juniAaaAssignDomainAtmMbs
Juniper-AAA-MIB ·
.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.9
Object
column
r/w
cells Unsigned32
Maximum Burst Size, in cells, of this circuit.
This parameter is only required when juniAaaAssugbDomainAtmServiceLevel
is configured to have one of the following values:
nrtVbr
Context
- MIB
- Juniper-AAA-MIB
- OID
.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Units
- cells
- Parent
- juniAaaAssignDomainEntry
- Table
- juniAaaAssignDomainTable
- Siblings
- 20
Syntax
cells Unsigned32
Values & Constraints
Object Constraints
range: 0-4294967294
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniAaaAssignDomainName The domain name uniquely identifying this entry. | column | JuniAaaDomainName | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.1 |
| juniAaaAssignDomainOverrideUserName The override user name associated with this entry. This object is used
to override the user name of the remote client. | column | OctetString | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.10 |
| juniAaaAssignDomainOverridePassword The override password for the user name defined by
juniAaaAssignDomainOverrideUserName. This object is used to override
the password part of the username/password pair of the rem… | column | OctetString | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.11 |
| juniAaaAssignDomainStripDomain Enables/disables the domain name stripping feature, which causes the
system to strip the domain name before sending the access-request to
RADIUS for authentication. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.12 |
| juniAaaAssignDomainPoolName The name of the local address pool from which to allocate an IP address
for the subscriber when none is returned from the authentication
server. | column | OctetString | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.13 |
| juniAaaAssignDomainLocalInterface The local interface, associated with the specified virtual router,
whose IP address is used as the source address when transmitting
IP packets on remote access user links. | column | OctetString | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.14 |
| juniAaaAssignDomainIpv6RouterName The name of the virtual router to which remote access users within this
domain are assigned for IPv6 interfaces. | column | Juniper-TCJuniName | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.15 |
| juniAaaAssignDomainIpv6LocalInterface The local interface, associated with the specified virtual router,
whose IPv6 address is used as the source address when transmitting IPv6
packets on remote access user links. | column | OctetString | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.16 |
| juniAaaAssignDomainTunnelGroup The tunnel group assigned to this domain map. Non default
configuration of this object cannot coexist with matching tunnel
entries in juniAaaAssignDomainTunnelTable. | column | JuniAaaTunnelGroupName | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.17 |
| juniAaaAssignDomainAuthRouterName The name of the virtual router where remote access users within this
domain will be authenticated. | column | Juniper-TCJuniName | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.18 |
| juniAaaAssignDomainIpRouterName The name of the virtual router to which remote access users within this
domain are assigned for IP interfaces. | column | Juniper-TCJuniName | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.19 |
| juniAaaAssignDomainRowStatus Controls creation/deletion of entries in this table. Only the values
'createAndGo' and 'destroy' may be SET. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.2 |
| juniAaaAssignDomainTunnelSubscriberAuthentication When there are tunnel configurations under this domain, enable or
disable subscribers of this domain authenticate with configured
authentication server. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.20 |
| juniAaaAssignDomainBackupPoolName The name of the backup local address pool from which to allocate an IP address
for the subscriber when the primary address pool is 100% allocated | column | OctetString | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.21 |
| juniAaaAssignDomainRouterName deprecated This variable is replaced by juniAaaAssignDomainAuthRouterName and
juniAaaAssignDomainIpRouterName. It returns same value as
juniAaaAssignDomainAuthRouterName. | column | Juniper-TCJuniName | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.3 |
| juniAaaAssignDomainLoopback obsolete The number of the loopback interface, associated with the specified
virtual router, whose IP address is used as the source address when
transmitting IP packets on unnumbered remot… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.4 |
| juniAaaAssignDomainIpHint Enables/disables the IP hint feature, which causes the system to
allocate an IP address before going to RADIUS for authentication. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.5 |
| juniAaaAssignDomainAtmServiceLevel The Service category for this circuit:
ubr Unspecified bit rate (best effort).
ubrPcr Unspecified Bit Rate with Peak Cell Rate limit.
nrtVbr Non-realtime Variabl… | column | Enumeration | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.6 |
| juniAaaAssignDomainAtmPcr Peak Cell Rate, in kilobits per second (kbps), of this circuit.
This parameter is only required when juniAaaAssignDomainAtmServiceLevel
is configured to have one of… | column | kbps Unsigned32 | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.7 |
| juniAaaAssignDomainAtmScr Sustained Cell Rate, in kilobits per second (kbps), of this circuit.
This parameter is only required when juniAaaAssignDomainAtmServiceLevel
is configured to have o… | column | kbps Unsigned32 | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.8 |