juniAaaAssignDomainAtmServiceLevel

Juniper-AAA-MIB · .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.6
MIB view Table view

Object

column r/w Enumeration 
The Service category for this circuit:
ubr         Unspecified bit rate (best effort).
ubrPcr      Unspecified Bit Rate with Peak Cell Rate limit.
nrtVbr      Non-realtime Variable Bit Rate.
cbr         Constant bit rate.
rtVbr       Realtime Variable Bit Rate.
              
Set the service level in combination of the traffic attributes
PCR/SCR/MBS in the following matrix for successfull configurations.
              
 ServiceLevel     PCR       SCR        MBS
 ------------------------------------------
 ubr              omit      omit       omit
 ubrPcr           must      omit       omit
 nrtVbr           must      must       must
 cbr              must      omit       omit
 rtVbr            must      must       must

Context

MIB
Juniper-AAA-MIB
OID
.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.6
Type
column
Access
readwrite
Status
current
Parent
juniAaaAssignDomainEntry
Table
juniAaaAssignDomainTable
Siblings
20

Syntax

Enumeration

Values & Constraints

Enumerated Values
0none
1ubr
2ubrPcr
3nrtVbr
4cbr
5rtVbr

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
juniAaaAssignDomainName
The domain name uniquely identifying this entry.
columnJuniAaaDomainName.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.1
juniAaaAssignDomainOverrideUserName
The override user name associated with this entry. This object is used to override the user name of the remote client.
columnOctetString.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.10
juniAaaAssignDomainOverridePassword
The override password for the user name defined by juniAaaAssignDomainOverrideUserName. This object is used to override the password part of the username/password pair of the rem…
columnOctetString.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.11
juniAaaAssignDomainStripDomain
Enables/disables the domain name stripping feature, which causes the system to strip the domain name before sending the access-request to RADIUS for authentication.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.12
juniAaaAssignDomainPoolName
The name of the local address pool from which to allocate an IP address for the subscriber when none is returned from the authentication server.
columnOctetString.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.13
juniAaaAssignDomainLocalInterface
The local interface, associated with the specified virtual router, whose IP address is used as the source address when transmitting IP packets on remote access user links.
columnOctetString.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.14
juniAaaAssignDomainIpv6RouterName
The name of the virtual router to which remote access users within this domain are assigned for IPv6 interfaces.
columnJuniper-TCJuniName.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.15
juniAaaAssignDomainIpv6LocalInterface
The local interface, associated with the specified virtual router, whose IPv6 address is used as the source address when transmitting IPv6 packets on remote access user links.
columnOctetString.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.16
juniAaaAssignDomainTunnelGroup
The tunnel group assigned to this domain map. Non default configuration of this object cannot coexist with matching tunnel entries in juniAaaAssignDomainTunnelTable.
columnJuniAaaTunnelGroupName.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.17
juniAaaAssignDomainAuthRouterName
The name of the virtual router where remote access users within this domain will be authenticated.
columnJuniper-TCJuniName.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.18
juniAaaAssignDomainIpRouterName
The name of the virtual router to which remote access users within this domain are assigned for IP interfaces.
columnJuniper-TCJuniName.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.19
juniAaaAssignDomainRowStatus
Controls creation/deletion of entries in this table. Only the values 'createAndGo' and 'destroy' may be SET.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.2
juniAaaAssignDomainTunnelSubscriberAuthentication
When there are tunnel configurations under this domain, enable or disable subscribers of this domain authenticate with configured authentication server.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.20
juniAaaAssignDomainBackupPoolName
The name of the backup local address pool from which to allocate an IP address for the subscriber when the primary address pool is 100% allocated
columnOctetString.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.21
juniAaaAssignDomainRouterName deprecated
This variable is replaced by juniAaaAssignDomainAuthRouterName and juniAaaAssignDomainIpRouterName. It returns same value as juniAaaAssignDomainAuthRouterName.
columnJuniper-TCJuniName.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.3
juniAaaAssignDomainLoopback obsolete
The number of the loopback interface, associated with the specified virtual router, whose IP address is used as the source address when transmitting IP packets on unnumbered remot…
columnInteger32.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.4
juniAaaAssignDomainIpHint
Enables/disables the IP hint feature, which causes the system to allocate an IP address before going to RADIUS for authentication.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.5
juniAaaAssignDomainAtmPcr
Peak Cell Rate, in kilobits per second (kbps), of this circuit. This parameter is only required when juniAaaAssignDomainAtmServiceLevel is configured to have one of…
columnkbps Unsigned32.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.7
juniAaaAssignDomainAtmScr
Sustained Cell Rate, in kilobits per second (kbps), of this circuit. This parameter is only required when juniAaaAssignDomainAtmServiceLevel is configured to have o…
columnkbps Unsigned32.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.8
juniAaaAssignDomainAtmMbs
Maximum Burst Size, in cells, of this circuit. This parameter is only required when juniAaaAssugbDomainAtmServiceLevel is configured to have one of the following va…
columncells Unsigned32.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.9