IEEE8023-MAU-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
59

rpMauTable

table
.1.3.111.2.802.3.1.13.1.1.1 · 1 row entry · 10 columns
Open in standard view 
Table of descriptive and status information
about the MAU(s) attached to the ports of a
repeater.
rpMauEntry entry .1.3.111.2.802.3.1.13.1.1.1.1
An entry in the table, containing information
about a single MAU.
Indexes
rpMauGroupIndex rpMauPortIndex rpMauIndex
Column Syntax OID
rpMauGroupIndex
This variable uniquely identifies the group
containing the port to which the MAU described
by this entry is connected.

Note: In practice, a group will generally be
a field-replaceable unit (i.e., module,…
Integer32
Constraints:
range: 1-2147483647
 .1.3.111.2.802.3.1.13.1.1.1.1.1
rpMauPortIndex
This variable uniquely identifies the repeater
port within group rpMauGroupIndex to which the
MAU described by this entry is connected.
Integer32
Constraints:
range: 1-2147483647
 .1.3.111.2.802.3.1.13.1.1.1.1.2
rpMauIndex
This variable uniquely identifies the MAU
described by this entry from among other
MAUs connected to the same port
(rpMauPortIndex).
Integer32
Constraints:
range: 1-2147483647
 .1.3.111.2.802.3.1.13.1.1.1.1.3
rpMauType
This object identifies the MAU type. Values for
standard IEEE 802.3 MAU types are defined in the
IANA maintained IANA-MAU-MIB module, as
OBJECT-IDENTITIES of dot3MauType.
If the MAU type is unknown, the object identifie…
SNMPv2-TCAutonomousType
Textual Convention: SNMPv2-TCAutonomousType ObjectIdentifier
 .1.3.111.2.802.3.1.13.1.1.1.1.4
rpMauStatus
The current state of the MAU. This object may
be implemented as a read-only object by those
agents and MAUs that do not implement software
control of the MAU state. Some agents may not
support setting the value of this …
Enumerationr/w
Enumerated Values:
1other
2unknown
3operational
4standby
5shutdown
6reset
 .1.3.111.2.802.3.1.13.1.1.1.1.5
rpMauMediaAvailable
This object identifies Media Available state of
the MAU, complementary to the rpMauStatus. Values
for the standard IEEE 802.3 Media Available states
are defined in the IANA maintained IANA-MAU-MIB
module, as IANAifMauMe…
IANA-MAU-MIBIANAifMauMediaAvailable
Textual Convention: IANA-MAU-MIBIANAifMauMediaAvailable Enumeration
Type Values:
1other
2unknown
3available
4notAvailable
5remoteFault
6invalidSignal
7remoteJabber
8remoteLinkLoss
9remoteTest
10offline
11autoNegError
12pmdLinkFault
13wisFrameLoss
14wisSignalLoss
15pcsLinkFault
16excessiveBER
17dxsLinkFault
18pxsLinkFault
19availableReduced
20ready
 .1.3.111.2.802.3.1.13.1.1.1.1.6
rpMauMediaAvailableStateExits
A count of the number of times that
rpMauMediaAvailable for this MAU instance leaves
the state available(3).

Discontinuities in the value of this counter can
occur at re-initialization of the management
s…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.111.2.802.3.1.13.1.1.1.1.7
rpMauJabberState
The value other(1) is returned if the jabber
state is not 2, 3, or 4. The agent shall
return other(1) for MAU type dot3MauTypeAUI.

The value unknown(2) is returned when the MAU's
true state is unknown; fo…
Enumeration
Enumerated Values:
1other
2unknown
3noJabber
4jabbering
 .1.3.111.2.802.3.1.13.1.1.1.1.8
rpMauJabberingStateEnters
A count of the number of times that
mauJabberState for this MAU instance enters the
state jabbering(4). For MAUs of type
dot3MauTypeAUI, dot3MauType100BaseT4,
dot3MauType100BaseTX, dot3MauType100BaseFX, and
all 1000 Mb/…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.111.2.802.3.1.13.1.1.1.1.9
rpMauFalseCarriers
A count of the number of false carrier events
during IDLE in 100BASE-X links. This counter
does not increment at the symbol rate. It can
increment after a valid carrier completion at a
maximum rate of once per 100 ms un…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.111.2.802.3.1.13.1.1.1.1.10

rpJackTable

table
.1.3.111.2.802.3.1.13.1.1.2 · 1 row entry · 2 columns
Open in standard view 
Information about the external jacks attached
to MAUs attached to the ports of a repeater.
rpJackEntry entry .1.3.111.2.802.3.1.13.1.1.2.1
An entry in the table, containing information
about a particular jack.
Indexes
rpMauGroupIndex rpMauPortIndex rpMauIndex rpJackIndex
Column Syntax OID
rpJackIndex
This variable uniquely identifies the jack
described by this entry from among other jacks
attached to the same MAU (rpMauIndex).
Integer32
Constraints:
range: 1-2147483647
 .1.3.111.2.802.3.1.13.1.1.2.1.1
rpJackType
The jack connector type, as it appears on the
outside of the system.
IANA-MAU-MIBIANAifJackType
Textual Convention: IANA-MAU-MIBIANAifJackType Enumeration
Type Values:
1other
2rj45
3rj45S
4db9
5bnc
6fAUI
7mAUI
8fiberSC
9fiberMIC
10fiberST
11telco
12mtrj
13hssdc
14fiberLC
15cx4
16sfpPlusDA
 .1.3.111.2.802.3.1.13.1.1.2.1.2

ifMauTable

table
.1.3.111.2.802.3.1.13.1.2.1 · 1 row entry · 31 columns
Open in standard view 
Table of descriptive and status information
about MAU(s) attached to an interface.
ifMauEntry entry .1.3.111.2.802.3.1.13.1.2.1.1
An entry in the table, containing information
about a single MAU.
Indexes
ifMauIfIndex ifMauIndex
Column Syntax OID
ifMauIfIndex
This variable uniquely identifies the interface
to which the MAU described by this entry is
connected.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.111.2.802.3.1.13.1.2.1.1.1
ifMauIndex
This variable uniquely identifies the MAU
described by this entry from among other MAUs
connected to the same interface (ifMauIfIndex).
Integer32
Constraints:
range: 1-2147483647
 .1.3.111.2.802.3.1.13.1.2.1.1.2
ifMauType
This object identifies the MAU type. Values for
standard IEEE 802.3 MAU types are defined in the
IANA maintained IANA-MAU-MIB module, as
OBJECT-IDENTITIES of dot3MauType.
If the MAU type is unknown, the object identifie…
SNMPv2-TCAutonomousType
Textual Convention: SNMPv2-TCAutonomousType ObjectIdentifier
 .1.3.111.2.802.3.1.13.1.2.1.1.3
ifMauStatus
The current state of the MAU. This object may
be implemented as a read-only object by those
agents and MAUs that do not implement software
control of the MAU state. Some agents may not
support setting the value of this …
Enumerationr/w
Enumerated Values:
1other
2unknown
3operational
4standby
5shutdown
6reset
 .1.3.111.2.802.3.1.13.1.2.1.1.4
ifMauMediaAvailable
This object identifies Media Available state of
the MAU, complementary to the ifMauStatus. Values
for the standard IEEE 802.3 Media Available states
are defined in the IANA maintained IANA-MAU-MIB
module, as IANAifMauMe…
IANA-MAU-MIBIANAifMauMediaAvailable
Textual Convention: IANA-MAU-MIBIANAifMauMediaAvailable Enumeration
Type Values:
1other
2unknown
3available
4notAvailable
5remoteFault
6invalidSignal
7remoteJabber
8remoteLinkLoss
9remoteTest
10offline
11autoNegError
12pmdLinkFault
13wisFrameLoss
14wisSignalLoss
15pcsLinkFault
16excessiveBER
17dxsLinkFault
18pxsLinkFault
19availableReduced
20ready
 .1.3.111.2.802.3.1.13.1.2.1.1.5
ifMauMediaAvailableStateExits
A count of the number of times that
ifMauMediaAvailable for this MAU instance leaves
the state available(3).

Discontinuities in the value of this counter can
occur at re-initialization of the management
s…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.111.2.802.3.1.13.1.2.1.1.6
ifMauJabberState
The value other(1) is returned if the jabber
state is not 2, 3, or 4. The agent shall
return other(1) for MAU type dot3MauTypeAUI.

The value unknown(2) is returned when the MAU's
true state is unknown; fo…
Enumeration
Enumerated Values:
1other
2unknown
3noJabber
4jabbering
 .1.3.111.2.802.3.1.13.1.2.1.1.7
ifMauJabberingStateEnters
A count of the number of times that
mauJabberState for this MAU instance enters the
state jabbering(4). This counter will
indicate zero for MAUs of type dot3MauTypeAUI
and those of speeds above 10 Mb/s.

D…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.111.2.802.3.1.13.1.2.1.1.8
ifMauFalseCarriers
A count of the number of false carrier events
during IDLE in 100BASE-X and 1000BASE-X links.

For all other MAU types, this counter will
indicate zero. This counter does not
increment at the symbol rate.
…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.111.2.802.3.1.13.1.2.1.1.9
ifMauDefaultType
This object identifies the default
administrative baseband MAU type to be used in
conjunction with the operational MAU type
denoted by ifMauType.

The set of possible values for this object is
the same as …
SNMPv2-TCAutonomousTyper/w
Textual Convention: SNMPv2-TCAutonomousType ObjectIdentifier
 .1.3.111.2.802.3.1.13.1.2.1.1.10
ifMauAutoNegSupported
This object indicates whether or not
Auto-Negotiation is supported on this MAU.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.111.2.802.3.1.13.1.2.1.1.11
ifMauTypeListBits
A value that uniquely identifies the set of
possible IEEE 802.3 types that the MAU could be.
If Auto-Negotiation is present on this MAU, this
object will map to ifMauAutoNegCapabilityBits.

Note that this …
IANA-MAU-MIBIANAifMauTypeListBits
Textual Convention: IANA-MAU-MIBIANAifMauTypeListBits Bits
Type Values:
0bOther
1bAUI
2b10base5
3bFoirl
4b10base2
5b10baseT
6b10baseFP
7b10baseFB
8b10baseFL
9b10broad36
10b10baseTHD
11b10baseTFD
12b10baseFLHD
13b10baseFLFD
14b100baseT4
15b100baseTXHD
16b100baseTXFD
17b100baseFXHD
18b100baseFXFD
19b100baseT2HD
20b100baseT2FD
21b1000baseXHD
22b1000baseXFD
23b1000baseLXHD
24b1000baseLXFD
25b1000baseSXHD
26b1000baseSXFD
27b1000baseCXHD
28b1000baseCXFD
29b1000baseTHD
30b1000baseTFD
31b10GbaseX
32b10GbaseLX4
33b10GbaseR
34b10GbaseER
35b10GbaseLR
36b10GbaseSR
37b10GbaseW
38b10GbaseEW
39b10GbaseLW
40b10GbaseSW
41b10GbaseCX4
42b2BaseTL
43b10PassTS
44b100BaseBX10D
45b100BaseBX10U
46b100BaseLX10
47b1000BaseBX10D
48b1000BaseBX10U
49b1000BaseLX10
50b1000BasePX10D
51b1000BasePX10U
52b1000BasePX20D
53b1000BasePX20U
54b10GbaseT
55b10GbaseLRM
56b1000baseKX
57b10GbaseKX4
58b10GbaseKR
59b10G1GbasePRXD1
60b10G1GbasePRXD2
61b10G1GbasePRXD3
62b10G1GbasePRXU1
63b10G1GbasePRXU2
64b10G1GbasePRXU3
65b10GbasePRD1
66b10GbasePRD2
67b10GbasePRD3
68b10GbasePRU1
69b10GbasePRU3
70b40GbaseKR4
71b40GbaseCR4
72b40GbaseSR4
73b40GbaseFR
74b40GbaseLR4
75b100GbaseCR10
76b100GbaseSR10
77b100GbaseLR4
78b100GbaseER4
79b1000baseT1
80b1000basePX30D
81b1000basePX30U
82b1000basePX40D
83b1000basePX40U
84b10G1GbasePRXD4
85b10G1GbasePRXU4
86b10GbasePRD4
87b10GbasePRU4
88b25GbaseCR
89b25GbaseCRS
90b25GbaseKR
91b25GbaseKRS
92b25GbaseR
93b25GbaseSR
94b25GbaseT
95b40GbaseER4
96b40GbaseR
97b40GbaseT
98b100GbaseCR4
99b100GbaseKR4
100b100GbaseKP4
101b100GbaseR
102b100GbaseSR4
103b2p5GbaseT
104b5GbaseT
 .1.3.111.2.802.3.1.13.1.2.1.1.12
ifMauHCFalseCarriers
A count of the number of false carrier events
during IDLE in 100BASE-X and 1000BASE-X links.

For all other MAU types, this counter will
indicate zero. This counter does not
increment at the symbol rate.
…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.111.2.802.3.1.13.1.2.1.1.13
ifMauPCSCodingViolations
Generalized nonresettable counter. This counter
has a maximum increment rate of 25 000 000
counts per second for 100 Mb/s implementations and
125 000 000 counts per second for 1000 Mb/s
implementations.
…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.111.2.802.3.1.13.1.2.1.1.14
ifMauFECAbility
A read-only value that indicates if the
PHY supports an optional FEC sublayer for
forward error correction (see IEEE Std 802.3, 65.2
and IEEE Std 802.3, Clause 74).

If an IEEE Std 802.3 Clause 45 MDIO …
Enumeration
Enumerated Values:
1unknown
2supported
3notsupported
 .1.3.111.2.802.3.1.13.1.2.1.1.15
ifMauFECMode
A read-write value that indicates the mode of
operation of the optional FEC sublayer for forward
error correction (see IEEE Std 802.3, 65.2 and
IEEE Std 802.3, Clause 74).

A GET operation returns the cu…
Enumerationr/w
Enumerated Values:
1unknown
2disabled
3enabled
 .1.3.111.2.802.3.1.13.1.2.1.1.16
ifMauFECCorrectedBlocks deprecated
********** THIS OBJECT IS DEPRECATED **********

Generalized nonresettable counter. This counter
has a maximum increment rate of 1 200 000
counts per second for 1000 Mb/s implementations,
and 5 000 000 c…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.111.2.802.3.1.13.1.2.1.1.17
ifMauFECUnCorrectableBlocks deprecated
********** THIS OBJECT IS DEPRECATED **********

Generalized nonresettable counter. This counter
has a maximum increment rate of 1 200 000
counts per second for 1000 Mb/s implementations,
and 5 000 000 c…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.111.2.802.3.1.13.1.2.1.1.18
ifMauSNROpMarginChnlA
The current SNR operating margin measured at the
slicer input for channel A for the 10GBASE-T PMA.
It is reported in units of 0.1 dB to an accuracy of
0.5 dB within the range of -12.7 dB to 12.7 dB.
If an IEEE Std 8…
Integer32
Constraints:
range: -127-127
 .1.3.111.2.802.3.1.13.1.2.1.1.19
ifMauSNROpMarginChnlB
The current SNR operating margin measured at the
slicer input for channel B for the 10GBASE-T PMA.
It is reported in units of 0.1 dB to an accuracy of
0.5 dB within the range of -12.7 dB to 12.7 dB.
If an IEEE Std 8…
Integer32
Constraints:
range: -127-127
 .1.3.111.2.802.3.1.13.1.2.1.1.20
ifMauSNROpMarginChnlC
The current SNR operating margin measured at the
slicer input for channel C for the 10GBASE-T PMA.
It is reported in units of 0.1 dB to an accuracy of
0.5 dB within the range of -12.7 dB to 12.7 dB.
If an IEEE Std 8…
Integer32
Constraints:
range: -127-127
 .1.3.111.2.802.3.1.13.1.2.1.1.21
ifMauSNROpMarginChnlD
The current SNR operating margin measured at the
slicer input for channel D for the 10GBASE-T PMA.
It is reported in units of 0.1 dB to an accuracy of
0.5 dB within the range of -12.7 dB to 12.7 dB.
If an IEEE Std 8…
Integer32
Constraints:
range: -127-127
 .1.3.111.2.802.3.1.13.1.2.1.1.22
ifMauEEESupportList
A read-only list of the possible PHY types for which
the underlying system supports Energy-Efficient Ethernet
(EEE) as defined in IEEE Std 802.3 Clause 78.
IANA-MAU-MIBIANAifMauTypeListBits
Textual Convention: IANA-MAU-MIBIANAifMauTypeListBits Bits
Type Values:
0bOther
1bAUI
2b10base5
3bFoirl
4b10base2
5b10baseT
6b10baseFP
7b10baseFB
8b10baseFL
9b10broad36
10b10baseTHD
11b10baseTFD
12b10baseFLHD
13b10baseFLFD
14b100baseT4
15b100baseTXHD
16b100baseTXFD
17b100baseFXHD
18b100baseFXFD
19b100baseT2HD
20b100baseT2FD
21b1000baseXHD
22b1000baseXFD
23b1000baseLXHD
24b1000baseLXFD
25b1000baseSXHD
26b1000baseSXFD
27b1000baseCXHD
28b1000baseCXFD
29b1000baseTHD
30b1000baseTFD
31b10GbaseX
32b10GbaseLX4
33b10GbaseR
34b10GbaseER
35b10GbaseLR
36b10GbaseSR
37b10GbaseW
38b10GbaseEW
39b10GbaseLW
40b10GbaseSW
41b10GbaseCX4
42b2BaseTL
43b10PassTS
44b100BaseBX10D
45b100BaseBX10U
46b100BaseLX10
47b1000BaseBX10D
48b1000BaseBX10U
49b1000BaseLX10
50b1000BasePX10D
51b1000BasePX10U
52b1000BasePX20D
53b1000BasePX20U
54b10GbaseT
55b10GbaseLRM
56b1000baseKX
57b10GbaseKX4
58b10GbaseKR
59b10G1GbasePRXD1
60b10G1GbasePRXD2
61b10G1GbasePRXD3
62b10G1GbasePRXU1
63b10G1GbasePRXU2
64b10G1GbasePRXU3
65b10GbasePRD1
66b10GbasePRD2
67b10GbasePRD3
68b10GbasePRU1
69b10GbasePRU3
70b40GbaseKR4
71b40GbaseCR4
72b40GbaseSR4
73b40GbaseFR
74b40GbaseLR4
75b100GbaseCR10
76b100GbaseSR10
77b100GbaseLR4
78b100GbaseER4
79b1000baseT1
80b1000basePX30D
81b1000basePX30U
82b1000basePX40D
83b1000basePX40U
84b10G1GbasePRXD4
85b10G1GbasePRXU4
86b10GbasePRD4
87b10GbasePRU4
88b25GbaseCR
89b25GbaseCRS
90b25GbaseKR
91b25GbaseKRS
92b25GbaseR
93b25GbaseSR
94b25GbaseT
95b40GbaseER4
96b40GbaseR
97b40GbaseT
98b100GbaseCR4
99b100GbaseKR4
100b100GbaseKP4
101b100GbaseR
102b100GbaseSR4
103b2p5GbaseT
104b5GbaseT
 .1.3.111.2.802.3.1.13.1.2.1.1.23
ifMauEEELDFastRetrainCount
A count of the number of 10GBASE-T fast retrains
initiated by the local device. The indication reflects
the state of the PHY event counter (see IEEE Std 802.3,
45.2.1.78.2 and 55.4.5.1.)
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.111.2.802.3.1.13.1.2.1.1.24
ifMauEEELPFastRetrainCount
A count of the number of 10GBASE-T fast retrains
initiated by the link partner. The indication reflects
the state of the PHY event counter (see IEEE Std 802.3,
45.2.1.78.1 and 55.4.5.1.)
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.111.2.802.3.1.13.1.2.1.1.25
ifMauTimeSyncCapabilityTX
This object indicates whether or not transmit
Time Sync is supported on this MAU.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.111.2.802.3.1.13.1.2.1.1.26
ifMauTimeSyncCapabilityRX
This object indicates whether or not receive
Time Sync is supported on this MAU.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.111.2.802.3.1.13.1.2.1.1.27
ifMauTimeSyncDelayTXmax
The maximum data delay as specified in IEEE Std 802.3
90.7, expressed in units of ns.

If an IEEE Std 802.3 Clause 45 MDIO Interface to
PMA/PMD, WIS, PCS, PHY XS, DTE XS and/or TC is
present, then the va…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.111.2.802.3.1.13.1.2.1.1.28
ifMauTimeSyncDelayTXmin
The minimum data delay as specified in IEEE Std 802.3
90.7, expressed in units of ns.

If an IEEE Std 802.3 Clause 45 MDIO Interface to
PMA/PMD, WIS, PCS, PHY XS, DTE XS and/or TC is
present, then the va…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.111.2.802.3.1.13.1.2.1.1.29
ifMauTimeSyncDelayRXmax
The maximum data delay as specified in IEEE Std 802.3
90.7, expressed in units of ns.

If an IEEE Std 802.3 Clause 45 MDIO Interface to
PMA/PMD, WIS, PCS, PHY XS, DTE XS and/or TC is
present, then the va…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.111.2.802.3.1.13.1.2.1.1.30
ifMauTimeSyncDelayRXmin
The minimum data delay as specified in IEEE Std 802.3
90.7, expressed in units of ns.

If an IEEE Std 802.3 Clause 45 MDIO Interface to
PMA/PMD, WIS, PCS, PHY XS, DTE XS and/or TC is
present, then the va…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.111.2.802.3.1.13.1.2.1.1.31

ifJackTable

table
.1.3.111.2.802.3.1.13.1.2.2 · 1 row entry · 2 columns
Open in standard view 
Information about the external jacks attached
to MAUs attached to an interface.
ifJackEntry entry .1.3.111.2.802.3.1.13.1.2.2.1
An entry in the table, containing information
about a particular jack.
Indexes
ifMauIfIndex ifMauIndex ifJackIndex
Column Syntax OID
ifJackIndex
This variable uniquely identifies the jack
described by this entry from among other jacks
attached to the same MAU.
Integer32
Constraints:
range: 1-2147483647
 .1.3.111.2.802.3.1.13.1.2.2.1.1
ifJackType
The jack connector type, as it appears on the
outside of the system.
IANA-MAU-MIBIANAifJackType
Textual Convention: IANA-MAU-MIBIANAifJackType Enumeration
Type Values:
1other
2rj45
3rj45S
4db9
5bnc
6fAUI
7mAUI
8fiberSC
9fiberMIC
10fiberST
11telco
12mtrj
13hssdc
14fiberLC
15cx4
16sfpPlusDA
 .1.3.111.2.802.3.1.13.1.2.2.1.2

ifMauPerPCSLaneStatsTable

table
.1.3.111.2.802.3.1.13.1.2.3 · 1 row entry · 5 columns
Open in standard view 
Table of Per-PCS lane status information
about MAUs attached to an interface.
ifMauPerPCSLaneStatsEntry entry .1.3.111.2.802.3.1.13.1.2.3.1
An entry in the table, containing information
about a single PCS lane.
Indexes
ifMauIfIndex ifMauIndex ifPCSLaneIndex
Column Syntax OID
ifPCSLaneIndex
This object provides the identification of the
PCS lane for which this ifMauPerPCSLaneStatsEntry
is applicable. This object can hold an integer value
from 0 to N-1, where N is the total number of PCS
lanes supported …
Unsigned32
Constraints:
range: 0-255
 .1.3.111.2.802.3.1.13.1.2.3.1.1
ifMauPPLFECCorrectedBlocks
Generalized nonresettable counter. This counter has a
maximum increment rate of 1 200 000 counts per second
for 1000 Mb/s implementations, 5 000 000 counts per
second for 10 Gb/s and 40 Gb/s implementations, and
2 5…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.111.2.802.3.1.13.1.2.3.1.2
ifMauPPLFECUncorrectableBlocks
Generalized nonresettable counter. This counter has a
maximum increment rate of 1 200 000 counts per second
for 1000 Mb/s implementations, 5 000 000 counts
per second for 10 Gb/s and 40 Gb/s implementations,
and 2 5…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.111.2.802.3.1.13.1.2.3.1.3
ifMauBIPErrorCount
Generalized nonresettable counter. This counter
has a maximum increment rate of 10 000 counts per
second for 40 Gb/s implementations and 5 000 counts
per second for 100 Gb/ s implementations.

For 40/10…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.111.2.802.3.1.13.1.2.3.1.4
ifMauPCStoPHYLaneMapping
For 40/100GBASE-R PHYs, an array of PCS lane
identifiers. The indices of this array (0 to n?1)
denote the service interface lane number where n is
the number of PCS lanes in use. Each element of
this array contains …
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.111.2.802.3.1.13.1.2.3.1.5

ifMauAutoNegTable

table
.1.3.111.2.802.3.1.13.1.5.1 · 1 row entry · 9 columns
Open in standard view 
Configuration and status objects for the
Auto-Negotiation function of MAUs attached to
interfaces.
          
The ifMauAutoNegTable applies to systems in
which Auto-Negotiation is supported on one or
more MAUs attached to interfaces. Note that if
Auto-Negotiation is present and enabled, the
ifMauType object reflects the result of the
Auto-Negotiation function.
ifMauAutoNegEntry entry .1.3.111.2.802.3.1.13.1.5.1.1
An entry in the table, containing configuration
and status information for the Auto-Negotiation
function of a particular MAU.
Indexes
ifMauIfIndex ifMauIndex
Column Syntax OID
ifMauAutoNegAdminStatus
Setting this object to enabled(1) will cause
the interface that has the Auto-Negotiation
signaling ability to be enabled.

If the value of this object is disabled(2) then
the interface will act as it would…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.111.2.802.3.1.13.1.5.1.1.1
ifMauAutoNegRemoteSignaling
A value indicating whether the remote end of
the link is using Auto-Negotiation signaling. It
takes the value detected(1) if and only if,
during the previous link negotiation, FLP Bursts
were received.
Enumeration
Enumerated Values:
1detected
2notdetected
 .1.3.111.2.802.3.1.13.1.5.1.1.2
ifMauAutoNegConfig
A value indicating the current status of the
Auto-Negotiation process. The enumeration
parallelDetectFail(5) maps to a failure in
parallel detection as defined in 28.2.3.1 of
IEEE Std 802.3.
Enumeration
Enumerated Values:
1other
2configuring
3complete
4disabled
5parallelDetectFail
 .1.3.111.2.802.3.1.13.1.5.1.1.4
ifMauAutoNegRestart
If the value of this object is set to
restart(1) then this will force Auto-Negotiation
to begin link renegotiation. If Auto-Negotiation
signaling is disabled, a write to this object
has no effect.
Setting the value of t…
Enumerationr/w
Enumerated Values:
1restart
2norestart
 .1.3.111.2.802.3.1.13.1.5.1.1.5
ifMauAutoNegCapabilityBits
A value that uniquely identifies the set of
capabilities of the local Auto-Negotiation
entity. Note that interfaces that support this
MIB may have capabilities that extend beyond the
scope of this MIB.

No…
IANA-MAU-MIBIANAifMauAutoNegCapBits
Textual Convention: IANA-MAU-MIBIANAifMauAutoNegCapBits Bits
Type Values:
0bOther
1b10baseT
2b10baseTFD
3b100baseT4
4b100baseTX
5b100baseTXFD
6b100baseT2
7b100baseT2FD
8bFdxPause
9bFdxAPause
10bFdxSPause
11bFdxBPause
12b1000baseX
13b1000baseXFD
14b1000baseT
15b1000baseTFD
16b10GbaseT
17b1000baseKX
18b10GbaseKX4
19b10GbaseKR
20b40GbaseKR4
21b40GbaseCR4
22b100GbaseCR10
23b1000baseT1
24b25GbaseRS
25b25GbaseR
26bRSFEC25Greq
27bBaseFEC25Greq
28b25GbaseT
29b40GbaseT
30b100GbaseCR4
31b100GbaseKR4
32b100GbaseKP4
33bForceMS
 .1.3.111.2.802.3.1.13.1.5.1.1.6
ifMauAutoNegCapAdvertisedBits
A value that uniquely identifies the set of
capabilities advertised by the local
Auto-Negotiation entity.

Capabilities in this object that are not
available in ifMauAutoNegCapabilityBits cannot
be enabled…
IANA-MAU-MIBIANAifMauAutoNegCapBitsr/w
Textual Convention: IANA-MAU-MIBIANAifMauAutoNegCapBits Bits
Type Values:
0bOther
1b10baseT
2b10baseTFD
3b100baseT4
4b100baseTX
5b100baseTXFD
6b100baseT2
7b100baseT2FD
8bFdxPause
9bFdxAPause
10bFdxSPause
11bFdxBPause
12b1000baseX
13b1000baseXFD
14b1000baseT
15b1000baseTFD
16b10GbaseT
17b1000baseKX
18b10GbaseKX4
19b10GbaseKR
20b40GbaseKR4
21b40GbaseCR4
22b100GbaseCR10
23b1000baseT1
24b25GbaseRS
25b25GbaseR
26bRSFEC25Greq
27bBaseFEC25Greq
28b25GbaseT
29b40GbaseT
30b100GbaseCR4
31b100GbaseKR4
32b100GbaseKP4
33bForceMS
 .1.3.111.2.802.3.1.13.1.5.1.1.7
ifMauAutoNegCapReceivedBits
A value that uniquely identifies the set of
capabilities received from the remote
Auto-Negotiation entity.
Note that interfaces that support this MIB may
be attached to remote Auto-Negotiation entities
that have capabil…
IANA-MAU-MIBIANAifMauAutoNegCapBits
Textual Convention: IANA-MAU-MIBIANAifMauAutoNegCapBits Bits
Type Values:
0bOther
1b10baseT
2b10baseTFD
3b100baseT4
4b100baseTX
5b100baseTXFD
6b100baseT2
7b100baseT2FD
8bFdxPause
9bFdxAPause
10bFdxSPause
11bFdxBPause
12b1000baseX
13b1000baseXFD
14b1000baseT
15b1000baseTFD
16b10GbaseT
17b1000baseKX
18b10GbaseKX4
19b10GbaseKR
20b40GbaseKR4
21b40GbaseCR4
22b100GbaseCR10
23b1000baseT1
24b25GbaseRS
25b25GbaseR
26bRSFEC25Greq
27bBaseFEC25Greq
28b25GbaseT
29b40GbaseT
30b100GbaseCR4
31b100GbaseKR4
32b100GbaseKP4
33bForceMS
 .1.3.111.2.802.3.1.13.1.5.1.1.8
ifMauAutoNegRemoteFaultAdvertised
A value that identifies any local fault
indications that this MAU has detected and will
advertise at the next Auto-Negotiation
interaction for 1000 Mb/s MAUs.
Enumerationr/w
Enumerated Values:
1noError
2offline
3linkFailure
4autoNegError
 .1.3.111.2.802.3.1.13.1.5.1.1.9
ifMauAutoNegRemoteFaultReceived
A value that identifies any fault indications
received from the far end of a link by the
local Auto-Negotiation entity for 1000 Mb/s
MAUs.
Enumeration
Enumerated Values:
1noError
2offline
3linkFailure
4autoNegError
 .1.3.111.2.802.3.1.13.1.5.1.1.10