juniAaaAssignDomainLoopback
Juniper-AAA-MIB ·
.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.4
Object
column
obsolete
r/w
Integer32
The number of the loopback interface, associated with the specified
virtual router, whose IP address is used as the source address when
transmitting IP packets on unnumbered remote access user links.
For example, if the associated loopback interface for this domain/router
was configured via the console as 'loopback 2', this object would
contain the integer value 2.
A value of -1 indicates the loopback interface is unspecified.
Context
- MIB
- Juniper-AAA-MIB
- OID
.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.4- Type
- column
- Access
- readwrite
- Status
- obsolete
- Parent
- juniAaaAssignDomainEntry
- Table
- juniAaaAssignDomainTable
- Siblings
- 20
Syntax
Integer32
Values & Constraints
Object Constraints
range: -1-32000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniAaaAssignDomainName The domain name uniquely identifying this entry. | column | JuniAaaDomainName | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.1 |
| juniAaaAssignDomainOverrideUserName The override user name associated with this entry. This object is used
to override the user name of the remote client. | column | OctetString | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.10 |
| juniAaaAssignDomainOverridePassword The override password for the user name defined by
juniAaaAssignDomainOverrideUserName. This object is used to override
the password part of the username/password pair of the rem… | column | OctetString | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.11 |
| juniAaaAssignDomainStripDomain Enables/disables the domain name stripping feature, which causes the
system to strip the domain name before sending the access-request to
RADIUS for authentication. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.12 |
| juniAaaAssignDomainPoolName The name of the local address pool from which to allocate an IP address
for the subscriber when none is returned from the authentication
server. | column | OctetString | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.13 |
| juniAaaAssignDomainLocalInterface The local interface, associated with the specified virtual router,
whose IP address is used as the source address when transmitting
IP packets on remote access user links. | column | OctetString | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.14 |
| juniAaaAssignDomainIpv6RouterName The name of the virtual router to which remote access users within this
domain are assigned for IPv6 interfaces. | column | Juniper-TCJuniName | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.15 |
| juniAaaAssignDomainIpv6LocalInterface The local interface, associated with the specified virtual router,
whose IPv6 address is used as the source address when transmitting IPv6
packets on remote access user links. | column | OctetString | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.16 |
| juniAaaAssignDomainTunnelGroup The tunnel group assigned to this domain map. Non default
configuration of this object cannot coexist with matching tunnel
entries in juniAaaAssignDomainTunnelTable. | column | JuniAaaTunnelGroupName | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.17 |
| juniAaaAssignDomainAuthRouterName The name of the virtual router where remote access users within this
domain will be authenticated. | column | Juniper-TCJuniName | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.18 |
| juniAaaAssignDomainIpRouterName The name of the virtual router to which remote access users within this
domain are assigned for IP interfaces. | column | Juniper-TCJuniName | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.19 |
| juniAaaAssignDomainRowStatus Controls creation/deletion of entries in this table. Only the values
'createAndGo' and 'destroy' may be SET. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.2 |
| juniAaaAssignDomainTunnelSubscriberAuthentication When there are tunnel configurations under this domain, enable or
disable subscribers of this domain authenticate with configured
authentication server. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.20 |
| juniAaaAssignDomainBackupPoolName The name of the backup local address pool from which to allocate an IP address
for the subscriber when the primary address pool is 100% allocated | column | OctetString | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.21 |
| juniAaaAssignDomainRouterName deprecated This variable is replaced by juniAaaAssignDomainAuthRouterName and
juniAaaAssignDomainIpRouterName. It returns same value as
juniAaaAssignDomainAuthRouterName. | column | Juniper-TCJuniName | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.3 |
| juniAaaAssignDomainIpHint Enables/disables the IP hint feature, which causes the system to
allocate an IP address before going to RADIUS for authentication. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.5 |
| juniAaaAssignDomainAtmServiceLevel The Service category for this circuit:
ubr Unspecified bit rate (best effort).
ubrPcr Unspecified Bit Rate with Peak Cell Rate limit.
nrtVbr Non-realtime Variabl… | column | Enumeration | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.6 |
| juniAaaAssignDomainAtmPcr Peak Cell Rate, in kilobits per second (kbps), of this circuit.
This parameter is only required when juniAaaAssignDomainAtmServiceLevel
is configured to have one of… | column | kbps Unsigned32 | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.7 |
| juniAaaAssignDomainAtmScr Sustained Cell Rate, in kilobits per second (kbps), of this circuit.
This parameter is only required when juniAaaAssignDomainAtmServiceLevel
is configured to have o… | column | kbps Unsigned32 | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.8 |
| juniAaaAssignDomainAtmMbs Maximum Burst Size, in cells, of this circuit.
This parameter is only required when juniAaaAssugbDomainAtmServiceLevel
is configured to have one of the following va… | column | cells Unsigned32 | .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.9 |