …
Integer32r/w
Constraints:
range: -1-32000
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.4
juniAaaAssignDomainIpHint
Enables/disables the IP hint feature, which causes the system to
allocate an IP address before going to RADIUS for authentication.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.5
juniAaaAssignDomainAtmServiceLevel
The Service category for this circuit:
ubr Unspecified bit rate (best effort).
ubrPcr Unspecified Bit Rate with Peak Cell Rate limit.
nrtVbr Non-realtime Variable Bit Rate.
cbr Constant bit rat…
Enumerationr/w
Enumerated Values:
0none
1ubr
2ubrPcr
3nrtVbr
4cbr
5rtVbr
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.6
juniAaaAssignDomainAtmPcr
Peak Cell Rate, in kilobits per second (kbps), of this circuit.

This parameter is only required when juniAaaAssignDomainAtmServiceLevel
is configured to have one of the following values:
ubrPcr
nr…
kbpsUnsigned32r/w
Constraints:
range: 0-4294967294
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.7
juniAaaAssignDomainAtmScr
Sustained Cell Rate, in kilobits per second (kbps), of this circuit.

This parameter is only required when juniAaaAssignDomainAtmServiceLevel
is configured to have one of the following values:
nrtVbr
kbpsUnsigned32r/w
Constraints:
range: 0-4294967294
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.8
juniAaaAssignDomainAtmMbs
Maximum Burst Size, in cells, of this circuit.

This parameter is only required when juniAaaAssugbDomainAtmServiceLevel
is configured to have one of the following values:
nrtVbr
cellsUnsigned32r/w
Constraints:
range: 0-4294967294
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.9
juniAaaAssignDomainOverrideUserName
The override user name associated with this entry. This object is used
to override the user name of the remote client.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.10
juniAaaAssignDomainOverridePassword
The override password for the user name defined by
juniAaaAssignDomainOverrideUserName. This object is used to override
the password part of the username/password pair of the remote client.
This value returns a string …
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.11
juniAaaAssignDomainStripDomain
Enables/disables the domain name stripping feature, which causes the
system to strip the domain name before sending the access-request to
RADIUS for authentication.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.12
juniAaaAssignDomainPoolName
The name of the local address pool from which to allocate an IP address
for the subscriber when none is returned from the authentication
server.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.13
juniAaaAssignDomainLocalInterface
The local interface, associated with the specified virtual router,
whose IP address is used as the source address when transmitting
IP packets on remote access user links.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.14
juniAaaAssignDomainIpv6RouterName
The name of the virtual router to which remote access users within this
domain are assigned for IPv6 interfaces.
Juniper-TCJuniNamer/w
Textual Convention: Juniper-TCJuniName OctetString
Type Constraints:
range: 0..256
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.15
juniAaaAssignDomainIpv6LocalInterface
The local interface, associated with the specified virtual router,
whose IPv6 address is used as the source address when transmitting IPv6
packets on remote access user links.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.16
juniAaaAssignDomainTunnelGroup
The tunnel group assigned to this domain map. Non default
configuration of this object cannot coexist with matching tunnel
entries in juniAaaAssignDomainTunnelTable.
JuniAaaTunnelGroupNamer/w
Textual Convention: JuniAaaTunnelGroupName OctetString
Type Constraints:
range: 1..63
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.17
juniAaaAssignDomainAuthRouterName
The name of the virtual router where remote access users within this
domain will be authenticated.
Juniper-TCJuniNamer/w
Textual Convention: Juniper-TCJuniName OctetString
Type Constraints:
range: 0..256
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.18
juniAaaAssignDomainIpRouterName
The name of the virtual router to which remote access users within this
domain are assigned for IP interfaces.
Juniper-TCJuniNamer/w
Textual Convention: Juniper-TCJuniName OctetString
Type Constraints:
range: 0..256
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.19
juniAaaAssignDomainTunnelSubscriberAuthentication
When there are tunnel configurations under this domain, enable or
disable subscribers of this domain authenticate with configured
authentication server.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.20
juniAaaAssignDomainBackupPoolName
The name of the backup local address pool from which to allocate an IP address
for the subscriber when the primary address pool is 100% allocated
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.21

juniAaaAssignDomainTunnelTable

table
.1.3.6.1.4.1.4874.2.2.20.1.1.2.2 · 1 row entry · 17 columns
Open in standard view 
The entries in this table specify the tunnels associated with a
domain.
juniAaaAssignDomainTunnelEntry entry .1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1
A specification of the tunnels associated with a domain.
Indexes
juniAaaAssignDomainTunnelName juniAaaAssignDomainTunnelTag
Column Syntax OID
juniAaaAssignDomainTunnelName
The domain name associated with this entry.
JuniAaaDomainName
Textual Convention: JuniAaaDomainName OctetString
Type Constraints:
range: 1..63
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.1
juniAaaAssignDomainTunnelTag
The tunnel tag value associated with this entry.
Integer32
Constraints:
range: 1-31
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.2
juniAaaAssignDomainTunnelPreference
The tunnel's preference value associated with this entry. The value 0
is the highest preference.
Integer32r/w
Constraints:
range: 0-2000
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.3
juniAaaAssignDomainTunnelType
The tunnel type associated with this entry. Attempts to set this
object to tunnelUnknown(2) and tunnelL2f(3) will fail (wrongValue).
Enumerationr/w
Enumerated Values:
1tunnelL2tp
2tunnelUnknown
3tunnelL2f
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.4
juniAaaAssignDomainTunnelMedium
The tunnel medium associated with this entry. The medium dictates the
format of the tunnel address. Attempts to set this object to
tunnelMediumUnknown(2) will fail (wrongValue).
Enumerationr/w
Enumerated Values:
1tunnelMediumIPv4
2tunnelMediumUnknown
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.5
juniAaaAssignDomainTunnelAddress
The tunnel server address associated with this entry. The
juniAaaAssignDomainTunnelMedium object defines the format of the
address.

MEDIUM EXAMPLE FORMAT
tunnelMedium_IPv4 xyz.xy…
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.6
juniAaaAssignDomainTunnelPassword
The tunnel password associated with this entry. The object returns a
null length string on reads due to security concerns.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.7
juniAaaAssignDomainTunnelId
The tunnel identifier associated with this entry. The tunnel
identifier is used to distinguish between multiple tunnels to the same
juniAaaAssignDomainTunnelAddress.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.8
juniAaaAssignDomainTunnelHostName
The tunnel client hostname associated with this entry. This object is
analogous to the RADIUS attribute Tunnel-Client-Auth-ID. When a tunnel
is established with a peer, this object can be used to distinguish
groups of…
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.9
juniAaaAssignDomainTunnelRowStatus
Controls creation/deletion of entries in this table. Only the values
'createAndGo' and 'destroy' may be SET.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.10
juniAaaAssignDomainTunnelServerName
The tunnel server hostname associated with this entry. This object is
analogous to the RADIUS attribute Tunnel-Server-Auth-ID. When a tunnel
is established with a peer, this object can be used to distinguish
groups of…
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.11
juniAaaAssignDomainTunnelClientAddress
The tunnel client address associated with this entry. The
juniAaaAssignDomainTunnelMedium object defines the format of the
address.

MEDIUM EXAMPLE FORMAT
tunnelMedium_IPv4 xyz.xy…
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.12
juniAaaAssignDomainTunnelMaxSessions
The tunnel's max-session value associated with this entry. The value 0
indicates no maximum session value.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.13
juniAaaAssignDomainTunnelReceiveWindowSize
For an L2TP tunnel this object represents the receive window
size. A value of 0 indicates that this object has no effect
on the tunnel's receive window size.
Integer32r/w
Constraints:
range: 0-0
range: 4-4
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.14
juniAaaAssignDomainTunnelFailoverResync
For an L2TP tunnel this object represents the failover resync
mechanism:
disable(0) - Disable failover resync
failoverProtocol(1) - Use the L2TP Failover Protocol
silentFailover(2) - Use the JUNOSe Silent Failover Mech…
Enumerationr/w
Enumerated Values:
0disable
1failoverProtocol
2silentFailover
3failoverProtocolFallbackToSilentFailover
4notConfigured
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.15
juniAaaAssignDomainTunnelSwitchProfile
The name of the L2TP tunnel switch profile to apply in tunnel
switching scenarios.
JuniAaaTunnelSwitchProfileNamer/w
Textual Convention: JuniAaaTunnelSwitchProfileName OctetString
Type Constraints:
range: 0..64
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.16
juniAaaAssignDomainTunnelTxConnectSpeedMethod
For an L2TP tunnel this object represents the tx connect speed method
mechanism at the LAC:
notSet(0) - this parameter has not been configured
staticLayer2(1) - use static layer 2 settings
dynamicLayer2(2) - use…
Enumerationr/w
Enumerated Values:
0notSet
1staticLayer2
2dynamicLayer2
3qos
4actual
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.17

juniAaaAssignDomainPadnTable

table
.1.3.6.1.4.1.4874.2.2.20.1.1.2.3 · 1 row entry · 4 columns
Open in standard view 
The entries in this table specify the PPPoE active discovery network
(PADN) parameters associated with a domain.
juniAaaAssignDomainPadnEntry entry .1.3.6.1.4.1.4874.2.2.20.1.1.2.3.1
A specification of the PPPoE active discovery network parameters
associated with a domain.
Indexes
juniAaaAssignDomainName juniAaaAssignDomainPadnIpAddress juniAaaAssignDomainPadnIpMask
Column Syntax OID
juniAaaAssignDomainPadnIpAddress
The IP address of this entry.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.3.1.1
juniAaaAssignDomainPadnIpMask
The IP mask of this entry.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.3.1.2
juniAaaAssignDomainPadnRowStatus
Controls creation/deletion of entries in this table. Only the values
'createAndGo' and 'destroy' may be SET.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.3.1.3
juniAaaAssignDomainPadnDistance
The administrative distance metric of this entry.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.4874.2.2.20.1.1.2.3.1.4

juniAaaAuthMethodsTable

table
.1.3.6.1.4.1.4874.2.2.20.1.2.1.2 · 1 row entry · 2 columns
Open in standard view 
The entries in this table specify the assignment of authentication methods
for a particular subscriber type.
juniAaaAuthMethodsEntry entry .1.3.6.1.4.1.4874.2.2.20.1.2.1.2.1
A specification of the authentication methods for a particular
subscriber type.
Indexes
juniAaaAuthMethodsSubscriberType
Column Syntax OID
juniAaaAuthMethodsSubscriberType
The subscriber type.
JuniAaaAuthenticationSubscriberTypes
Textual Convention: JuniAaaAuthenticationSubscriberTypes Enumeration
Type Values:
1ppp
2atm1483
3ip
4tunnel
5radiusRelay
6ipsec
 .1.3.6.1.4.1.4874.2.2.20.1.2.1.2.1.1
juniAaaAuthMethodsAuthentication
The set of authentication protocols configured on this system. Each
octet in this object contains one of the values defined in the
JuniAaaAuthenticationMethods TEXTUAL-CONVENTION.

The system will sequenc…
OctetStringr/w
Constraints:
range: 0-5
 .1.3.6.1.4.1.4874.2.2.20.1.2.1.2.1.2

juniAaaLocalAuthUserTable

table
.1.3.6.1.4.1.4874.2.2.20.1.2.2.1.1 · 1 row entry · 7 columns
Open in standard view 
This table contains entries for users present in the
local user databases.
juniAaaLocalAuthUserEntry entry .1.3.6.1.4.1.4874.2.2.20.1.2.2.1.1.1
Each entry in this table represents a single user in a local
user database.
Indexes
juniAaaLocalAuthUserDbName juniAaaLocalAuthUserName
Column Syntax OID
juniAaaLocalAuthUserName
The name of the user.
OctetString
Constraints:
range: 1-64
 .1.3.6.1.4.1.4874.2.2.20.1.2.2.1.1.1.1
juniAaaLocalAuthUserRowStatus
Controls creation/deletion of entries in this table. Only
'createAndGo' and 'destroy' enumeration values are supported.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.20.1.2.2.1.1.1.2
juniAaaLocalAuthUserPassword
The password for this user. If the juniAaaLocalAuthUserEncrypted
object is not set with this object, the password value is assumed
to be unencrypted. When set, any existing password is overwritten.
Setting a zero leng…
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.4874.2.2.20.1.2.2.1.1.1.3
juniAaaLocalAuthUserEncryption
The encryption type of the password value being set with the
juniAaaLocalAuthUserPassword object. Reading this object always
results in a value of encryptionNone.

encyptionNone - The password is unen…
Enumerationr/w
Enumerated Values:
0encryptionNone
5encryptionSecret
8encryptionPassword
 .1.3.6.1.4.1.4874.2.2.20.1.2.2.1.1.1.4
juniAaaLocalAuthUserIpAddress
The IP address this user is to be assigned, once authenticated.
This object corresponds to the Framed-IP-Address attribute in RADIUS
authentication servers.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.20.1.2.2.1.1.1.5
juniAaaLocalAuthUserIpAddressPool
The name of the local address pool this user is to be allocated an
IP address from, once authenticated. This object corresponds to the
Framed-Pool attribute in RADIUS authentication servers.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.4874.2.2.20.1.2.2.1.1.1.6
juniAaaLocalAuthUserRouterName
The name of the router this user is to be assigned to, once
authenticated. This object corresponds to the Unispher-Virtual-Router
attribute in RADIUS authentication servers.
Juniper-TCJuniNamer/w
Textual Convention: Juniper-TCJuniName OctetString
Type Constraints:
range: 0..256
 .1.3.6.1.4.1.4874.2.2.20.1.2.2.1.1.1.7

juniAaaLocalAuthUserDbTable

table
.1.3.6.1.4.1.4874.2.2.20.1.2.2.2.1 · 1 row entry · 2 columns
Open in standard view 
This table contains entries for local user databases.
juniAaaLocalAuthUserDbEntry entry .1.3.6.1.4.1.4874.2.2.20.1.2.2.2.1.1
Each entry in this table represents a single local user database.
Indexes
juniAaaLocalAuthUserDbName
Column Syntax OID
juniAaaLocalAuthUserDbName
The name of this local user database.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.4874.2.2.20.1.2.2.2.1.1.1
juniAaaLocalAuthUserDbRowStatus
Controls creation/deletion of entries in this table. Only
'createAndGo' and 'destroy' enumeration values are supported.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.20.1.2.2.2.1.1.2

juniAaaLocalAuthUserDbAssocTable

table
.1.3.6.1.4.1.4874.2.2.20.1.2.2.3.1 · 1 row entry · 2 columns
Open in standard view 
This table contains entries that identify the local user
database that is associated with each virtual router.
juniAaaLocalAuthUserDbAssocEntry entry .1.3.6.1.4.1.4874.2.2.20.1.2.2.3.1.1
Each entry in this table represents a single association
between a virtual router and local user database. The same
database can be referenced by multiple virtual routers; however,
a virtual router can reference only o…
Indexes
Juniper-ROUTER-MIBjuniRouterIndex
Column Syntax OID
juniAaaLocalAuthUserDbAssocRowStatus
Controls creation/deletion of entries in this table. Only
'createAndGo' and 'destroy' enumeration values are supported.

When a virtual router is deleted, its corresponding entries
in this table will be d…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.20.1.2.2.3.1.1.1
juniAaaLocalAuthUserDbAssocDbName
The name of local user database associated with this virtual
router. Setting the name to the default local user database,
'default', will delete this entry, as this is the default
association for all virtual routers.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.4874.2.2.20.1.2.2.3.1.1.2

juniAaaAcctMethodsTable

table
.1.3.6.1.4.1.4874.2.2.20.1.3.1.7 · 1 row entry · 2 columns
Open in standard view 
The entries in this table specify the assignment of accounting methods
for a particular subscriber type.
juniAaaAcctMethodsEntry entry .1.3.6.1.4.1.4874.2.2.20.1.3.1.7.1
A specification of the accounting methods for a particular
subscriber type.
Indexes
juniAaaAcctMethodsSubscriberType
Column Syntax OID
juniAaaAcctMethodsSubscriberType
The subscriber type.
JuniAaaAccountingSubscriberTypes
Textual Convention: JuniAaaAccountingSubscriberTypes Enumeration
Type Values:
1ppp
2atm1483
3ip
4tunnel
5radiusRelay
6ipsec
 .1.3.6.1.4.1.4874.2.2.20.1.3.1.7.1.1
juniAaaAcctMethodsAccounting
The set of accounting protocols configured on this system. Each octet
in this object contains one of the values defined in the
JuniAaaAccountingMethods TEXTUAL CONVENTION.

The system will sequence throug…
OctetStringr/w
Constraints:
range: 0-5
 .1.3.6.1.4.1.4874.2.2.20.1.3.1.7.1.2

juniAaaAcctBcastServerGroupTable

table
.1.3.6.1.4.1.4874.2.2.20.1.3.2.1 · 1 row entry · 6 columns
Open in standard view 
The entries in this table specify broadcast accounting routers
of the named group. 
          
In addition to row status operations if juniAaaAcctBrasServerGroupRouter1,
juniAaaAcctBrasServerGroupRouter2, juniAaaAcctBrasServerGroupRouter3 and
juniAaaAcctBrasServerGroupRouter4 are all set zero length strings,
the entry will be deleted.
          
At least one non zero length string router is required to
successfully create and entry. All non zero length string
routers have to be unique within the group.
juniAaaAcctBcastServerGroupEntry entry .1.3.6.1.4.1.4874.2.2.20.1.3.2.1.1
A specification of the accounting servers for a particular
group.
Indexes
juniAaaAcctBcastServerGroup
Column Syntax OID
juniAaaAcctBcastServerGroup
The group name.
Juniper-TCJuniVrfGroupName
Textual Convention: Juniper-TCJuniVrfGroupName OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.4874.2.2.20.1.3.2.1.1.1
juniAaaAcctBcastServerGroupRouter1
The name of the first router in the group.
Juniper-TCJuniNamer/w
Textual Convention: Juniper-TCJuniName OctetString
Type Constraints:
range: 0..256
 .1.3.6.1.4.1.4874.2.2.20.1.3.2.1.1.2
juniAaaAcctBcastServerGroupRouter2
The name of the second router in the group.
Juniper-TCJuniNamer/w
Textual Convention: Juniper-TCJuniName OctetString
Type Constraints:
range: 0..256
 .1.3.6.1.4.1.4874.2.2.20.1.3.2.1.1.3
juniAaaAcctBcastServerGroupRouter3
The name of the third router in the group.
Juniper-TCJuniNamer/w
Textual Convention: Juniper-TCJuniName OctetString
Type Constraints:
range: 0..256
 .1.3.6.1.4.1.4874.2.2.20.1.3.2.1.1.4
juniAaaAcctBcastServerGroupRouter4
The name of the third router in the group.
Juniper-TCJuniNamer/w
Textual Convention: Juniper-TCJuniName OctetString
Type Constraints:
range: 0..256
 .1.3.6.1.4.1.4874.2.2.20.1.3.2.1.1.5
juniAaaAcctBcastServerGroupRowStatus
Controls creation/deletion of entries in this table. Only the values
'createAndGo' and 'destroy' may be SET.
In addition to row status operations if
juniAaaAcctBrasServerGroupRouter1, juniAaaAcctBrasServerGroupRouter2,…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.20.1.3.2.1.1.6

juniAaaTunnelGroupTable

table
.1.3.6.1.4.1.4874.2.2.20.1.7.2.1 · 1 row entry · 2 columns
Open in standard view 
The entries in this table specify tunnel attributes sufficient tunnel establishment.
juniAaaTunnelGroupEntry entry .1.3.6.1.4.1.4874.2.2.20.1.7.2.1.1
An entry in the tunnel group table.
Indexes
juniAaaTunnelGroupName
Column Syntax OID
juniAaaTunnelGroupName
The tunnel group name uniquely identifying this entry.
JuniAaaTunnelGroupName
Textual Convention: JuniAaaTunnelGroupName OctetString
Type Constraints:
range: 1..63
 .1.3.6.1.4.1.4874.2.2.20.1.7.2.1.1.1
juniAaaTunnelGroupRowStatus
Controls creation/deletion of entries in this table. Only the values
'createAndGo' and 'destroy' may be SET.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.20.1.7.2.1.1.2

juniAaaTunnelGroupTunnelTable

table
.1.3.6.1.4.1.4874.2.2.20.1.7.2.2 · 1 row entry · 18 columns
Open in standard view 
The entries in this table specify the tunnels associated with a
tunnel group.
juniAaaTunnelGroupTunnelEntry entry .1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1
A specification of the tunnels associated with a tunnel group.
Indexes
juniAaaTunnelGroupTunnelName juniAaaTunnelGroupTunnelTag
Column Syntax OID
juniAaaTunnelGroupTunnelName
The tunnel group name associated with this entry.
JuniAaaTunnelGroupName
Textual Convention: JuniAaaTunnelGroupName OctetString
Type Constraints:
range: 1..63
 .1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.1
juniAaaTunnelGroupTunnelTag
The tunnel tag value associated with this entry.
Integer32
Constraints:
range: 1-31
 .1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.2
juniAaaTunnelGroupTunnelPreference
The tunnel's preference value associated with this entry. The value 0
is the highest preference.
Integer32r/w
Constraints:
range: 0-2000
 .1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.3
juniAaaTunnelGroupTunnelType
The tunnel type associated with this entry.
Enumerationr/w
Enumerated Values:
1tunnelL2tp
 .1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.4
juniAaaTunnelGroupTunnelMedium
The tunnel medium associated with this entry. The medium dictates the
format of the tunnel address. Attempts to set this object to
tunnelMediumUnknown(2) will fail (wrongValue).
Enumerationr/w
Enumerated Values:
1tunnelMediumIPv4
2tunnelMediumUnknown
 .1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.5
juniAaaTunnelGroupTunnelAddress
The tunnel server address associated with this entry. The
juniAaaTunnelGroupTunnelMedium object defines the format of the
address.

MEDIUM EXAMPLE FORMAT
tunnelMedium_IPv4 xyz.xyz…
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.6
juniAaaTunnelGroupTunnelPassword
The tunnel password associated with this entry. The object returns a
null length string on reads due to security concerns.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.7
juniAaaTunnelGroupTunnelId
The tunnel identifier associated with this entry. The tunnel
identifier is used to distinguish between multiple tunnels to the same
juniAaaTunnelGroupTunnelAddress.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.8
juniAaaTunnelGroupTunnelHostName
The tunnel client hostname associated with this entry. This object is
analogous to the RADIUS attribute Tunnel-Client-Auth-ID. When a tunnel
is established with a peer, this object can be used to distinguish
groups of…
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.9
juniAaaTunnelGroupTunnelRowStatus
Controls creation/deletion of entries in this table. Only the values
'createAndGo' and 'destroy' may be SET.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.10
juniAaaTunnelGroupTunnelServerName
The tunnel server hostname associated with this entry. This object is
analogous to the RADIUS attribute Tunnel-Server-Auth-ID. When a tunnel
is established with a peer, this object can be used to distinguish
groups of…
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.11
juniAaaTunnelGroupTunnelClientAddress
The tunnel client address associated with this entry. The
juniAaaTunnelGroupTunnelMedium object defines the format of the
address.

MEDIUM EXAMPLE FORMAT
tunnelMedium_IPv4 xyz.xyz…
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.12
juniAaaTunnelGroupTunnelMaxSessions
The tunnel's max-session value associated with this entry. The value 0
indicates no maximum session value.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.13
juniAaaTunnelGroupTunnelReceiveWindowSize
For an L2TP tunnel this object represents the receive window
size. A value of 0 indicates that this object has no effect
on the tunnel's receive window size.
Integer32r/w
Constraints:
range: 0-0
range: 4-4
 .1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.14
juniAaaTunnelGroupTunnelRouterName
The name of the virtual router to which remote access users within this
tunnel are assigned.
Juniper-TCJuniNamer/w
Textual Convention: Juniper-TCJuniName OctetString
Type Constraints:
range: 0..256
 .1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.15
juniAaaTunnelGroupTunnelFailoverResync
For an L2TP tunnel this object represents the failover resync
mechanism:
disable(0) - Disable failover resync
failoverProtocol(1) - Use the L2TP Failover Protocol
silentFailover(2) - Use the JUNOSe Silent Failover Mech…
Enumerationr/w
Enumerated Values:
0disable
1failoverProtocol
2silentFailover
3failoverProtocolFallbackToSilentFailover
4notConfigured
 .1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.16
juniAaaTunnelGroupTunnelSwitchProfile
The name of the L2TP tunnel switch profile to apply in tunnel
switching scenarios.
JuniAaaTunnelSwitchProfileNamer/w
Textual Convention: JuniAaaTunnelSwitchProfileName OctetString
Type Constraints:
range: 0..64
 .1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.17
juniAaaTunnelGroupTunnelTxConnectSpeedMethod
For an L2TP tunnel this object represents the tx connect speed method
mechanism at the LAC:
notSet(0) - this parameter has not been configured
staticLayer2(1) - use static layer 2 settings
dynamicLayer2(2) - use…
Enumerationr/w
Enumerated Values:
0notSet
1staticLayer2
2dynamicLayer2
3qos
4actual
 .1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.18

juniAaaSubscriberTable

table
.1.3.6.1.4.1.4874.2.2.20.1.8.4 · 1 row entry · 17 columns
Open in standard view 
The entries in this table represent subscribers by subscriber handle
value.
juniAaaSubscriberEntry entry .1.3.6.1.4.1.4874.2.2.20.1.8.4.1
A specification of subscribers by subscriber handle.
Indexes
juniAaaSubscriberHandle
Column Syntax OID
juniAaaSubscriberHandle
The subscriber handle associated with this subscriber. A subscriber
handle is a monotomically increasing integer.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.20.1.8.4.1.1
juniAaaSubscriberUserName
The RADIUS userName associated with this subscriber.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4874.2.2.20.1.8.4.1.2
juniAaaSubscriberRouterName
The virtual router assigned to this subscriber.
Juniper-TCJuniName
Textual Convention: Juniper-TCJuniName OctetString
Type Constraints:
range: 0..256
 .1.3.6.1.4.1.4874.2.2.20.1.8.4.1.3
juniAaaSubscriberRouterIndex
The router index that identifies the virtual router associated with
this subscriber. The value of this object can be used to index the
router in the juniRouterTable.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.20.1.8.4.1.4
juniAaaSubscriberLoginTime
The time this subscriber logged in to RADIUS server.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4874.2.2.20.1.8.4.1.5
juniAaaSubscriberIpAddress
The client IP Address assigned to this subscriber.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.20.1.8.4.1.6
juniAaaSubscriberIpAddressMask
The client IP Address Mask assigned to this subscriber.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.20.1.8.4.1.7
juniAaaSubscriberAddrAssignType
The address assignment type for this subscriber.
JuniAddressAssignType
Textual Convention: JuniAddressAssignType Enumeration
Type Values:
0none
1radius
2localPool
3dhcp
4user
5application
6localAuthenticationServer
7notSet
 .1.3.6.1.4.1.4874.2.2.20.1.8.4.1.8
juniAaaSubscriberInterfaceId
A text string describing the local interface associated with this
subscriber. Types/formats/examples for this string include:

ERX: <portLocation> == <slot>/<port>;
E320: <portLocation> == <slot>/<adapte…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4874.2.2.20.1.8.4.1.9
juniAaaSubscriberState
The state of this subscriber.
JuniSubscriberState
Textual Convention: JuniSubscriberState Bits
Type Values:
0pending
1established
2deleting
3tunneling
4tunnelAcct
5terminated
6counted
7clientHandleSet
8sentAcctStart
 .1.3.6.1.4.1.4874.2.2.20.1.8.4.1.10
juniAaaSubscriberClientType
The client type for this subscriber. Certain client types (e.g.,
'other') might be suppressed from representation in this table.
JuniSubscriberClientType
Textual Convention: JuniSubscriberClientType Enumeration
Type Values:
0ppp
1login
2ip
3config
4tunnel
5other
 .1.3.6.1.4.1.4874.2.2.20.1.8.4.1.11
juniAaaSubscriberIngressPolicyName
The Ingress Policy Name associated with this subscriber.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4874.2.2.20.1.8.4.1.12
juniAaaSubscriberEgressPolicyName
The Egress Policy Name associated with this subscriber.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4874.2.2.20.1.8.4.1.13
juniAaaSubscriberQosProfileName
The QoS Profile Name associated with this subscriber.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4874.2.2.20.1.8.4.1.14
juniAaaSubscriberRowStatus
Controls the deletion of the subscriber from this table. Deletion of
the subscriber is analogous to logging the subscriber out of the
network.

Note: only 'destroy' is supported for SNMP SET operations.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.20.1.8.4.1.15
juniAaaSubscriberIpv6RouterIndex
The router index that identifies the virtual router associated with
this subscriber's IPv6 interface. The value of this object can be used
to index the router in the juniRouterTable.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.20.1.8.4.1.16
juniAaaSubscriberIpv6AddrIfIdentifier
The client IPv6 Address Interface Identifier assigned to this
subscriber.
IPV6-TCIpv6AddressIfIdentifier
Textual Convention: IPV6-TCIpv6AddressIfIdentifier OctetString
Type Constraints:
range: 0..8
 .1.3.6.1.4.1.4874.2.2.20.1.8.4.1.17

juniAaaSubscriberRouterSummaryTable

table
.1.3.6.1.4.1.4874.2.2.20.1.8.5 · 1 row entry · 2 columns
Open in standard view 
The entries in this table report number of subscribers per router.
juniAaaSubscriberRouterSummaryEntry entry .1.3.6.1.4.1.4874.2.2.20.1.8.5.1
A specification of subscribers for a router.
Indexes
juniAaaSubscriberRouterSummaryRouterIndex
Column Syntax OID
juniAaaSubscriberRouterSummaryRouterIndex
The router index of the virtual router. The value of this object can
be used to retrieve additional information in the router mib.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.20.1.8.5.1.1
juniAaaSubscriberRouterSummaryCount
The number of subscribers on this router.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.20.1.8.5.1.2

juniAaaSubscriberRouterTable

table
.1.3.6.1.4.1.4874.2.2.20.1.8.6 · 1 row entry · 3 columns
Open in standard view 
The entries in this table sort subscribers by router ID.
juniAaaSubscriberRouterEntry entry .1.3.6.1.4.1.4874.2.2.20.1.8.6.1
A specification of subscribers by router ID.
Indexes
juniAaaSubscriberRouterRouterIndex juniAaaSubscriberRouterHandle
Column Syntax OID
juniAaaSubscriberRouterRouterIndex
The router index of the virtual router. The value of this object can
be used to retrieve additional information in the router MIB.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.20.1.8.6.1.1
juniAaaSubscriberRouterHandle
The subscriber handle associated with this subscriber. A subscriber
handle is a monotonically increasing integer.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.20.1.8.6.1.2
juniAaaSubscriberRouterRowStatus
Always has value 'active'.
SNMPv2-TCRowStatus
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.20.1.8.6.1.3

juniAaaSubscriberLocationSummaryTable

table
.1.3.6.1.4.1.4874.2.2.20.1.8.8 · 1 row entry · 2 columns
Open in standard view 
The entries in this table report number of subscribers per interface
location.
juniAaaSubscriberLocationSummaryEntry entry .1.3.6.1.4.1.4874.2.2.20.1.8.8.1
A specification of subscribers on an interface location.
Indexes
juniAaaSubscriberLocationSummaryLocationIndex
Column Syntax OID
juniAaaSubscriberLocationSummaryLocationIndex
The value of a platform interface location.
Juniper-TCJuniInterfaceLocationValue
Textual Convention: Juniper-TCJuniInterfaceLocationValue OctetString
Type Constraints:
range: 1..16
 .1.3.6.1.4.1.4874.2.2.20.1.8.8.1.1
juniAaaSubscriberLocationSummaryCount
The number of subscribers associated with this interface location.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.20.1.8.8.1.2

juniAaaSubscriberLocationTable

table
.1.3.6.1.4.1.4874.2.2.20.1.8.9 · 1 row entry · 3 columns
Open in standard view 
The entries in this table sort subscribers by interface location.
juniAaaSubscriberLocationEntry entry .1.3.6.1.4.1.4874.2.2.20.1.8.9.1
An association of a subscriber to an interface location.
Indexes
juniAaaSubscriberLocationLocationIndex juniAaaSubscriberLocationHandle
Column Syntax OID
juniAaaSubscriberLocationLocationIndex
The value of a platform interface location.
Juniper-TCJuniInterfaceLocationValue
Textual Convention: Juniper-TCJuniInterfaceLocationValue OctetString
Type Constraints:
range: 1..16
 .1.3.6.1.4.1.4874.2.2.20.1.8.9.1.1
juniAaaSubscriberLocationHandle
The subscriber handle associated with this subscriber. A subscriber
handle is a monotonically increasing integer.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.20.1.8.9.1.2
juniAaaSubscriberLocationRowStatus
Always has value 'active'.
SNMPv2-TCRowStatus
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.20.1.8.9.1.3

juniAaaSubscriberIpv6AddrPrefixTable

table
.1.3.6.1.4.1.4874.2.2.20.1.8.12 · 1 row entry · 2 columns
Open in standard view 
The entries in this table represent IPv6 Address Prefixes by subscriber
handle value.
juniAaaSubscriberIpv6AddrPrefixEntry entry .1.3.6.1.4.1.4874.2.2.20.1.8.12.1
A specification of IPv6 Address Prefixes by subscriber handle.
Indexes
juniAaaSubscriberHandle juniAaaSubscriberIpv6AddrPrefix juniAaaSubscriberIpv6AddrPrefixSize
Column Syntax OID
juniAaaSubscriberIpv6AddrPrefix
The client IPv6 Address Prefix assigned to this subscriber.
IPV6-TCIpv6AddressPrefix
Textual Convention: IPV6-TCIpv6AddressPrefix OctetString
Type Constraints:
range: 0..16
 .1.3.6.1.4.1.4874.2.2.20.1.8.12.1.1
juniAaaSubscriberIpv6AddrPrefixSize
The size of the client IPv6 Address Prefix assigned to this
subscriber.
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.4874.2.2.20.1.8.12.1.2

juniAaaSubscriberExtTable

table
.1.3.6.1.4.1.4874.2.2.20.1.8.13 · 1 row entry · 14 columns
Open in standard view 
The entries in this table represent subscribers extension attributes 
by subscriber handle value.
juniAaaSubscriberExtEntry entry .1.3.6.1.4.1.4874.2.2.20.1.8.13.1
A specification of subscribers extension attributes by subscriber
handle.
Indexes
juniAaaSubscriberHandle
Column Syntax OID
juniAaaSubscriberExtUserName
The user name associated with this subscriber.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4874.2.2.20.1.8.13.1.1
juniAaaSubscriberExtLoginTime
The time this subscriber logged in using AAA protocol.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4874.2.2.20.1.8.13.1.2
juniAaaSubscriberExtIpAddress
The client IP Address assigned to this subscriber.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.20.1.8.13.1.3
juniAaaSubscriberExtIpAddressMask
The client IP Address Mask assigned to this subscriber.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.20.1.8.13.1.4
juniAaaSubscriberExtAddrAssignType
The address assignment type for this subscriber.
JuniAddressAssignType
Textual Convention: JuniAddressAssignType Enumeration
Type Values:
0none
1radius
2localPool
3dhcp
4user
5application
6localAuthenticationServer
7notSet
 .1.3.6.1.4.1.4874.2.2.20.1.8.13.1.5
juniAaaSubscriberExtState
The state of this subscriber.
JuniSubscriberState
Textual Convention: JuniSubscriberState Bits
Type Values:
0pending
1established
2deleting
3tunneling
4tunnelAcct
5terminated
6counted
7clientHandleSet
8sentAcctStart
 .1.3.6.1.4.1.4874.2.2.20.1.8.13.1.6
juniAaaSubscriberExtClientType
The client type for this subscriber. Certain client types (e.g.,
'other') might be suppressed from representation in this table.
JuniSubscriberClientType
Textual Convention: JuniSubscriberClientType Enumeration
Type Values:
0ppp
1login
2ip
3config
4tunnel
5other
 .1.3.6.1.4.1.4874.2.2.20.1.8.13.1.7
juniAaaSubscriberExtAcctSessionId
Account session ID associated with this subscriber. The value
and encoding of this attribute depends on the way AAA protocol is
configured. For example it is attribute 44 for RADIUS.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4874.2.2.20.1.8.13.1.8
juniAaaSubscriberExtClass
Classification attribute associated with this subscriber. The value
and encoding of this attribute depends on the way AAA protocol is
configured. For example it is attribute 25 for RADIUS.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4874.2.2.20.1.8.13.1.9
juniAaaSubscriberExtNasPort
Associated NAS port with this subscriber. The value and encoding of
this attribute depends on the way AAA protocol is configured. For
example it is attribute 5 for RADIUS.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.20.1.8.13.1.10
juniAaaSubscriberExtNasPortType
Associated NAS port type attribute associated with this subscriber.
The value and encoding of this attribute depends on the way AAA protocol
is configured. For example it is attribute 61 for RADIUS.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.20.1.8.13.1.11
juniAaaSubscriberExtCalledStationId
Called ID associated with this subscriber. The value and encoding of
this attribute depends on the way AAA protocol is configured. For
example it is attribute 30 for RADIUS.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.4874.2.2.20.1.8.13.1.12
juniAaaSubscriberExtCallingStationId
Calling ID associated with this subscriber. The value and
encoding of this attribute depends on the way AAA protocol
is configured. For example it is attribute 31 for RADIUS.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.4874.2.2.20.1.8.13.1.13
juniAaaSubscriberExtL2tpTunnelId
L2TP Tunnel ID associated with this subscriber of concerned LNS.
A value 0 for this attribute indicates the terminated subscriber.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.4874.2.2.20.1.8.13.1.14

juniAaaSubscriberInterfaceSummaryTable

table
.1.3.6.1.4.1.4874.2.2.20.1.8.14 · 1 row entry · 3 columns
Open in standard view 
The entries in this table report number of subscribers per subscriber
interface which includes the port type (1 = atm; 2 = ethernet), slot,
port and sub-interface.
juniAaaSubscriberInterfaceSummaryEntry entry .1.3.6.1.4.1.4874.2.2.20.1.8.14.1
A specification of subscribers on an subscriber interface.
Indexes
juniAaaSubscriberInterfaceSummaryIndex juniAaaSubscriberSubInterfaceSummaryIndex
Column Syntax OID
juniAaaSubscriberInterfaceSummaryIndex
The value of a subscriber interface.
JuniSubscriberInterfaceValue
Textual Convention: JuniSubscriberInterfaceValue OctetString
Type Constraints:
range: 1..16
 .1.3.6.1.4.1.4874.2.2.20.1.8.14.1.1
juniAaaSubscriberSubInterfaceSummaryIndex
The value of a subscriber sub-interface.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4874.2.2.20.1.8.14.1.2
juniAaaSubscriberInterfaceSummaryCount
The number of subscribers associated with this subscriber interface.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.20.1.8.14.1.3

juniAaaSubscriberInterfaceTable

table
.1.3.6.1.4.1.4874.2.2.20.1.8.15 · 1 row entry · 4 columns
Open in standard view 
The subscriber entries in this table sorted by subscriber interface.
juniAaaSubscriberInterfaceEntry entry .1.3.6.1.4.1.4874.2.2.20.1.8.15.1
An association of a subscriber to a subscriber interface.
Indexes
juniAaaSubscriberInterfaceIndex juniAaaSubscriberSubInterfaceIndex juniAaaSubscriberInterfaceHandle
Column Syntax OID
juniAaaSubscriberInterfaceIndex
The value of a subscriber interface. This includes the
port type (1 = ATM; 2 = Ethernet), slot, port, and sub-interface.
JuniSubscriberInterfaceValue
Textual Convention: JuniSubscriberInterfaceValue OctetString
Type Constraints:
range: 1..16
 .1.3.6.1.4.1.4874.2.2.20.1.8.15.1.1
juniAaaSubscriberSubInterfaceIndex
The value of a subscriber sub-interface.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4874.2.2.20.1.8.15.1.2
juniAaaSubscriberInterfaceHandle
The subscriber handle associated with this subscriber interface.
A subscriber handle is a monotonically increasing integer.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.20.1.8.15.1.3
juniAaaSubscriberInterfaceRowStatus
Always has value 'active'.
SNMPv2-TCRowStatus
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.20.1.8.15.1.4

juniAaaSubscriberSlotSummaryTable

table
.1.3.6.1.4.1.4874.2.2.20.1.8.16 · 1 row entry · 2 columns
Open in standard view 
The entries in this table report number of subscribers per slot.
juniAaaSubscriberSlotSummaryEntry entry .1.3.6.1.4.1.4874.2.2.20.1.8.16.1
A specification of subscribers for a slot.
Indexes
juniAaaSubscriberSlotSummarySlotIndex
Column Syntax OID
juniAaaSubscriberSlotSummarySlotIndex
The index of the slot.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.20.1.8.16.1.1
juniAaaSubscriberSlotSummaryCount
The number of subscribers on this slot.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.20.1.8.16.1.2

juniAaaSubscriberSlotTable

table
.1.3.6.1.4.1.4874.2.2.20.1.8.17 · 1 row entry · 3 columns
Open in standard view 
The subscriber in this table sorted by slot.
juniAaaSubscriberSlotEntry entry .1.3.6.1.4.1.4874.2.2.20.1.8.17.1
A specification of subscribers by slot.
Indexes
juniAaaSubscriberSlotIndex juniAaaSubscriberSlotHandle
Column Syntax OID
juniAaaSubscriberSlotIndex
The index of the slot.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.20.1.8.17.1.1
juniAaaSubscriberSlotHandle
The subscriber handle associated with this slot. The subscriber
handle is a monotonically increasing integer.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.20.1.8.17.1.2
juniAaaSubscriberSlotRowStatus
Always has value 'active'.
SNMPv2-TCRowStatus
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.20.1.8.17.1.3

juniAaaSubscriberProfileSummaryTable

table
.1.3.6.1.4.1.4874.2.2.20.1.8.18 · 1 row entry · 2 columns
Open in standard view 
The entries in this table report number of subscribers per profile.
juniAaaSubscriberProfileSummaryEntry entry .1.3.6.1.4.1.4874.2.2.20.1.8.18.1
A specification of subscribers for a profile.
Indexes
juniAaaSubscriberProfileSummaryProfileName
Column Syntax OID
juniAaaSubscriberProfileSummaryProfileName
The name of the profile.
OctetString
Constraints:
range: 1-80
 .1.3.6.1.4.1.4874.2.2.20.1.8.18.1.1
juniAaaSubscriberProfileSummaryCount
The number of subscribers on this profile.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.20.1.8.18.1.2

juniAaaSubscriberProfileTable

table
.1.3.6.1.4.1.4874.2.2.20.1.8.19 · 1 row entry · 3 columns
Open in standard view 
The entries in this table sort subscribers by profileName + profileHandle.
juniAaaSubscriberProfileEntry entry .1.3.6.1.4.1.4874.2.2.20.1.8.19.1
A specification of subscribers by profile ID.
Indexes
juniAaaSubscriberProfileName juniAaaSubscriberProfileHandle
Column Syntax OID
juniAaaSubscriberProfileName
The DCM profile name associated with this subscriber.
OctetString
Constraints:
range: 1-80
 .1.3.6.1.4.1.4874.2.2.20.1.8.19.1.1
juniAaaSubscriberProfileHandle
The subscriber handle associated with this subscriber. A subscriber
handle is a monotonically increasing integer.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.20.1.8.19.1.2
juniAaaSubscriberProfileRowStatus
Always has value 'active'.
SNMPv2-TCRowStatus
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.20.1.8.19.1.3

juniAaaSubscriberLagInterfaceSummaryTable

table
.1.3.6.1.4.1.4874.2.2.20.1.8.20 · 1 row entry · 2 columns
Open in standard view 
The entries in this table report number of subscribers per lag.
juniAaaSubscriberLagInterfaceSummaryEntry entry .1.3.6.1.4.1.4874.2.2.20.1.8.20.1
A specification of subscribers for a lag.
Indexes
juniAaaSubscriberLagInterfaceSummaryLagName
Column Syntax OID
juniAaaSubscriberLagInterfaceSummaryLagName
The name of the lag.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.4874.2.2.20.1.8.20.1.1
juniAaaSubscriberLagInterfaceSummaryCount
The number of subscribers on this lag.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.20.1.8.20.1.2